A pipe long nipple is a short length of pipe with threaded ends that is used to connect two pipes or fittings. Pipe long nipples are available in a variety of sizes and thread types to fit different applications. Technical Specifications 1. Size: 1/8 Inch to 4 Inch Customized Up to 12â?? 2. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 3. Thread: NPT, BSP, BSPT Applications Pipe long nipples are used in a variety of applications, including: a. Connecting two pipes b. Extending a pipe run c. Tapping into a pipe d. Repairing a leaking pipe e. Adding a fitting to a pipe Safety Precautions When working with pipe long nipples, it is important to take the following safety precautions: A. Use the correct size and type of nipple for the application. B. Make sure the nipple is properly threaded and tightened. C. Do not overtighten the nipple, as this could damage the threads. D. Use gloves and eye protection when working with pipe long nipples.
A pipe short nipple is a short length of pipe with threaded ends It is used to connect two pipes or to extend a pipe Description A pipe short nipple is a cylindrical tube with threaded ends The length of the nipple is typically less than 12 inches The diameter of the nipple is typically the same as the diameter of the pipes that it is connecting Technical Specifications The following are some of the technical specifications of a pipe short nipple 1 Size 18 Inch to 4 Inch Customized Up to 12 2 Material Carbon steel Alloy Steel Stainless steel Duplex 3 Thread NPT BSP BSPT Applications Pipe short nipples are used in a variety of applications including A Connecting two pipes B Extending a pipe C Tapping into a pipe D Mounting valves and fittings E Repairing leaks Safety Precautions When working with pipe short nipples it is important to take the following safety precautions a Use the correct size and type of nipple for the application b Do not overtighten the nipples c Use thread sealant to prevent leaks d Be aware of the pressure and temperature ratings of the nipples
A pipe closed nipple is a short, threaded pipe fitting that has closed ends. It is typically used to connect two pipes or to tee off a pipe. Pipe closed nipples are available in a variety of materials, including steel, stainless steel, brass, and plastic. They are also available in a variety of sizes, with the most common sizes being 1/4 inch, 3/8 inch, and 1/2 inch. Here is a technical specification of a pipe closed nipple: 1. Size: 1/8 Inch to 4 Inch Customized Up to 12â?? 2. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 3. Thread: NPT, BSP, BSPT When choosing a pipe closed nipple, it is important to consider the material, size, thread type, and length. It is also important to make sure that the nipple is compatible with the other components in the system. Here are some additional things to keep in mind when using pipe closed nipples: A. Pipe closed nipples should be tightened to the correct torque specification to prevent leaks. B. Pipe closed nipples should not be used in applications where they will be exposed to high temperatures or corrosive chemicals. C. Pipe closed nipples should be inspected regularly for leaks and damage.
A forged union is a type of pipe fitting that is used to connect two pipes. It is made of a single piece of metal that is forged, or shaped, into a specific design. Forged unions are typically made of steel, stainless steel, or brass. Technical Specifications The technical specifications of a forged union vary depending on the material it is made of, the size of the pipe it is designed to connect, and the pressure rating it is designed to withstand. However, some common technical specifications for forged unions include: 1. Size: 1/8 Inch to 3 Inch 2. Class: 3,000#, 6,000# Lbs. 3. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 4. Thread: NPT, BSP, BSPT Applications Forged unions are used in a variety of applications, including: 1. Plumbing 2. HVAC 3. Process piping 4. Oil and gas 5. Chemical processing 6. Marine Advantages of Forged Unions Forged unions offer a number of advantages over other types of pipe fittings, including: A. Strength: Forged unions are very strong and can withstand high pressures. B. Durability: Forged unions are very durable and can withstand a lot of wear and tear. C. Flexibility: Forged unions can be used in a variety of applications. D. Easy to install: Forged unions are easy to install and do not require any special tools. Overall, forged unions are a versatile and reliable type of pipe fitting that is well-suited for a variety of applications. They are strong, durable, and easy to install, making them a good choice for many projects.
