The national high-tech enterprise,Jiaozuo Zhenjieneng Environmental Protection Equipment Technology Co., ltd, which was established in 1991, is an internationally renowned supplier of high humidity and high viscosity drying equipment, specializing in engineering design, technology research and development and equipment manufacturing for drying materials such as sludge & solid waste, pulp and feed residue. Zhenjieneng Company Insists on continuous Innovation around customers' needs, pays attention to investment in engineering theoretical research, spur with long accumulation, and promotes the advancement of drying technology; To inspire the potential and create value for customers, to provide products, solutions and services with industry competitiveness and safety and reliability, with operations in many countries and regions in Asia, Europe and America. Ammonium sulfate is an excellent nitrogen fertilizer (commonly known as fertilizer powder), which is suitable for general soil and crops. It can make branches and leaves grow vigorously, improve fruit quality and yield, and enhance crops' resistance to disasters. Physical properties are colorless crystals or white particles. No smell. Ammonium sulfate will decompose into ammonia, nitrogen, sulfur dioxide and water vapor over 280. Therefore, the key to the drying of ammonium sulfate is the temperature control! It can be said that without the technology of good temperature control , there would be no ammonium sulfate drying! "Rotary Harrow Rolling Triple-level Multi-loop" and "Automatic Rake-turning and Segmenting Combined" high humidity and high viscosity series ammonium sulfate special drying equipmentï¼?produced by Jiaozuo ZJN Environmental Protection Equipment Technology Co., Ltd, adopts patented technologies of "low temperature and large air volume" and "automatic control of wind direction and temperature of tertiary air volume". It can automatically adjust to the most appropriate temperature according to the drying rate of ammonium sulfate. It is the most ideal drying equipment for ammonium sulfate. Ammonium sulfate drying, welcome to use the ammonium sulfate drying equipment produced by ZJN Energy Saving Co. Ltd.
Established in 1991, Jiaozuo Zhenjieneng Environmental Protection Equipment Technology Co., Ltd. Specializes in technology research, equipment manufacturing and project engineering for all kinds of high humid and viscous materials drying. Taken high- efficiency, energy-saving, practical as the principle, Our company dedicates innovating and developing technology for circular economy. It has got excellent achievements in drying technology in terms of high humid, viscous sludge and solid waste slag. It manages to keep in the front position in the rapid development of domestic drying technology field. Based on advanced, scientific management, integrity and pragmatic spirit, our company not only won more than 100 items of national patents, but also awarded in succession many national honors and titles, such as "scientific and technological achievements appraisal, China's top 500 private technology enterprise". "the honest demonstration enterprise and so on. In addition, our company has passed the ISO9001: 2008 international quality management system certification. ZJN Drying equipment for corn steep liquor mixed with fiber, which is produced by Jiaozuo ZJN Environmental Protection Equipment Technology Co., Ltd., must be the best choice for environment conservation. Our company is a famous enterprise that is committed to energy conservation and environmental protection industry, and is actively committed to the comprehensive utilization of "three wastes" and is full of social responsibility. ZJN Drying equipment for corn steep liquor mixed with fiber was developed mainly aiming at corn fibers, which are a kind of high-quality fodder with strong viscosity, high solid content, high oil fat content, and containing high protein and high energy. The traditional single-stage drum drying process has poor quality of dried finished products. The drying is uneven in dry and wet or wet outside, dry and wet inside. Our Drying equipment for corn steep liquor mixed with fiber is different from the previous drying mode. The equipment adopts three-stage multi-loop reciprocating drying and is specially equipped with special material guiding and lifting devices. Its drying materials have nice color, energy saving and high efficiency. It is the best choice for you to dry corn steep liquor mixed with fiber. Welcome to our company to buy drying equipment for corn steep liquor mixed with fiber. It is really energy saving and drying, really energy saving and environment friendly. We look forward to your call for advice!
