Material: ductile iron (DI). Standard: ISO2531,BS EN545, BS EN598, AWWA C219, AWWA C110, ASME B16.42. Internal lining: 1. cement mortar, 2. Sulphuric Resistance Cement, 3. Sulphuric Resistance Cement and Epoxy, 4. H.A.cement; external coated: 1. zinc and bitumen, 2. zinc and 2 epoxy coatings, 3. Metallic Zinc and a coating of suitable etching prima and 2 Epoxy Coatings, 4. zinc and PU. Suitable medium: potable water, drainage, sewage, waste water. Suitable tempreture: -40centigrade degree - 125centigrade degree. Packing: plastic film plus pallet. Origin: China.
R (mm) = 1,2D r (mm) = 0,05D h1 (mm) >= 3,5 t h2 (mm) = 0,15D H (mm) = h1+ h2 V (mm³) = 0,06D³ (h1=0) m (kg) = 2Î Dp².t = t.m thickness: 4mm-40mm diameter: 800-8600mm
Manufactures fittings and fabrications for the repair, connection and branching of all types and sizes of pipe and with recognized International standards and most of the products are approved by various international testing agencies
Diameter enlargement is formed by using a blank smaller than the diameter of the large end of the pipe with an internal punching die along the inner diameter of the tube blank. The expanding process mainly solves the problem that it is not easy for the large diameter pipe to be formed by reducing. Sometimes, according to the need of material and product forming, the methods of expanding and reducing are combined. In the process of reducing or expanding deformation and pressing, cold or hot pressing is adopted according to different materials and changing sizes. Usually, cold pressing should be used as far as possible, but hot pressing should be used for severe work hardening caused by multiple diameter changes, thick wall or alloy steel materials.
Cold-drawn tee is a section of main pipe plus a small branch pipe. Obviously, two large sizes are main pipe, and the small size is branch pipe. In pure oxygen pipeline, there is usually pressure, at this time oxygen activity is greater. If cold-drawn tee is used, as long as the impurities in the tube move with oxygen flow, the change of flow velocity may cause impurities and pipes. The ignition of pure oxygen tubes may be caused by collision with the source of ignition or by electrostatic discharge due to the change of flow rate. The processing method of cold-drawn tee pipe fittings is to mark the cold-drawn tee where the pipeline is to be processed and break through the mark. Special equipment for cold-drawn tee pipe fittings: install ejection device on the pipe, which includes metal, jack, commutator, bracket, etc. When the metal rod is heated and the jack and metal rod are ejected outwards, the cold-drawn tee blank formed by the natural outward extrusion of the pipe wall material; and then weld a certain length of the corresponding specifications on the cold-drawn tee blank formed by the ejection, and give birth to the cold-drawn tee blank. Output of final products.
E ® HOSE BORE ¸ DIMENSIONS PART NO. THREAD E DN ·DASH A B H S2 21691-04-04 1/4"X18 6 4 30 4.6 40.5 19 21691-06-04 3/8"X18 6 4 30 6 37.7 22 21691-06-05 3/8"X18 8 5 34 6 40.7 22 21691-06-06 3/8"X18 10 6 35.3 6 45.3 22 21691-08-08 1/2"X14 12 8 41 7.5 53.2 27 21691-12-10 3/4"X14 16 10 56.6 8.9 53.2 32 21691-12-12 3/4"X14 20 12 65.5 8.9 69.1 32 21691-16-12T 1"X11.5 20 12 65.5 10.5 64.5 41 21691-16-16 1"X11.5 25 16 76.4 10.5 75 41 21691-20-20W 1.1/4"X11.5 32 20 91.5 11.2 86 50 21691-24-20T 1.1/2"X11.5 32 20 91.5 11.2 83.5 55 21691-24-24W 1.1/2"X11.5 40 24 109.4 11.2 101.5 55 21691-32-32W 2"X11.5 50 32 131.8 11.2 124.5 70
Product Type type PART No. MALE 24°CONE SEAT L.T. 1C MALE 24°CONE SEAT H.T. 1D O-RING MALE FLAT SEAT 1E MALE FLAT SEAT 1H MALE 60°CONE SEAT 1M METRIC MALE 60°CONE SEAT 1M-GM 60°METRIC MALE/60°METRIC MALE 1K
supply UNS N10001,N10665,N10675,N10629,N10624 alloy seamless pipes,sheets,forged flanges,buttweld fittings Plate,Sheet,Strip Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish;ASMEÂ SB335 / ASTM B335 forged bars,billets.E1473,B880,E8,E29,E55;ASME B16.9,B16.11 fittings,B899 Non-ferrous Metals and Alloys pipes,tubes
