Manufacturers and distribution of all types of fire fighting equipment such as hydrants, couplings, nozzles, hoses, extinguishers, sprinklers etc.for water and foam-based systems.
Code hm01-39
Model oden3
Capacity 3 kg
Cylinder dia 140mm/125mm
Cylinder volume 4.00l/3.60l
Discharge time 12s
Full weight 5.60kg
Fire rating abc40% 13a/70b/c
Working pressure 14bar at 20c
Operating temp. -30c+60c
1 heat-insulation suit it is constructed by an aluminum foil compound flame-resisting material; the raise of inner temperature of the suit is not higher than 25 degree after it is shined 30 seconds by a 10kw/m heat radiator. 1 set it consists of jacket, pants, foot cover, glove and ccs certificate 2 self-contained open-circuit compressed air breathing the air cylinder operation pressure is 30 mpa 1 set a ccs certificate and a quality certificate 3 flame-resisting life-saving line 40m 1 set a ccs certificate and a quality certificate 4 explosion-proof lamp the minimum light period of 3 hours. 1 set a ccs certificate and a quality certificate 5 axe high-voltage insulation 1 set 6 rigid helmet it can effectively protect against impact and stabbing. 1 set 7 boots of rubber slip-proof, stab-proof, and acid and alkali-resistant 1 pair 8 safety belt 1 set.
The rhzk series self-cbntained open circuit compressed air bresthing apparatus are used widely for fire-fighting, chemical industry, shipping, laboratory, mine, petroleum, warehose, factory and metallurgy.It can provide effetely respiratory protecting from toxic gases for fire-fighter, life-saver, rescue and operator who working in thick smoke, steam, and oxygen deficiency hazardous atmosphere. Product inspection standard:requirements of the international code for fire safety systems and ga124-2004.Ec type examination certificate no.54 775 - 08 lux. Type working pressure(mpa) volume (l) tolerance of storing (l) working time (min) warning pressure (mpa) weight (kg) dimension (mm) rhzk 5/30 30 5 1500 40-50 4-6 ++n12 755*460*290 rhzk 6/30 30 6 1800 50-60 4-6 ++n14 755*460*290 rhzk 6.8/30 30 6.8 2040 50-60 4.
Gfm8-2 powder filler is a new product developed and designed by our factory in combination with the characteristic of actual filling with reference to the advantages of its counterparts at home and abroad. Powder is rapidly absorbed into the cylinder to be filled by vacuum jet current. It is equipped with t3806 weight display of high precision and mp-t printer. The filling is automatic and quantitative. The residual dust on the filter is cleared by use of the negative pressure produced by vacuum. As it integrates electronics, electrical device and machinery into one entity, labor intensity is lowered and work environment improved. It is characterized by small volume, light weight, lower energy consumption, easy movement, simple operation and longer service life. So it is specially suitable for powder filling of fire extinguisher and also ideal for other powder filling sector.
Main technical parameters
Volume: length *width *height (1130mm*520mm*1350mm)
Weight: 200kg
Voltage: ac 380v/220v 50hz
Power: 0.55kw
Filling precision: 1kg<+0.015
Filling speed: 6-12kg/min
The nonwoven filter media is made up of layers with different fibre fabric and having the high filtration efficiency, The fibre fabric gradually trend to thin and dense from Layer of gas entrance to the Layer of gas exit. The filter function was completed by filter effect of different fibre layer and fibre surface. it has the excellent air permeability and good strength after special process. The water resistance and dust storage is 3-5 times thanfilter paper .It widely use in automotive filter and other air filter.
Special Characteristic:
1).Initial efficiency í¦97.5% ; Final efficiency í¦99.8%
2).Excellent air permeability and enough micromesh with good dust-saving ability.
3).Easy taking shape and eximious strength capability
Chuck gauge; 10cm
High-precision dry powder automatic filling product line is newly invented by our engineer according to the requirement of fire extinguisher production all over the world.
The success of this product line is awarded national invention patent, five practical patents. This product line adopts high precision sensors and plc controller system, testing or checking datas and values of speed, position, weight, force, leakage etc. This product line is constructed with screen print, solidify, fast filling, fine filling, vibration, valve screwing, gas filling, mechanical arm, leak testing, helium leak testing, label stick parts.Every part can work as a unit part and can work as a system.
