A Large Diameter flange is a metal ring that is used to connect valves, pipes, pumps and other equipment that is necessary to form pipelines. The Large Diameter flange also allows people to have easy inspection, rapid modification, and easy and quick access to clean the pipes. The ASME/ANSI B16.47 Large Diameter Steel Flanges include NPS 26 through NPS 60. This standard covers pressure ratings, temperature ratings, materials, dimensions, tolerances, marking and testing for flanges of this size with rating class designations 150, 300, 600, 900, 1500 and 2500. The ASME/ANSI B16.47 Large Diameter Steel Flanges include NPS 26 through NPS 60. This standard covers pressure ratings, temperature ratings, materials, dimensions, tolerances, marking and testing for flanges of this size with rating class designations 150, 300, 600, 900, 1500 and 2500. The flanges are made in multiple ways. Some have lips, while others do not. Nearly every type of flange has a seal attached to it in order to preclude any type of leaks from the pipeline. Highborn creates a significant volume of large diameter flanges for the biggest jobs in the energy and industrial fields. We can create a variety of large diameter sizes and configurations, using numerous suitable materials of construction for every application.
Sliding pipe clamps. These pipe flanges slide on the pipe. They are made with an inside diameter slightly larger than the outside diameter of the pipe. These fasteners are connected to the pipe via a corner weld at the top and bottom of the flange. The weld neck flanges have a longer life than the slip-on flanges. The sliding flanges are all slightly larger than the O. D. of the pipe. They are preferred to weld neck flanges by many users because of their lower initial cost, but the final cost of installation is probably not much less than that of the weld neck flange due to the weld additional involved. Advantages of using Highborn Slip-On flanges are as follows: Low cost installation Less time needed to spent on ensuring the accuracy of the cut pipe They are somewhat easier to align The slip-on flanges have low hub because the pipe slips into the flange before welding The flange is welded both inside and outside to provide sufficient strength They prevent leakage They are preferred to weld neck flanges by many users because of their lower initial cost, but the final cost of installation is probably not much less than that of the weld neck flange due to the weld additional involved.
The lap joint flange has two components, one stub end, and loose backing flange. The end piece is welded end to end to the pipe and the support flange moves freely on the pipe. The support flange may be of different material from the stub material and normally of carbon steel to save cost. The cover flange is used when frequent disassembling is required, and space is limited. The flange of the lap joint is almost identical to a slip-on flange, except that it has a radius at the intersection of the bore and flange face. These flanges are nearly identical to a Slip On flange with the exception of a radius at the intersection of the flange face and the bore to accommodate the flanged portion of the Stub End. The lap joint flange is practically identical to a slip-on flange except it has a radius at the intersection of the bore and flange face. This radius is necessary to have the flange accommodate a lap joint stub end. Normally, a lap joint flange and a lap joint stub end are mated together is an assembly system. Sizes we make range from 1/2" to 64" (and much larger size according to customers' demands).
Ranges of SAE flanges and hydraulic flanges are manufactured in Highborn Flanges and Fittings that meet the relevant international standards. These flanges find application in industries where flanged joints are encountered during manufacturing and maintenance tasks. Our wide range of SAE flanges can also be customized according to the drawings and specifications provided by customers. These flanges are used on oil hydraulic systems in many fields (shipbuilding, mobile hydraulic equipment, machine tools, earth moving machines, etc… ) and where there is passage of oil under pressure. SAE Flanges are designed as per SAE J 518 C standards worldwide & VE-LOCK SAE Flanges can be Interchangeable. The design for the SAE System calls for Forged Flanges with Sleeves made from weldable material. In order to reduce costs, we have introduced a two piece system where the sleeve & the Flange were combined into one Piece. Such a system is easily adaptable to both Butt Weld and Socket weld Systems. However in practice, the two piece system is used mainly for Socket Weld Flanges for cost considerations.
