Find Verified Paper Chemicals Suppliers, Manufacturers and Wholesalers

40-500 gsm

100-200 cms

FOR PRODUCT DETAILS WE CAN SEND ONLY SERIOUS BUYER.

Certificate of quality
Fineness % +-10.0
Initial setting time h:min +-0:45
Final setting time h:min +-10:00
Soundness Mum +-5.0
So3 % +-3.5
Mgo % +-5.0
Loss on ignition % +-5.0
Bending strength mpa +-6.5
Compressive strength mpa +-42.5



1ton/big bag

Common Gypsum Plasterboard
Technical parameters Standards(GB/T9775-1999)

Common Gypsum Plasterboard-specifications
dimension(mm)
depth: 9.5, 12, 15,
width:1200, 1200, 1200,
legnth:3000, 3000, 3000,
weight(kg/m2):7.2,9.0,11.5,
Simple packing specification
No.s: 100,80,60,
area(m2):360,288,216,
weight(ton):2.67,2.69,2.61,
Standard of loading
No.s:76,60,50,
area(m2):273.6,216,180,
weight(ton):2.1,2.1.2.28

Fireproof Plasterboard technical parameters

Standards(GB/T9775-1999)

FireProof Gypsum Plasterboard-specifications
Dimension(mm)
depth: 9.5, 12, 15,
width:1200, 1200, 1200,
legnth:3000, 3000, 3000,
weight(kg/m2):8.2,9.6,12.4,
Simple packing specification
No.s: 100,80,60,
area(m2):360,288,216,
weight(ton):3.04,2.87,2.81,
Standard of loading
No.s:76,60,50,
area(m2):273.6,216,180,
weight(ton):2.39,2.25.2.46

Waterproof Plasterboard technical parameters

Standards (GB/T9775-1999)

Water Proof Gypsum Plasterboard-specifications
Dimension(mm)
depth: 9.5, 12, 15,
width:1200, 1200, 1200,
legnth:3000, 3000, 3000,
weight(kg/m2):8.3,9.7,12.6,
Simple packing specification
No.s: 100,80,60,
area(m2):360,288,216,
weight(ton):3.08,2.90,2.86,
Standard of loading
No.s:76,60,50,
area(m2):273.6,216,180,
weight(ton):2.42,2.27.2.50

GB Standard

U profile horizontal stud
Dimension(mm)
depth: 0.7, 0.7, 0.7,
width:100, 75, 50,
Wingwidth:404040
legnth:3000, 3000, 3000,
Simple packing specification
weight(kg/m):0.9670.8350.698

GB standard&ISO

C profile vertical stud
Dimension(mm)
depth: 0.7, 0.7, 0.7,
width:98.5, 73.5, 48.5,
Wingwidth:505050
legnth:3000, 3000, 3000,
Simple packing specification
weight(kg/m):1.1981.0720.934

Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in colour from dark grey, bright yellow, or deep purple to rusty red. The iron itself is usually found in the form of magnetite, hematite, goethite, limonite or siderite. The primary use of iron ore is in the production of iron. Most of the iron produced is then used to make steel. Steel is used to make automobiles, locomotives, ships, beams used in buildings, furniture, paper clips, tools, reinforcing rods for concrete, bicycles, and thousands of other item

Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in colour from dark grey, bright yellow, or deep purple to rusty red. The iron itself is usually found in the form of magnetite, hematite, goethite, limonite or siderite.

The primary use of iron ore is in the production of iron. Most of the iron produced is then used to make� steel.� Steel� is used to make automobiles, locomotives, ships, beams used in buildings, furniture, paper clips, tools, reinforcing rods for� concrete, bicycles, and thousands of other items.

The equipment is designed and manufactured by Gough & Co Ldt, UK in year 1999 / installed in 2000, manufacturer’s type single deck Vibracon GVF4. We have totally 3 identical units which were dismantled in 2007 and all of them are in very good operational condition. These are single deck circular screen design for high velocity scalping, de-watering or single deck separation in chemical and pharmaceutical industry. (These units were screening oversized particles in PVC - granulate factory truck loading station) The perforated screen and all product touching parts are made on stainless steel AISI 304L. Top deck houses the screen and the discharge spout for oversize particle removal is fitted to it. Top deck is supported with mechanical spring and vibration movement is created by two contra rotating vibrating motors on the outside of the unit so there are no internal working parts. Vibration power can be adjusted.

Technical data:
Type: Vibracon GVF 4
Material: AISI 304L – product touching parts
Perforated screen: Mesh size 4 mm
Screen diameter: 1100 mm
Screen area: 9500 cm2
Vibrators: 2 x 0.52 kW units.

e equipment was manufactured by Jeffrey Rader AB, Sweden in 1995 and it is in very good operational condition. It consist of two heavy duty rolls with removable profilied surfaces which rotate towards each other and presses overzised wood chips between the profiles. Roll drives 2 x 110 kW / 1500 rpm connected with two gearboxes. Hydraulic pump 7.5 kW, capacity 220 m3/h wood chips.

The equipment was manufactured by Jeffrey Rader Inc, Sweden in year 1995, manufacturers type is DynaYield 80-300 and it is in good operational condition. The Chip Conditioner consists of two heavy duty rolls with removable profiled surfaces. They rotate towards each other and pull the oversize chips between them. The profiled surfaces are aligned so that the pyramid apexes on one roll travel in the valleys of the apexes on the adjacent roll. With normal oversize wood, the Conditioner typically generates less than 1% fines and 3% pins
The normal application for the Chip Conditioner is in a chemical pulping process, processing the oversize materials by fissuring the wood chips parallel with the grain to allow the cooking liquors to penetrate the chip, and allow the oversize chip to cook as an acceptable size chip. Another application is in a thermo-mechanical pulping process (TMP), as a preconditioning
An important feature of this machine is its ability to handle small portions of tramp without going off-line. With the so called Dynagage Conditioner, the dynamic roll is allowed to move away from the static roll, and once the tramp is through the unit, the roll automatically moves back to the proper set point without shutting down the flow and together with slow rotation speed enable were low down time and maintenance costs. Roll distance movements are made with a hydraulic system build on the equipment and controlled by 3 position sensors
More information on requests, for spam protection please introduce yourself properly.

Technical data:
Model: RDY 80-300
Manufacturing year: 1995
Capacity (throughput): 220 m3/h loose wood chips
Press roll diameter: 915 mm
Roll length: 2440 mm
Roll motors: 2 x 110 kW / 1500 rpm / 690 V – 50Hz
Press distance between the rolls: 2.2 mm
Gearboxes: 2 x Kipo Benzler TV 512
Hydraulic pump: Rexroth 200 bar with Mecman syliders
Electric motor for hydraulic pump: ASEA 7.5 kW
Weight: 33 000 kg
Length: 5083 mm
Width: 2550 mm
Height: 2400 mm.