Find Verified Fitness Equipment Sports Goods Suppliers, Manufacturers and Wholesalers

Prouct : we could supply Titanium Ore
Production : 100-150 mt/ week
Grade : 45% TiO2 with Al2O3 with good percentage with Fe
packing : 1mt big bags or 50 kg bags at selle'sr account
Size : < 1mm
Production in Zambia.

Please advise interest.

Metores Ltd.
Br. Mikael Keinonen

The equipment is designed and manufactured by Gough & Co Ldt, UK in year 1999 / installed in 2000, manufacturer’s type single deck Vibracon GVF4. We have totally 3 identical units which were dismantled in 2007 and all of them are in very good operational condition. These are single deck circular screen design for high velocity scalping, de-watering or single deck separation in chemical and pharmaceutical industry. (These units were screening oversized particles in PVC - granulate factory truck loading station) The perforated screen and all product touching parts are made on stainless steel AISI 304L. Top deck houses the screen and the discharge spout for oversize particle removal is fitted to it. Top deck is supported with mechanical spring and vibration movement is created by two contra rotating vibrating motors on the outside of the unit so there are no internal working parts. Vibration power can be adjusted.

Technical data:
Type: Vibracon GVF 4
Material: AISI 304L – product touching parts
Perforated screen: Mesh size 4 mm
Screen diameter: 1100 mm
Screen area: 9500 cm2
Vibrators: 2 x 0.52 kW units.

The vacuum evaporator is made by Italian Ecoteck in year 2003 and operation was stopped in early 2009 and it is in very good operational condition. This unit is made for concentrate acidic liquid wastes and therefore all liquid touching parts are made of acid proof steel ( SS 2353) or PVC. The evaporation capacity of the unit is 5000 liters / day. The unit is a complete working unit and it includes evaporator, boiler, heat pump, centrifugal pump, water-air cooler, steam ejector, control unit and all other necessary equipment to complete the unit.

Operation principle:
Steam rises from the boiler through a drop dispenser to the cooling unit where it condensates. The condensate drops with the gravity down to vacuum system. In-build heat pump heats up the cooling media and simultaneously cools down the condensate. Water – air cooler cools down the extra heat from the process. Necessary vacuum is generated with a centrifugal pump and a steam ejector. Condensate rejection takes place in accordance with prescheduled frequency.

Technical data:
Manufacturer: ECOTECH Srl Italy / Vilokan Ren Miljöteknik Sweden
Type: ECO 5000 VS-HP, R407C
Year made: 2003
Evaporation capacity: 5000 liters / 24 hour (pure water)
Electricity consump.: about 0,15 kWh / liter pure wateri)
Control unit: Siemens Micromaster 420
Compressor: Bitzer Kuhlmachinenbau GmbH,
Compressor type: 6G-40,2
Compressor capacity: 126.8 m3/h, 19/28 bar
Refrigenerant: R 407 C
Main dimensions: 2.8 m x 1.3 m x 2.9 m
Weight: 1500 kg.

The main description of the plant equipmet is:

1. Brew House Make & Capacity:
Steinecker1995 -1999
5 brews/d, 450-500 hl/brew. for 7000 kg malt, 3850 Raw grain
Cast-out quantity: 500 hl, 16,5° Plato
8 Brews/ 24 hours, annual capacity 0.85 Mhl
Controls are based on Siemens S5 and S7 PCS with, Botec Control system, PC Windows 2000 (Steinecker)
Laboratory yield = 97.1% (2.1.09 – 28.5.09, 837 brews)

The Brewhouse was installed in 1996 - 1999 by Steinecker to a high standard of control and automation and it contains the following main equipment:

Wet Conditioning Mill, capacity 20 tons/hour and it is fully overhauled 2008

Configuration, main characteristics:
1 wet mill plant: 20 t/h
1 mash tun kettle plant: V=550 hl
1 lauter tun plant: D=7200mm
1 weak wort tank: V=155 hl
1 pre run vessel: V=640 hl
1 CIP- water distributor
brew/whirpool kettle hot wort max. 520 hl (1 brew / 5 hours)
wort cooling 400 hl/h, 10°C