A forged hex nipple reducing size is a type of threaded pipe fitting that is made by forging, a process that involves shaping metal by hammering or pressing it. It has a hexagonal head on one end and a threaded bore on the other end. The bore is smaller than the outside diameter of the nipple, which allows it to be used to reduce the size of a pipe. Technical Specifications: The following are the technical specifications of a forged hex nipple reducing size: 1. Size: 1/8 Inch to 2 Inch 2. Class: 3,000#, 6,000# Lbs. 3. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 4. Finish: The nipple is available in a variety of finishes, including hot-dipped galvanized, black oxide, and electroplated nickel. 5. Strength: The nipple is strong and durable, and can withstand a variety of stresses. 6. Thread: NPT, BSP, BSPT Applications: Forged hex nipple reducing sizes are used in a variety of applications, including: 1. Plumbing 2. HVAC (heating, ventilation, and air conditioning) 3. Machinery 4. Automotive 5. Oil and gas Advantages: The following are some of the advantages of using forged hex nipple reducing sizes: 1. They are strong and durable. 2. They can withstand high pressure and temperatures. 3. They are corrosion resistant. 4. They are easy to install. Overall, forged hex nipple reducing sizes are a versatile and reliable type of pipe fitting that can be used in a variety of applications. They are strong, durable, and corrosion resistant, making them a good choice for demanding environments. However, they are also more expensive than other types of pipe fittings and may not be available in all sizes.
A forged hex nipple full size is a type of threaded fastener that is made from a single piece of metal that has been forged into shape. The nipple has a hexagonal head on one end and a threaded shank on the other end. The nipple is used to connect two pipes or other components together. Technical specification: The following are the technical specifications of a forged hex nipple full size: 1. Size: 1/8 Inch to 2 Inch 2. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 3. Finish: The nipple is available in a variety of finishes, including hot-dipped galvanized, black oxide, and electroplated nickel. 4. Strength: The nipple is strong and durable, and can withstand a variety of stresses. 5. Thread: NPT, BSP, BSPT Applications: Forged hex nipples full size are used in a variety of applications, including: 1. Plumbing 2. HVAC 3. Machinery 4. Construction 5. Oil and gas 6. Marine Advantages: The advantages of using forged hex nipples full size include: 1. Strength and durability 2. Wide range of sizes and materials available 3. Variety of finishes available 4. Easy to install 5. Long service life Overall, forged hex nipples full size are a versatile and reliable type of threaded fastener that is used in a variety of applications. They are strong, durable, and easy to install, making them a good choice for many projects.
A forged square plug is a type of threaded fitting that is used to block the end of a pipe or tube It is made of a solid piece of metal that is forged into a square shape with a threaded bore The threaded bore allows the plug to be screwed into the end of the pipe or tube Technical Specifications The technical specifications of a forged square plug vary depending on the material used the size and the pressure rating However some common specifications include Specifications 1 Material Steel stainless steel or other metal 2 Standard ASMEANSI B1611 3 Size 12 inch to 4 inches in diameter 4 Pressure rating 100 to 10000 psi 5 Thread NPT SAE or BSPP 6 Finish Black galvanized or other coating Applications Forged square plugs are used in a variety of applications including Oil and gas pipelines Chemical processing plants Water treatment facilities Power plants HVAC systems Marine applications Advantages The advantages of using a forged square plug include Strong and durable construction Threaded bore for easy installation Wide range of materials and sizes available Can be used in highpressure applications Overall a forged square plug is a versatile and reliable type of threaded fitting that can be used in a variety of applications It is a good choice for applications where strength durability and a wide range of materials and sizes are required
Product Description: A forged hex plug is a type of pipe fitting that is used to seal the end of a threaded pipe. It is made of a solid piece of metal that is forged into a hexagonal shape. The threaded end of the plug is compatible with a variety of pipe thread standards, such as NPT, BSP, and BSPT. Specifications: A. Material: Carbon steel, Alloy steel or Stainless steel, B. Size: 1/2 inch to 4 inches in diameter C. Class: 3000, 6000 Lbs. D. Pressure rating: 100 to 10,000 psi E. Thread: NPT, SAE, or BSPP F. Standard: ASME/ANSI B16.11 G. Finish: Black, galvanized, or other coating Applications: Forged hex plugs are used in a variety of applications, including: A. Oil and gas pipelines B. Chemical plants C. Power plants D. Water treatment plants E. HVAC systems F. Plumbing systems G. General purpose applications Benefits: Forged hex plugs offer a number of benefits, including: a) Strong and durable construction b) Long service life c) Threaded end for compatibility with a variety of pipe thread standards d) Available in a variety of materials and finishes to meet specific requirements