Feed dryer The national high-tech enterprise,Jiaozuo Zhenjieneng Environmental Protection Equipment Technology Co., ltd, which was established in 1991, is an internationally renowned supplier of high humidity and high viscosity drying equipment, specializing in engineering design, technology research and development and equipment manufacturing for drying materials such as sludge & solid waste, pulp and feed residue. Zhenjieneng Company Insists on continuous Innovation around customers' needs, pays attention to investment in engineering theoretical research, spur with long accumulation, and promotes the advancement of drying technology; To inspire the potential and create value for customers, to provide products, solutions and services with industry competitiveness and safety and reliability, with operations in many countries and regions in Asia, Europe and America. Jiaozuo ZJN feed dryer is the first choice for energy conservation. Jiaozuo ZJN Environmental Protection Equipment Technology Co., Ltd. is a manufacturer that is committed to the energy-saving and environmental protection industry, actively committed to the comprehensive utilization of "three wastes" and is full of social responsibility. the "direct current vortex plus alternating current reciprocating three-stage multi-circuit" feed dryer is a patented product of our company and has passed the examination and approval of various national patents. The traditional drying process has high temperature in it, so it can damage the nutritional ingredients of feed. Our company adopts a three-stage & low-temperature drying process, and the equipment is specially equipped with special material guiding and lifting devices, so that the materials are heated evenly in the dryer, and the contact area between the materials and hot air is increased. The whole drying process is temperature-appropriate drying. The dried feed has high value, energy saving, high efficiency and low cost. So it is the best choice for you to dry feed. The ZJN feed dryer is advanced in technology, stable in equipment operation,and it is safe, reliable, convenient to install and debug, and it is a big well-known brand. Welcome to come to our company to purchase feed dryer, feed drying equipment and feed drying machinery, and look forward to your call for consultation!
PFB150 Rod Extruder Features: Save time and money. PLC design and easy to operate. Long time span. No heating effect during operation. With latest technology and optimized design. Min - Max Dia:25-80mm. Production Per Hour: 7-12+ kg/h. Automatic operation. Polymer PTFE ROD RAM EXTRUDER AUTOMATIC MACHINE Product Description: Sunkoo PFB80 Rod Extruder(Teflon PTFE Rod extrusion) is designed using latest technology, fully reliable and easy to operate for customers. Performance in terms of production and working hour capacity is competitive to other machines. Low maintenance is required , giving high production in market. RAM Extruder For PTFE Rod(25-80mm) application: 1.Horizontal Ram Extruder for PTFE rod 2.Ram extruding machine for PTFE rod 3.Using for Pre-sintering PTFE material. 4.Suit for new PTFE material or Recycle PTFE material. PFB80 Rod Extruder Features Include: 1. Save time and money, good advantage price offer to customers. 2. Intelligent and easy-to-use operations. 3. Small workplace required due to its compact design and electricity saving machine. 4. Super quality output and the physical properties is adjustable. 5. Precise temperature control, reaches + -1 degree. 6. Long- life, with modern technology and optimized design. The Extrusion Process of PFB80 Rod Extruder: Ram extrusion is a process enabling the continuous production and processing of PTFE (Polytetrafluoroethylene). The basic material is PTFE powder. The powder is fed into a cylindrical extrusion pipe, compressed by means of a ram and at the same time, transported through the pipe, which is heated up to sintering temperature.
It is very important to choose different drying processes for different materials and to choose the correct drying process. Jiaozuo ZJN Environmental Protection Equipment Technology Co., Ltd. is a manufacturer which dedicated to the professional research, production and sales of dryers in the energy-saving and environment-friendly industry. Rice bran is rich in protein and has high nutritional value. The traditional drying method does not aim at the characteristics of rice bran. The dried finished products are uneven in drying and wetting or dry outside and wet inside. Our company has made continuous research and exploration. The newly developed "rotary rake rolling triple-stage multi-loop" fast rice bran dryer adopts a three-stage drying process, and the equipment is specially equipped with unique guiding, lifting and scattering devices, so that the materials are evenly heated in the dryer, and heat energy is fully utilized. The whole drying process is suitable for the change of rice bran moisture content. Its drying effect is good and its quality is excellent. So it is the best choice for you to dry rice bran. It is really an energy-saving rice bran dryer, a big brand, and makes you feel relieved to choose and buy. Welcome to come to our company to buy rice bran dryer, rice bran drying equipment, and rice bran drying machinery, and look forward to your cooperation!