- Mash Kettle, a jacketed vessel 550 hl
- Enzyme Dosing pot and pump
- Lauter Tun complete with spent grain tank and Pondorff pneumatic grains transfer. Tun capacity 814 Hl and diameter 7200 mm, Solids capacity of 7000 kg malt and 3850 kg raw grain. Complete with internal rakes and scrapers
- Pre Run Vessel complete with internal heater , volume 640 hl
- Wort Boiler/ Whirlpool, gross volume 757 hl net 520 hl
- Wort Cooler with aeration – GEA supplied plate heat exchanger (YOM 1990) – rated at 450 Hl/hr cooling the wort from 95oC down to less than 10oC. Cooling achieved with brewing water and then chilled water. Aeration achieved by use of a sintered disc and static mixers, and controlled manually using mass flow meters
- 2 Hop Pellet Tanks
- 2 Hop Oil Tanks
- Brewhouse Weak Wort Tank, volume 150 hl
- Alfa-Laval Decanter, year 2008, capacity 100 hl / h
- 2 Weak Wort Tanks, volume approx 80 hl each
- Gypsum Tank, volume approx 40 hl
- Wet starch tank – volume 100 hl
- Spent Grains Silo
- Spent Grains Drying System
- Bulk Acid tank – plastic tank with integral bund and dosing pumps

ating line is delivered by Finnish Elmont Oy and it consist of 59 separate dipping tanks, 6 material handling cranes and related process and automation equipment. We have the dipping tanks and material handling cranes in our store for sale. Dipping tank materials are AISI 316, SS, PP, HST and PP. All tanks are 2200 mm long and 1250 mm height, widths varies from 450 to 1740 mm, volumes from 1213 to 4016 liters. All tanks are in good condition.

The cranes are designed for those tanks and we have 6 pcs of them. Cranes have 0.25 kW gear motors and control panels. Structure is made of steel and they are in good condition.

If you are looking for such equipment, please contact us and we are pleased to give you more deep information.

Good condition GEA Westfalia centrifugal separator used for molasses removal from fermented beer. The equipment has patented HydroStop solid discharged system that can be adjusted precisely and reproducibly to the specific solids concentration requirements of the process. This beer separator has continuous and self cleaning separation process and in beer filtration application this separator eliminates the need to use kieselghur.

Technical information:

Manufacturer: - GEA Westfalia Germany
Year of manufacturing: - 2002
Manufacturer's type: - SC 30-06-177
Capacity: - 4000 - 6000 liters / hour
Electric drive: - 18.5 kW
Bowl diameter: - 440 mm
Bowl speed: - 7270 rpm
Relative density of solids removed: min 1.4 kg/l
Relative density of suspension: max 1.2 kg/l
Particle size or removed solids: > 4.6 micron
Centrifugable solids: - max 5% v/v
Viscosity of free liquid: - 2.5 - 5.5

Very little operated (ony 6000 hours totally!) fuel oil fired package boiler made by Högfors (nowadays Foster Wheeler) in 1988. Complete plant with combustion air fan and feed water pumps for immediate delivery, in very good condition.

Main scope of the delivery:
- Högfors 30 t/h boiler
- Oilon burner
- Economizer
- Combustion air fan
- 2 pcs of 90 kW / 25 bar KSB feed water pumps
- Fuel oil pumping unit made by Oilon
- 8 pcs of steam shoot blowers
- valves, fittings and maintenance supports .