A Forged Round Head Plug is a type of pipe fitting that is used to block the flow of fluid through a pipe. It is made of a solid piece of metal that is forged into the desired shape. The head of the plug is round and has a threaded bore that allows it to be screwed into a pipe. The following are the product description and specifications of a forged round plug: â?? Product description: A Round head plug is a mechanical fitting used to block the flow of fluid in a pipe. It is made of a solid piece of metal, typically Carbon steel, Alloy steel or Stainless steel, and has a threaded bore that allows it to be screwed into a pipe. The head of the plug is round and may be flat or domed. â?? Specifications: A. Material: Carbon steel, Alloy steel or Stainless steel, B. Size: 1/2 inch to 4 inches in diameter C. Class: 3000, 6000 Lbs. D. Pressure rating: 100 to 10,000 psi E. Thread: NPT, SAE, or BSPP F. Standard: ASME/ANSI B16.11 G. Finish: Black, galvanized, or other coating Forged Round head plugs are used in a variety of applications, including: â?? Plumbing â?? HVAC â?? Fire sprinkler systems â?? Oil and gas pipelines â?? Chemical processing â?? Water treatment They are a reliable and durable type of pipe fitting that can withstand high pressures and temperatures. Here are some additional information about forged round plugs: â?? They are typically made of carbon steel or stainless steel. â?? They are available in a variety of sizes and pressure ratings. â?? They can be threaded or socket welded. â?? They are often used in high-pressure applications, such as fire sprinkler systems and oil and gas pipelines. â?? They are also used in low-pressure applications, such as plumbing and HVAC systems. Round head plugs are a versatile and reliable type of pipe fitting that can be used in a variety of applications. They are a good choice for applications where strength, durability, and pressure resistance are important.
Specifications ASTM B366 / ASME SB366 Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 Size Seamless Butt Weld Fittings: 1/2â?³ â?? 10â?³, Welded Butt Weld Fittings: 1/2â?³ â?? 48â?³ Type Seamless / Welded / Fabricated Schedule Sch 5 TO Sch XXS. Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80 etc.
Specifications ASTM B564 & ASME SB564 Standard ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 Size 1/8â?? NB to 4â?? NB (Socketweld & Screwed-Threaded) Class 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS Type Socketweld Fittings, Screwed-Threaded Fittings
Specifications ASTM B462 & ASME SB462 Standard ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 Size 1/8â?? NB to 4â?? NB (Socketweld & Screwed-Threaded) Class 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS Type Socketweld Fittings, Screwed-Threaded Fittings
Specifications ASTM B366 ASME SB366 Dimensions ASMEANSI B169 ASME B1628 MSSSP43 Size Seamless Butt Weld Fittings 12 10 Welded Butt Weld Fittings 12 48 Type Seamless Welded Fabricated Schedule Sch 5 TO Sch XXS Thickness 20 Swg 18 Swg 16 Swg 14 Swg 12 Swg 10 Swg amp Sch 10 Sch 40 Sch 80 etc
Specifications ASTM B564 & ASME SB564 Standard ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 Size 1/8â?? NB to 4â?? NB (Socketweld & Screwed-Threaded) Class 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS Type Socketweld Fittings, Screwed-Threaded Fittings
Specifications ASTM B366 / ASME SB366 Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 Size Seamless Butt Weld Fittings: 1/2â?³ â?? 10â?³, Welded Butt Weld Fittings: 1/2â?³ â?? 48â?³ Type Seamless / Welded / Fabricated Schedule Sch 5 TO Sch XXS. Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80 etc.
Specifications ASTM B381 & ASME SB381 Standard ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 Size 1/8â?? NB to 4â?? NB (Socketweld & Screwed-Threaded) Class 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS Type Socketweld Fittings, Screwed-Threaded Fittings
Specifications ASTM B363 / ASME SB363 Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 Size Seamless Butt Weld Fittings: 1/2â?³ â?? 10â?³, Welded Butt Weld Fittings: 1/2â?³ â?? 48â?³ Type Seamless / Welded / Fabricated Schedule Sch 5 TO Sch XXS. Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80 etc.
Standard ASTM B574 / ASME SB574 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Specifications ASTM B564 & ASME SB564 Standard ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 Size 1/8â?? NB to 4â?? NB (Socketweld & Screwed-Threaded) Class 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS Type Socketweld Fittings, Screwed-Threaded Fittings
Specifications ASTM B366 / ASME SB366 Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 Size Seamless Butt Weld Fittings: 1/2â?³ â?? 10â?³, Welded Butt Weld Fittings: 1/2â?³ â?? 48â?³ Type Seamless / Welded / Fabricated Schedule Sch 5 TO Sch XXS. Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80 etc.
