Sae100r1at/1sn sae100r2at/2sn en856 4sp/4sh R5, r12, r13.R16, r7 and r8 standards and so on
All types of flanges.
All kinds of standard of flanges. Wood box or pallet.
Horizontal single movement aluminum extrusion press Model: horizontal, four tie rods, hydraulic system, plc for electric power, semi-automatic control, easily operated, automatic holding die slide and automatic charging into container. Features: this extrusion press is equipped with variable piston pump which can automatically control the output of pump according to the change of pressure. Electric power consumption is low and oil temperature does not easily rise up. Speed control is also available. Thus, it can have best operating efficiency.
1.High Pressure Resistance Max. working pressure: 14 kg/cm2 Static Test pressure: 21 kg/cm2 Burst pressure: 96 kg/cm2 2. -Approved Meets insurance requirement. 3. Particulates & Contaminants All stainless steel construction is 100% leakage tested before delivery 4.Simple Installation Take a quarter of the time required for installing conventional system. Faster clean room certification and running. 5. Relocation No downtime while sprinklers head are being moved to accommodate tool or floor-plane configuration . 6. Flexibility.
Wire Braid Hydraulic Hose: SAE 100 R1AT/DIN EN 853 1SN STANDARD Tube : Oil resistant synthetic rubber Reinforcement : one high tensile steel wire braid Cover : Abrasion and weather resistant synthetic rubber Temperature range : -40 ℃ to +100 ℃.
Flanges.
Brass fitting In carton
Description: 1.Forged brass can be DZR or CuZn40Pb2 2.Used for potable water system with copper, pex or cpvc pipe to deliver both cold and hot water 3.Push connect, install in second 4.Re-usable and removable 5.Full flow Features: 1.Maximum working pressure: 16 bar at 25íµ 2.Maximum working temperature: 95íµ at 8 bar 3.Available in 15mm, 22mm, 28mm 4.Referred standards: EN 1254-6 (draft).
Description: 1.Forged brass can be DZR or CuZn40Pb2 2.Used for potable water system with copper, pex or cpvc pipe to deliver both cold and hot water 3.Push connect, install in second 4.Re-usable and removable 5.Full flow Features: 1.Maximum working pressure: 16 bar at 25íµ 2.Maximum working temperature: 95íµ at 8 bar 3.Available in 15mm, 22mm, 28mm 4.Referred standards: EN 1254-6 (draft).
Description: 1.Forged brass can be DZR or CuZn40Pb2 2.Used for potable water system with copper, pex or cpvc pipe to deliver both cold and hot water 3.Push connect, install in second 4.Re-usable and removable 5.Full flow Features: 1.Maximum working pressure: 16 bar at 25íµ 2.Maximum working temperature: 95íµ at 8 bar 3.Available in 15mm, 22mm, 28mm 4.Referred standards: EN 1254-6 (draft).
Description: 1.Forged brass can be DZR or CuZn40Pb2 2.Used for potable water system with copper, pex or cpvc pipe to deliver both cold and hot water 3.Push connect, install in second 4.Re-usable and removable 5.Full flow Features: 1.Maximum working pressure: 16 bar at 25íµ 2.Maximum working temperature: 95íµ at 8 bar 3.Available in 15mm, 22mm, 28mm 4.Referred standards: EN 1254-6 (draft).
Description: 1.Forged brass can be DZR or CuZn40Pb2 2.Used for potable water system with copper, pex or cpvc pipe to deliver both cold and hot water 3.Push connect, install in second 4.Re-usable and removable 5.Full flow Features: 1.Maximum working pressure: 16 bar at 25íµ 2.Maximum working temperature: 95íµ at 8 bar 3.Available in 15mm, 22mm, 28mm 4.Referred standards: EN 1254-6 (draft).
Standard: Asme : ansi b16.9, ansi b16.28, mss-sp-75 Din:din2605, din2615, din2616, din2617, din28011 SGP: jisb2313 En:en10253-1 en10253-2
Brass fitting is produced according to astm standard or en standard. Suitable for all substances which are suitable for copper, including seawater, cold water , hot water , drinking water and steam , oil , gas , medical fas etc. Which are no more than150 in temperature. N/a
Plastic fitting is the most widely used piping material. Plastic fitting systems are: Environmentally sound. Provide long service life. Easy to install and handle. Corrosion resistant. Cost effective. Widely accepted by codes. The plastic fittings we produced are: ppr fitting, pvc fitting, pe fitting, pex fitting, ect. N/a
Pe hose with the material of pe Types: straight, spiral, coil Specification: 4x2.5, 5x3, 6x4, 8x5, 16x12, and so on , also can according to your request Length: according to your request, generally 100or200m/disk Excellent flexibility, good high pressure-resistant property, good vibration-resistant property, highly elastic.Operating temperature range is wide. The diameter size are of the high-precision control A variety of colors to choose:nature\orange\yellow\green\blue\black\red\transparent blue\transparent red Pe tube can be used in industry robot\pneumatic tools\air tools We have passed the syetem of quality certification of iso9002
Pu hose with the material of pu Types: straight, spiral, coil Specification: 4x2.5, 5x3, 6x4, 8x5, 16x12, and so on , also can according to your request Length, according to your request, generally 100or200m/disk Excellent flexibility, good high pressure-resistant property, good vibration-resistant property, highly elastic.Operating temperature range is wide. The diameter size are of the high-precision control A variety of colors to choose:nature\orange\yellow\green\blue\black\red\transparent blue\transparent red Pu tube can be used in industry robot\pneumatic tools\air tools We have passed the syetem of quality certification of iso9002
Hydraulic hoses.
Industrial hose