Type of boiler Water tube type with natural circulation, with two drums
Manufacturer Kymin Osakeyhtiö, Högfors, Finland (Foster Wheeler)
Model of the boiler: H52-47-25 bar
Year of manufacturing 1980
Starting day of operation 16.11.1980
Evaporation 47 t/h saturated steam
Temperature of steam 226 oC
Effect 30 MW
Structural pressure 25 bar
Feed water temperature 120 oC

Furnace volume 74,5 m3
Surface of furnace c. 136 m2
Surface of convection part 420 m2
Surface of economizer c. 504 m2
Water volume 15,8 m3

Oil Heavy oil (POR 230)
Oil burner Saacke SKV, fully automatic, modulating
Regulating area of burner 610-3050 kg/h
Oil pumping- and pre- Oilon Osva 4000 kg/h
heating station
Feed water pumps 2 pcs + 1 pc as spare.
KSB-centrifugal pump MOVI 65/6,
massflow 59 t/h, 29,5 bar
motor 90 kW, 2900 r/min
Primary air fan Mercantile KDER 75, 37300 Nm3/h, motor 115 kW, 1500 r/min
Sootblowers Diamond Superior sootblowers 4 pcs in boiler part
Diamond Superior sootblowers 4 pcs in economizer.

Dimensions of boiler part: Height 5,2 m, Width c. 4,5 m, Length 10,0 m
Weight of boiler part c. 54 t. without water and accessories
Weight of economizer c. 15 t. without water and accessories
Boiler is suitable for gas operation by changing the burner.
The boiler has been in operation only about 6.000 hours.
Equipment for SaleGeneral Industry Textile Machinery Process Equipment Energy & Power
Gas & HFO Boilers Wind Turbines.

The line is designed to fill beer in to three different type of 0,33 litre glass bottles, label the bottles neck around and lower body small around and pack the bottles in to 4 x 6 bottle cartoon boxes. This bottling line capacity is 20000 bph. Clean glass bottles were brought on wooden pallets to depalletizer which feed them to the filling lines. Innofill DMG bottle filling machine and Handtmann MMS filtration system are located in a clean air room. KHS lamella conveyor system for bottle transport and cartoon boxes. The equipment were totally delivered by German KHS in year 2003, most of machines manufactured in year 2002. All control units are Siemens Simatic S7 model with remote connection. The line was shut down in year 2008 and it is still installed and in very good operational condition.

Main equipment are:
- Bottle Depalletizer KHS AL, semiautomatic
- Micro Filtration Handtmann MMS 130
- Filling Equipment KHS Innofill DMG (rinsing, filling and capping)
- Labelling Machine KHS Innoket 2060
- Cartoon Box Forming Machine KHS Innopak CA-1
- Bottle Packing Robot KHS Innopak SP 1200
- Box Marking System
- Case Sealer KHS Innopak CV.

Good condition filtration press made ny German MSE Filterpress GmbH in year 1997. The press has 33 plates of size 630 x 630 mm, cace thickness 25 mm. Includes own hydraulic system and control cabinet.

The equipment is manufactured by German MSE Filterpress GmbH, year 1997. Manufacturer’s type KFP 630-40-25K-MPN+DLMP. Structure is made on normal construction steel, plate size is 630 x 630 mm. The filter plates are pressed with single acting hydraulic cylinder with inbuilt hydraulic pump-motor. Product is fed in a central sludge feed inlet with flange connection and each pressing unit has its own outlet for the liquid filtrate which is them collected in one outlet channel. The cake will be disposed under the press. The unit has its own control panel attached to the equipment.

Technical data:
Manufacturer: MSE Filtterpress GmbH
Year of manufacture: 1997
Manufacturers type: KFP 630-40-25K-MPN+DLMP
Plate size: 630 x 630 mm
Number of plates: 33
Cake thickness: 25 mm
Hydraulic pressure: 380 bar max
Filtration pressure: 15 bar.