ZJN Drying equipment for corn steep liquor mixed with fiber, which is produced by Jiaozuo ZJN Environmental Protection Equipment Technology Co., Ltd., must be the best choice for environment conservation. Our company is a famous enterprise that is committed to energy conservation and environmental protection industry, and is actively committed to the comprehensive utilization of "three wastes" and is full of social responsibility. ZJN Drying equipment for corn steep liquor mixed with fiber was developed mainly aiming at corn fibers, which are a kind of high-quality fodder with strong viscosity, high solid content, high oil fat content, and containing high protein and high energy. The traditional single-stage drum drying process has poor quality of dried finished products. The drying is uneven in dry and wet or wet outside, dry and wet inside. Our Drying equipment for corn steep liquor mixed with fiber is different from the previous drying mode. The equipment adopts three-stage multi-loop reciprocating drying and is specially equipped with special material guiding and lifting devices. Its drying materials have nice color, energy saving and high efficiency. It is the best choice for you to dry corn steep liquor mixed with fiber. Welcome to our company to buy drying equipment for corn steep liquor mixed with fiber. It is really energy saving and drying, really energy saving and environment friendly. We look forward to your call for advice!
Jiaozuo ZJN feed dryer is the first choice for energy conservation. Jiaozuo ZJN Environmental Protection Equipment Technology Co., Ltd. is a manufacturer that is committed to the energy-saving and environmental protection industry, actively committed to the comprehensive utilization of "three wastes" and is full of social responsibility. the "direct current vortex plus alternating current reciprocating three-stage multi-circuit" feed dryer is a patented product of our company and has passed the examination and approval of various national patents. The traditional drying process has high temperature in it, so it can damage the nutritional ingredients of feed. Our company adopts a three-stage & low-temperature drying process, and the equipment is specially equipped with special material guiding and lifting devices, so that the materials are heated evenly in the dryer, and the contact area between the materials and hot air is increased. The whole drying process is temperature-appropriate drying. The dried feed has high value, energy saving, high efficiency and low cost. So it is the best choice for you to dry feed. The ZJN feed dryer is advanced in technology, stable in equipment operation,and it is safe, reliable, convenient to install and debug, and it is a big well-known brand. Welcome to come to our company to purchase feed dryer, feed drying equipment and feed drying machinery, and look forward to your call for consultation!
The "direct current vortex plus alternating current reciprocating three-stage multi-loop" special dryer for quickly mixing corn husks is a patented product of Jiaozuo ZJN Environmental Protection Equipment Technology Co., Ltd. It has passed the examination and approval of various national patents, and mainly aimed at mixing corn husks with high solid content and high protein and nutritional value. Our company adopts a three-stage drying process and is specially equipped with special material guiding and lifting devices so that the materials are heated evenly in the dryer. The contact area between materials and hot air is greatly increased. The whole drying process is suitable for the change of moisture content of corn husk mixed with pulp. The dried materials have the same color and luster, which is very ideal. The equipment has also received many honorary certificates issued by the state. It has been successfully applied in many famous domestic enterprises and has received unanimous favorable comments from the customers. If you are interested in purchasing our products, then welcome to come to our company for on-site inspection and order. You can also call us for information consultation. It is really energy-saving and dry, and really energy-saving and environment-friendly!