We professionally form UNS N06625,Inconel 625,alloy 625 materials as B444,SB-444 seamless and welded tubes,pipes,B704,SB-704 welded tubing,B705,SB-705 welded pipings,B366,SB-366 fittings,B443,SB-443 plates,sheets,B446,SB-446, B564,SB-564 forging bars,slabs with high quality in China UNS N06625,Inconel 625,alloy 625 Seamless pipes,seamless tubes,weld pipings,weld tubings, flanges,slip-ons,blinds,weld-necks,lapjoints,long welding necks,socket welds,elbows,tees,stub-ends,returns,caps,crosses,reducers,pipe nipples,Wires,sheet,plates,stockists,distributors,manufacturers,factory,factories,mills,works
We supply 925 alloy,UNS N08925 super austenitic stainless steel bars,billets,slabs,and form them into seamless pipes,tubes according to ASTM/ASME B677/SB-677, sheets,plates ASTM/ASME B625/SB-625
We smelt Alloy 25-6MO,alloy 926,UNS N08926,1.4529 slabs,billets,bars,and do processing formed into seamless tubes,pipes,welded piping,tubing,plates,sheets ASME SB-677,ASTM B677 Alloy 25-6MO,alloy 926,UNS N08926,1.4529 cold-worked seamless pipes,tubes,fittings,flanges
We supply UNS S32750,F53,1.4410,2507 super duplex stainless seamless tubes,pipes,welding tubings,plastes,strips,welding wires,sheets,u-tube,butt welding elbows,bends,tees
We supply ASME SA213,ASTM A312 253MA,UNS S30815,F44,1.4835 super austenitic stainless steel seamless pipes and tubes, SA182 forged flanges,,A276 bars heat resistant alloy 253MA,S30815,F44 super austenitic stainless steel seamless pipes and tubes, SA182 forged flanges,,A276 bars in high temperature heat resistant alloy with high strength and oxidation and sulfidation resistance in high temperature
We export Nickel-Chromium-Iron-Molybdenum-Copper Alloy UNS N06007 nickel alloy,specialty alloy seamless pipes,tubes,welded piping,elbows,tees,u-tube,reducers,butt weld fittings,flanges ASTM B622,ASME SB622 nickel base alloy seamless tubing,pipe,B626,SB-626 welded tubing,B619,SB-629 welded pipe,B366,SB-366 buttweld fitting,ASTM B582,ASME SB-582 plates,sheets,strips,B564,SB-564,B572,SB-472,SB462 bar forging, DIN No.2.4880
We export Nickel-Chromium-Iron-Molybdenum-Copper Alloy UNS N06007 nickel alloy,specialty alloy seamless pipes,tubes,welded piping,elbows,tees,u-tube,reducers,butt weld fittings,flanges ASTM B622,ASME SB622 nickel base alloy seamless tubing,pipe,B626,SB-626 welded tubing,B619,SB-629 welded pipe,B366,SB-366 buttweld fitting,ASTM B582,ASME SB-582 plates,sheets,strips,B564,SB-564,B572,SB-472,SB462 bar forging, DIN No.2.4880
We sell Nickel-Chromium-Iron-Molybdenum-Copper Alloy UNS N06030,Hastelloy G-30 bars,slabs,and form as seamless pipes,tubes,plates,sheets,fittings N06030,Hastelloy G-30 ASTM B622,ASME SB622 nickel base alloy seamless tubing,pipe,B626,SB-626 welded tubing,B619,SB-629 welded pipe,B366,SB-366 buttweld fitting,ASTM B582,ASME SB-582 plates,sheets,strips, SB-581, SB-462, SB-472 bar forging
We supply UNS N06255 forged,forging steel round bars,slabs and forming raw materials into shape of pipe,tube,plates,sheet, Flanges & Other kinds of forgings products. Nickel-Chromium-Iron-Molybdenum-Copper alloy UNS N06255 ASME SB622,ASTM B622,nickel alloy,nickel based alloy,seamless,weld,welded,pipes,tubes,fittings,forgings,bars,billets,slabs,plates,sheets
Export high quality of hastelloy G-3,alloy G3,ASTM/ASME B/SB622 UNS N06985 seamless pipes,tubes,SB-626 welded tubing,pipe,SB-366 buttweld fitting,SB-582 plate,sheet,strip,SB-581 bar forgings hastelloy G-3,alloy G3,ASTM/ASME B/SB622 UNS N06985 seamless pipes,tubes,SB-626 welded tubing,pipe,SB-366 buttweld fitting,SB-582 plate,sheet,strip,SB-581 bar forgings
We are one of qualified in smelting nickel alloy,nickel base alloy,super duplex specialty alloy materials-slabs,billets,bars manufacturer,forming materials into shape of seamless,welded pipes and tubes,plates,sheets,forgings,fittings. Inconel alloy N06025,alloy 602,W.Nr./EN 2.4633 is one of our alloys Inconel alloy N06025,alloy 602,W.Nr./EN 2.4633 B167,SB-167,B163,SB-163 nickel base alloy seamless tubing,pipe,B366,SB-366 buttweld fitting,ASTM B168,ASME SB-168 plates,sheets,strips, bar forging,flanges B166,SB-166, B462,SB-462
We are one of qualified in smelting nickel alloy,nickel base alloy,super duplex specialty alloy materials-slabs,billets,bars manufacturer,forming materials into shape of seamless,welded pipes and tubes,plates,sheets,forgings,fittings. Inconel alloy N06025,alloy 602,W.Nr./EN 2.4633 is one of our alloys Inconel alloy N06025,alloy 602,W.Nr./EN 2.4633 B167,SB-167,B163,SB-163 nickel base alloy seamless tubing,pipe,B366,SB-366 buttweld fitting,ASTM B168,ASME SB-168 plates,sheets,strips, bar forging,flanges B166,SB-166, B462,SB-462