Kisters Wrap Around Packer 310
Kisters fully automated wrap around packer model 310 is a single-lane, high-performance packing robot for producing wrap-around and tray packs from stable individual products. It can handle tins, cans, jars, glass and PET bottles, as well as pre-packed products from the beverage, hygiene and food processing industry with high packaging speeds.
It can process flat corrugated cardboard and full carton blanks in different qualities. In each case, the carton is folded tightly around the product groups and subsequently glued with hotmelt and it has a large and easily accessible cardboard blank magazine. Optimum packaging results are achieved in conjunction with the precise cardboard blank guides and the exact folding process.
Wrapping robot can handle a wide range of formats. The unit is PLC-controlled and it can be easily adjusted for other packing formats. This machine has been packing beer tins (12/24 x 0.3 liters and 12 / 24 x 0.5 liters) into cartoon wrap-around packs at speed of 60 packs / min. This unit was in full operation till beginning of November 2010 and is now dismantled and stored.
Technical Data
Manufacturer: Kisters Machinenbau GmbH (Nowadays KHS )
Model: Wrap Around Packer 310 / 100
Year of manufacture: 1994
Serial number: 941782
Capacity: upto 60 cycle / min
Electricity: 16 kVA, 400 V / 50 Hz

This laminating tunnel / convection oven is made by Swedish TRIAB / Tri Innovations AB in year 2006. The oven is designed for industrial use and in build up in two separable laminating sections, both equipped with one 40.5 kW hot air sections, one product and one return conveyors and common control unit. All product touching parts are made either of stainless steel (structures and panels) or Teflon made net belts. Convection belt (600 mm wide) is located inside of the oven tunnel and has grid type surface, the return conveyor is installed on the tunnel and it has tight waived Teflon belt. The control cabinet is attached to the equipment structures. The speed of laminating conveyor is adjusted with an inverter driven motor. The speed of return conveyor can be fine tuned via a potentiometer. The equipment is featured with a remote control possibility. This has been operating with hygienic products (material foam / polyurethane film, thickness 5 mm, max. width 450 mm and production speed 6 m/min) and is in excellent operational condition with total 3450 operating hours only and it comes with original operation manual in English language.

Technical data:
Made by: TRIAD / Air Innovations AB
Manufacturing year: 2006
Total operating hours: 3450
Convection capacity: 2 x 40.5 kW
Process control PLC: Eurotherm 2216e
Hot air circulation volume: 2 x 9000 m3/h
Fan electric power: 2 x 2.2 kW
Temperature range: 50 – 150 C
Total machine length: 10 000 mm
Total machine width: 1600 mm
Convection belt material: Teflon covered metal net
Convection belt length: 9 000 x 600 mm
Convection belt speed: 3 – 8 m/s / 0.25 kW, inverted controlled
Heated width: 650 mm
Inside / free height: 80 mm (from belt to nozzles)
Return conveyor: Habasit FAB-8EO WV
Return conveyor dimensions: 12000 x 600 mm (Teflon)
Return conveyor drive: 0.25 kW, 380 V/50 Hz.

The recovery plant is specially designed to recover CO2 from fermentation processes at breweries. This complete CO2 plant was installed in 2001 and it has nominal CO2 removal capacity of 1000 kg/h. The plant has Siemens S 7 control system where operation is carried our via a large 12 " color screen panel with Windows CE operating system. This is a complete CO2 recovery plant and final delivery scope depends on buyers needs. The plant has been in operation only approx 5 years and is still installed and in very good condition. The carbon dioxide plants was designed by Danish Union Engineering (www.union.dk ) and the delivery includes following main components:

- 1 Scrubber for gas flushing
- 2 Foam catcher vessels
- CO2 collection, inflammable
- 2 Mehrer TZW 70 CO2 compressors
- 2 Carbon filters
- 2 Dehydrators
- CO2 Liquefier
- CO2 Storage Tank
- 2 Cooling compressors GEA Grasso GD-3 for R717
- Air cooled condenser for NH2 compressors
- Alarm center for CO2 and NH3 concentration
- Station for 40 kg CO2 still tank filling
- CO2 pumping station from a truck to the factory
- CO2 purification tester
- Steam heated evaporator for liquid CO2