The best choice for energy conservation is Jiaozuo ZJN special dryer for corn steep liquor. Our company is a manufacturer dedicated to the research, production and sales of dryers in the energy-saving and environmental protection industry. The special dryer for corn steep liquor "DC vortex plus AC reciprocating type" developed by our company is a patented product of our company and has passed the examination and approval of various national patents. It is mainly aimed at corn steep liquor which is a high-quality feed with strong viscosity, high solid content, high oil and fat content, high protein and energy content. The traditional single-stage drum drying process has poor quality of the dried finished products, uneven drying and wetting or external drying and internal wetting. Our company adopts a three-stage low-temperature drying process, and the equipment is specially equipped with special material guiding and lifting devices, so that the materials can make full use of heat energy in the dryer, thus greatly increasing the contact area between the materials and hot air. The S-shaped material conveying mode increases the whole drying process. Its drying effect is obviously better than the previous single-stage drum drying process. Its drying color is good, energy-saving and efficient, and it is the best choice for you to dry corn pulp. The special dryer for cornsteep liquor is really energy-saving, large brand, trustworthy, and we are looking forward to your call!
Sweet potato residue is rich in crude fiber and vitamins, which are ideal raw materials for feed manufacturers. ZJN sweet potato residue dryer is elaborately designed according to market demand. The equipment adopts the leading drying technology in China. The dried sweet potato residue has moderate water content, fresh color and good nutritional ingredients. ZJN sweet potato residue dryer is energy-saving and environment-friendly, low in energy consumption, high in yield and capable of saving factory floor space. For the purchase of sweet potato residue dryer, please pay attention to ZJN sweet potato residue dryer produced by Jiaozuo ZJN Environmental Protection Equipment Technology Co., ltd., this sweet potato residue dryer adopts the patented technology of "rotary harrow rolling triple-level multi-loop" and "direct current vortex plus alternating current reciprocating" feeding process. Its unique design and ideal effect become the favorite of enterprises using sweet potato residue dryer! ZJN Co. Ltd. provides 24-hour technical service for customer service. If you need a sweet potato residue dryer, come to ZJN Co. Ltd.! I believe our ZJN potato residue dryer will you happy and come back satisfied!
For drying potato residue, our ZJN brand potato residue dryer should be selected. Jiaozuo ZJN Environmental Protection Equipment Technology co., ltd. independently developed and produced the "rotary harrow rolling triple-level multi-loop" high-humidity and high-viscosity potato residue dryer with more than 100 national patent technologies, which adopts the domestic leading drying technology and brings good news to potato residue drying enterprises. ZJN Brand Potato Residue Dryer has high efficiency and low energy consumption! It is really energy-saving and environment-friendly. Real effect! ZJN Potato Residue Dryer is the bane of high-humidity and high-viscosity materials and the terminator of the drying problem of high-humidity and high-viscosity materials. Since ZJN has come out, there has been no drying problem in the world! Don't worry about the drying problem, it really saves energy and helps you solve the problem. New drying concept, precise process design, perfect craftsman products, and considerate service attitude can make you hold hands with real energy conservation once and for all, and never leave! No matter how high the mountain is and how deep the water is , and no matter how long the journey is , ZJN will embrace guests from all over the world with a fervent heart. And our potato residue dryer is your choice without complaint or regret.
Fusmar is the professional manufacturer of the fish feed pellet machine and production line. The capacity of the wet fish feed production line is from 500KG/H to 3000KG/H. This fish feed production line is new developed for home and commercial aquatic fishery. In order to meet the intensive production of animal fish feed pellets, the production line has multi specifications. It can produce shrinking fish feed pellets,floating fish feed pellets,pet feed, animal feed.
Mainly used for a variety of aquatic products, pet and other pellet feed curing molding process (such as: float and sink of fish feed, frog feed, pellet suckling pig feed).