Material Alloy steel (ASTM A234 WP12/WP11/WP22/WP5/WP9/WP91) Stainless steel (ASTM A403 WP304/WP304L/WP316/WP316L) Carbon steel (ASTM A234WPS, A234WPC, A420 WPL6), St45.8 A105 A106 STG42) Standard ASME B16.5 MSS SP44 Gost JIS etc Type WN FLANGE, SO FALNGE, LAP JOINT FALNGE, THREADED FLANGE, SOCKET FLANGE , BLIND FLANGE Pressure class 150 class 300 class 600 class 900 class 1500 PN6 PN16 PN25 PN40 PN100...... Size 1/2-80 inch (DN15-DN2000) Surface treatment Anti-rust Oil, Transparent/Yellow/Black Anti-rust Paint,Zinc, Hot dipped Galvanized. Inspection Factory in-house self check or Third Party inspection Packing Wooden case, pallet or as customers requirement Applications Petroleum,chemical,power,gas,metallurgy, shipbuilding, construction, etc Heat Treatment Normalizing, Annealing, Quenching+Tempering Payment L/C T/T
Double Color DIP 5mm Round with Flange Features �? Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free .The product itself will remain within RoHS compliant version. Technical Data Sheet This product is generally used as indicator and luminary for electronic equipment such as household appliance, communication equipment, and dashboard Visible DIP, 5mm Round with Flange, 5mm Flat with Flange For Sale Applications TV set Monitor Telephone Computer Y.LIN Is a professional supplier of full color RGB DIP, 10mm round with edge and 8mm round with edge, etc. Please tell us what you required and ask any questions on any of our products.
Turbo blade with flange It is used for brick, block, concrete, granite, marble, masonry stone etc. The turbo rim segment makes it ideal for fast, aggressive, clean cuts and chip free. Use dry or wet. Item number DiameterSegment height (mm)Segment width (mm)Arbor(mm) Tgp1054''/105mm8-101.6-2.020/22.23 Tgp1154.5''/115mm8-101.6-2.020/22.23 Tgp1255''/125mm8-101.6-2.020/22.23 Tgp1506''/150mm8-102.0-3.020/22.23 Tgp1807''/180mm8-102.0-3.020/22.23/25.4 Tgp2008''/200mm8-102.0-3.020/22.23/25.4 Tgp2309''/230mm8-1 02.0-3.020/22.23/25.4 Tgp25010''/250mm8-102.0-3.020/22.23/25.4 -
Extruded and Flat blade street name sign bracket for U-channel posts. Blade sits at 90-degrees to post flange.
Quick information, brand name:dyft, place of origin:china, size :from 1/2, pressure :sch5s-sch160, material :carbon steel and some spe, standards :asme/ansi, din, jis, using :petroleum, chemical, power, description, concrete pump pipe flange data, , , specification, 1)size: from 1/2" to 48", dn15 - dn1200, 2)pressure: sch5s-sch160, 3) material: carbon, steel and some special materials., 4)standards:asme/ansi, din, jis
Class 75,150,300,400,600,900 series flange
PVC Invisible Flange G Section for HVAC Insulation Ducting
PVC Invisible Flange U Section for HVAC Insulation Ducting
PVC Invisible Flange Chair Section for HVAC Insulation Ducting
PVC Invisible Flange F Section for HVAC Insulation Ducting
PVC 4 meter Invisible Flange joint for HVAC Insulation Ducting.
Liquid Forging/Squeeze Casting + T6 Flange Material A356.2 Properties No pores,Elongation 8%, Hardness 80HBS, Tensile strength 300 Mpa, Yield strength 260 MPa Application:Nuclear reactor
Technolloy Inc. are a certain Manufacturers, Suppliers, and Exporters of Inconel 601 flanges in Mumbai, India. These Inconel Flanges are made by opening and all around. These flanges are by and large used in various application tries like oil, substance, improvement, get-togethers, gas, shipbuilding affiliations, and some more. We offer a wide level of various types of Inconel 601 flanges, taking a gander at slip for flanges, outline weld, blind, lapped, screwed, weld neck, lessening, show, slip on boss, plate, plate clear, screwed chiefs, etc.
Product Description Double stud adapters (DSA) are commonly used to connect flanges with different nominal sizes, pressure ratings and configurations. Yulin Double Studded Adaptor is also called adaptor flange, which is designed as per API 6A and API Spec Q1. It is the flange to connect different size flange. Features It can be used to connect flanges with any combination of sizes and pressure ratings Custom DSA's are available to transition between API, ASME, MSS or other styles of flanges Supplied with standard or customer-specific thicknesses Normally provided with tap-end studs and nuts Available for general service and sour service in compliance with any temperature rating and material requirements specified in API Specification 6A Available with Stainless Steel 316L or Inconel 625 corrosion-resistant ring grooves
Sankalp Alloys Overseas is one of the prime manufacturers and suppliers of Inconel 718 Flanges. We process ASTM B564 Inconel 718 Flanges with top-class raw materials from our vast inventory. Being well-noted for producing high-quality UNS N07718 Inconel Flanges, Sankalp Alloys Overseas has created a credible position in the industry.