Detailed technical information available for serious buyers

Manufacturer pompetravaini italy, made in year 2002. Vacuum pump is two staged rotating pump with externally located, grease lubricated bearings. Pump is liquid ring type designed for water sealed operation. The impeller and shaft are made of stainless steel (aisi 316), cast iron casing and manifold normal steel. The shaft is sealed with double mechanical seal. Pump is provided with connections for service water and draining. Pump includes also anticavitation valve. Pump is dismantled from its base frame but the delivery includes original electric motor eex classified abb hyr 200m lb 4 30 kw, 1476 rpm, year 1995. The equipment will be supplied loose - not as a skid.

Technical data:trch 80 - 540/c2/ra
Max suction pressure:25 mbar (till 300mbar)
Max capacity:540 m3/h (min 400 m3/h)
Flanges:80 mm
Rotation speed:1500 rpm
Power requirement:30 kw at 1500 rpm
Year made:2002
Condition:fully operational

Compressors units (totally 4 pcs) are built by York Sabroe in 2002 and 2003 and they operate with R22 refrigerant. Two identical SAB 128 HF screw compressor units are built on a common base frame with an integrated horizontally mounted oil separators, oil circulation pumps and local operating panels. Common (for two compressors) plate type Freon / Glycol evaporator, internal glycol circulating pump and one large Freon buffer tank is also build on the same base frame. Delivery includes also evaporative condenser and LV / Control cabinet and external glycol circulating pump.

Above described 2 x SAB 128 HF packages we have two for sale, one made in year 2002 and the other year 2003. Both packages are still installed and can be tested in mutually agreed time. Units have been in operation approx 6 years and 5 years and they are in very good condition.

Technical data
Number of compressors - 4 pcs
Compressor type - SAB 128 HF
Refrigerant - R 22
Cooling capacity - 4 x 379 kW ( 0 /+40C)
Swept volume - 4 x 454 m3/h
Electric drives (compressor) 4 x 110 kW - 400/690 V 50Hz (also suitable for 60Hz)
Freon buffer tank -2 x 1650 liters
Plate evaporators - Alfa-Laval M10-BW FGR
Evaporative condensers - 2 x BAC VXC 116 Closed Circuit
Condenser fans - 1 x 17 kW and 1 x 4 kW for each
Condenser circulating pumps- 2 x Grundfors LP80 - 25/133
Glycol pumps - 2 x Grundfors LP 80 - 25/133
2 x Hilge Mahana 65-160

Rotary Lube Blower / Vacuum compressor KAESER EB 420 C û 38 m3/min, 53 kPa

There are two identical sets of oil-free, 2 lobe rotary blowers, made by Germand Kaeser Kompressoren GmbH in year 2005 with accessories. Manufactures type is Kaeser ED 420 Compact Omega Pluss 53 and accessories include a control cabinet with two inverters and programmable Kaeser Start Control STC 30 unit, totally 6 preliminary intake air filters and 3 final air intake filters with their steel supports. The rotary blower units have removable sound enclose for noise insulation. Operation of the equipment was stopped in year 2007, total running hours approx 7000 and therefore they are in excellent operational condition. In addition, we can offer you service maintenance by the manufacturer at separate cost.

This equipment is suitable for demanding dust collection and pneumatic transportation of various products due to oil free operation. For pneumatic transport application some changes in filters and other parts are needed.
The rotary lobe has two blower shafts with high efficiency Omega profile in a blower block. The rotary lobe and the block have a very small distance and they are not touching each other's and therefore there is no need for lubrication oil. The rotors are driven by high efficiency electric motor via belt connection and they both are installed on the same base frame. . The inlet and discharge silencers are designed to be effective at all frequencies and are eminently suited to variable speed . Higher rotational blower speeds produce high volumetric efficiencies, which in turn lower discharge temperatures and power consumption. The Compact Range ensures that all serviceable items are accessed from the front panels of enclosures.
The preliminary intake air filters are combination of cyclone and bag filter and it removes most of the dust from inlet air. Fine filter is a combination of cyclone and 138 ceramic fine filters which removes fine dust very effectively.