The utility model relates to a multifunctional wheat fertilizing and seeding machine, which is suitable for the cultivation of a 15-100 horsepower tractor, and is suitable for fertilizing and seeding corn in plain and hilly areas. The utility model has the advantages of good universality, wide adaptation range, uniform seeding and the like. The machine is suitable for planting wheat in a variety of terrains, the separation of the seed box and the fertilizer box, the addition of seeds and fertilizer, and the adoption of the stainless steel surface of the new fertilizer feeding bucket. Detailed Images 1. Connection with Tractor (1) Machine driven by >30 hp Tractor . (2) There are 16 speeds of seeding system .The rate of fertilization can be adjusted. 3. Fertilizer Hose 1. PVC material has good tensile and compressive strength 2. PVC material has low fluid resistance: the wall of PVC-U pipe is very smooth, and the resistance to fluid is very small, and its roughness coefficient is only 0.009. 3. PVC material is excellent in corrosion resistance and chemical resistance. 4. PVC material anti-bite: PVC-U tube is not a source of nutrients, so it will not be attacked by rodents.
The oven is 8 cone capacity. An Automatic rotating oven operated on electrical of single phase 230v or 110v provided. Any requested colour is done. This oven can cook 120 pizza cones per hour. stainless steel inner chamber.
1. Filled puffed snack processing line introduction Filled puffed snack processing line is mainly made up with raw materials treatment system, extrusion system, drying system, flavoring system and controlling system. It has high stability and automatic performance, which offers the possibility to control the expansion of the extrudate through various means to control the texture of the final product. Filled puffed snack processing line core technology is co-rotating twin-screw extrusion. Twin-screw extruder is the core of this line, enabling the continuous production of expanded snack. 2. Filled puffed snack processing line description: 2.1 Flow chart: raw materials---extrusion---filling---cutting---drying---flavoring---cooling---packing 2.2 Filled puffed snack processing line features: 2.2.1 High work efficiency, automation degree, materials usage, application range. 2.2.2 Low land occupation, power consumption, labor cost, waste rate. 2.2.3 Various configurations and capacity choices. 2.2.4 This line can not only make filled puffed snacks, but also make most puffed snacks by direct cutting. 2.2.5 Production factors can be quantified and controlled. 2.2.6 World-class food grade fittings. 2.2.7 All machines and fittings can be custom-made. ODM or OEM is available. 2.2.8 Professional pre-sale, sale and after-sale service. 3. Filled puffed snack samples introduction Basing on modern extrusion technique, filled puffed snack is made from cereals powder, filling material, vitamins and minerals as raw materials, which is fit for different age grades people. After being inflated and heated, its volume is expanded. It leads to the change of its organization structure. This food is multihole, fluffy and crispy, which is one of the most popular foods in the world. 4. Packing and delivery 4.1 Inside package is plastic film, outside package is wooden/plywood cases, which is seaworthy. 4.2 We can supply fumigation package and certificate. 5. Service 5.1 1 year warranty period. 5.2 Supply free fittings and general tool. 5.3 Engineers available to service machinery overseas. 5.4 Supply formula of raw materials. 5.5 Workshop design suggestion.
1. Fried corn curls processing line Fried corn curls processing line is mainly made up with raw materials treatment system, extrusion system, frying system, flavoring system and controlling system. It has high stability and automatic performance. Its core technology is extrusion and frying. It can be different configuration basing on different extruders, fryers and flavoring machines. 2. Fried corn curls processing line description 2.1 Flow chart: raw materials---extrusion---frying---flavoring---cooling---packing 2.2 Fried corn curls processing line features: 2.2.1 High work efficiency, automation degree, materials usage, application range. 2.2.2 Low land occupation, power consumption, labor cost, waste rate. 2.2.3 Various configurations and capacity choices. 2.2.4 Production factors can be quantified and controlled. 2.2.5 World-class food grade fittings. 2.2.6 All machines and fittings can be custom-made. ODM or OEM is available. 2.2.7 Professional pre-sale, sale and after-sale service. 3. Fried corn curls introduction Fried corn curl is one of deep fried snacks, which is very popular in the world. The International representative brands are Cheetos, Kurkures and Nik Naks. Corn curl is made from corn grits by special extruder. Its shape is irregular stick, and its mouthfeel is crisp. After being flavored by different seasoners, corn curl is received different population and markets.