This product line is efficient and only need 2-3 worker, has been exported to hungary, uae, middle east, dubai and other countries. Main technical parameters of product
1.Productivity: 4kg fire extinguisher 220pc/hour
2. Conveying linear velocity 6 m/min
3. Filling speed 30kg/min
4. Accuracy of filled amount <0.7%
5. Air driving pressure 0.4-0.8mpa
6. Power supply wiring ac380v/220v/50hz
GFM8-2 Automatic type fire extinguisher powder filler is equipped with T3806 weight display of high precision and MP-T printer. The filling is automatic and quantitative. The residual dust on the filter is cleared by use of the negative pressure produced by vacuum. As it integrates electronics, electrical device and machinery into one entity, labor intensity is lowered and work environment improved. It is characterized by small volume, light weight, lower energy consumption, easy movement, simple operation and longer service life.
Main technical parameters
Volume: Length í-Width í-Height (1130mmí-520mmí-1350mm)
Weight: 200kg
Voltage: AC 380v/220v 50Hz
Power: 0.55KW/1.5KW
Filling precision: 1kgí_+0.02
Filling speed: 6-12kg/min.
Model GFM16-1 dry powder filler can quickly suck dry powder into the cylinder and be directly filled in the container by vacuum fluidics, and it can also conduct sucking and filling simultaneously. It features small volume, easy movement, simple operation and lack of environmental pollution. Thus labor intensity is decreased and work environment is improved. It is especially suitable for the filling, production and maintenance of dry powder extinguisher and also suitable for filling various powder products. So it is an ideal equipment in the powder filling industry.
Underground fire hydrant, to bs750, dn80, type b, ductile iron, epoxy coating, london round thread outlet, resilient seated, non rising spindle, flanded end.
We are professional produce and export : fire extinguisher ,
Accessories , other fire fighting equipment
We export to Europe, Iran, Pakistan, India, Turkey, Korea etc.
If you are interested in these items, please contact us.
Attached for your reference .
250x180x500mm, for 2kg~3kg fire extinguisher
280x210x560mm, for 4kg~5kg fire extinguisher
280x230x700mm, for 6kg fire extinguisher
280x230x760mm, for 9kg fire extinguisher
280x260x860mm, for 12kg fire extinguisher
Gfm 8-2 powder filler is a new product developed and designed by our factory in combination with the characteristic of actual filling with reference to the advantages of its counterparts at home and abroad. Powder is rapidly absorbed into the cylinder to be filled by vacuum jet current. It is equipped with t3806 weight display of high precision and mp-t printer. The filling is automatic and quantitative. The residual dust on the filter is cleared by use of the negative pressure produced by vacuum. As it integrates electronics, electrical device and machinery into one entity, labor intensity is lowered and work environment improved. It is characterized by small volume, light weight, lower energy consumption, easy movement, simple operation and longer service life. So it is specially suitable for powder filling of fire extinguisher and also ideal for other powder filling sector.
This product is manufactured through coarse smash, micron smash, physics and chemistry purification and complex coating process. We can provide 325 meshes to 5, 000 meshes of different products. This flame retardant provides an excellent performance on both flame retarding and smoke restraining after compounding. It is widely used in plastic, rubber and cable industries.
Break strength (in longitudinal or latitudinal direction) 850n
Tear strength 100n
Durable temperature:long-term use 260, short-term use 400
Limiting oxygen index: 30
High temperature endurable and fire resistant cloth with pre-oxidized thread:
Break strength 600n
Tear strength 30n
Durable temperaturelong-term use 600, short-term use 1000
Limiting oxygen index 30
When you squirt the fire stop liquid unto any surface of any item, they become fire resistant
It is great for household protection, and great against forest fires.
Comes in 5 liter plastic containers. ( 5 liter sells for 40 euros ) plus shipping charges.
1580 Fire Extinguishers Products Suppliers
Short on time? Let Fire Extinguishers Products sellers contact you.