1. Artificial rice processing line introduction Artificial rice processing line is mainly made up with raw materials treatment system, extrusion system, drying system and controlling system. It has high stability and automatic performance, which offers the possibility to control the expansion of the extrudate through various means to control the texture of the final product. Artificial rice processing line core technology is co-rotating twin-screw extrusion. Twin-screw extruder is the core of this line, enabling the continuous production of expanded snack. 2. Artificial rice processing line description 2.1 Flow chart: raw materials---extrusion---screening---drying---cooling---packing 2.2 Artificial rice processing line features: 2.2.1 High work efficiency, automation degree, materials usage, application range. 2.2.2 Low land occupation, power consumption, labor cost, waste rate. 2.2.4 Various finished products sizes and shapes. 2.2.5 Production factors can be quantified and controlled. 2.2.6 World-class food grade fittings. 2.2.7 All machines and fittings can be custom-made. ODM or OEM is available. 2.2.8 Professional pre-sale, sale and after-sale service. 2.2.9 Extruder adopts cooling system to control temperature. 3. Artificial rice processing line introduction Artificial rice is a new food based on extrusion technology. Adopting rice flour, broken rice (should be milled) as main raw material, artificial rice is made by extrusion and drying processes. Artificial rice has the advantages of great taste, easy-to-cook, eutrophy, strong functionality (such as sugar-free rice, medicinal rice) etc. Right now, more and more consumers and units received artificial rice.
1. Expanded snack processing line Expanded snack processing line is mainly made up with raw materials treatment system, extrusion system, drying system, flavoring system and controlling system. It has high stability and automatic performance, which offers the possibility to control the expansion of the extrudate through various means to control the texture of the final product. 2. Expanded snack processing line description: 2.1 Flow chart: raw materials---extrusion---drying---flavoring---cooling---packing 2.2 Expanded snack processing line features: 2.2.1 High work efficiency, automation degree, materials usage, application range. 2.2.2 Low land occupation, power consumption, labor cost, waste rate. 2.2.3 Various configurations and capacity choices. 2.2.4 Various finished products sizes and shapes. 2.2.5 Production factors can be quantified and controlled. 2.2.6 World-class food grade fittings. 2.2.7 All machines and fittings can be custom-made. ODM or OEM is available. 2.2.8 Professional pre-sale, sale and after-sale service. 3. Expanded snack samples introduction Basing on modern extrusion technique, expanded snack is made from cereals powder, vitamins and minerals as raw materials, which is fit for different age grades people. After being inflated and heated, its volume is expanded. It leads to the change of its organization structure. This food is multihole, fluffy and crispy, which is one of the most popular foods in the world. -
1. Expanded fish feed processing line introduction Expanded fish feed processing line is mainly made up with raw materials treatment system, extrusion system, drying system, flavoring system and controlling system. Its core technology is co-rotating twin-screw extrusion. This line can make both floating fish feed and sinking fish feed. After changing formula, it can make dry pet food (such as dog food, cat food). 2. Expanded fish feed processing line description: 2.1 Flow chart: raw materials treatment---extrusion---drying---flavoring---cooling---packing 2.2 Expanded fish feed processing line features 2.2.1 High work efficiency, automation degree, materials usage, application range. 2.2.2 Low land occupation, power consumption, labor cost, waste rate. 2.2.3 This line is multi-function processing line, it can make floating fish fee, sinking fish feed, dog food, cat food etc. 2.2.4 Production factors can be quantified and controlled. 2.2.5 All machines and fittings can be custom-made. ODM/OEM is available. 3. Expanded fish feed samples introduction Adopting cereals, vegetable proteins, vitamins, minerals, fish meal and fish oil as raw materials, and adopting dry-type or wet-type extrusion as manufacturing technique, modern fish feed is made for both carnivorous and graminivorous fishes, which is in the form of granules or pellets situation. It improves digestibility and refining the balance of nutrients to match the needs of the different species of fish more precisely at different periods of development, improve the sustainability of the ingredients used, and improve efficiency of feeding also contributes to sustainability.