Technical Data
Manufacture's type: EB 420 Compact Omega plus 53
Manufactured in year: 2005
Suction capacity with max vacuum:38,0 m3/min
Power demand max: 40,3 kW
Rotor's rotation speed 4120 rpm
Max suction vacuum: 0,53 bar (abs.)
Discharge pressure: 1,0 bar (abs.)
Max pressure increase: 470 mbar
Temperature rise max -t: 82 K
Electric motor: 45 kW û 50 Hz / 400/690V û 83/48 A
Electric motor nominal speed:2965 rpm
Protection class: IP 55
Inverters: Mitsubishi FR-F740-01160-EC
Case ventilation fan: 370 W û 50 Hz / 230 / 400V
Weight blower with the case:1120 kg
Blower case main dimensions:1.8 x 1.7 x 1.8 m (K x L x S)
Noise level: 99 dB (A)
Noise level with the case: 84 dB (A).

ELMO-G Blower - Vacuum pump 1000 m3/h

The blowers are made by German ELMO Vacuum Technology GmbH, a Siemens company in year 2002 and they are single stage, gas ring type. The vacuum pumps are in good operational condition. We have three identical pump units and originally the pumps were in dust suction operation and therefore the delivery includes 3 pcs high efficiency cyclone type dust filter with electric discharge vibrators. Motor speed is controlled with individual inverters. Units can be sold separately.

ELMO-G vacuum pumps can be used for suction operation or as compressors in pneumatic transportation system. They have side-channel principle using gas ring as a sealing and the gas flows through the compressor along a helical trajectory and is repeatedly accelerated and thereby repeatedly compressed according to the required operating point. The blowers are oil-free and thus suitable for various applications. The blowersÆ have both suction and discharge noise silencer. For pump curves, both in suction and compression, as well as additional information please contact us.

Technical Data:
Manufacturer's type:ELMO 2BH1943-1GC36
Year of manufacture:2002
Suction capacity with max vacuum:16,7 m3/min (50Hz)
Suction capacity with max discharge pressure:21,5 m3/min (50Hz)
Max pressure difference in vacuum operation:0,30 bar (50 Hz)
Max pressure difference in compression operation:0,35 bar (50 Hz)
Inverter:Danfors VTL 6000 HVAC
Blower's rotation speed2920 rpm / 50 Hz and 3520 rpm / 60 Hz
Electric motor (Siemens):50 Hz: 21.0 kW û 300/690V û 39.5 / 23.0 A
60 Hz: 24.2 kW û 460 V û 41.0 A
Protection class:IP 54.

Industrial Crane Konecranes CTX 10 t, Dual Bridge with 33.6 m span

The crane was manufactured by Konecranes Oyj in 2001 and the operation was stopped in year 2006. The equipment was regularly serviced by the manufacturer and is thus in excellent operating condition. The crane is still installed in its original place and can be tested on any time. The double bridge is welded housing construction equipped with one double speed wire hoists and a motorized rail equipment on both ends. The crane has both the local wire connected control unit as well as the wireless remote controller. On the bridge there is a service platform and the local LV û and control cabinet. All electric motors are dimensioned in accordance with Industrial Heavy Duty ED classification. The equipment includes the crane moving rail which will be sold separately.

Technical data:
Manufacturer's type:CXTD10t x 33.6m Hol: 6.1m
Lifting capacity:10 000 kg
Span distance:33.55 m
Lifting class:FEM M5 (2m)
Bridge structure:Welded case
Total weight:Approx 22 000 kg
Type of wire hoist:XL 404N40BDA4
Lifting height:6.1 m
Lifting speeds:8.0 and 1.3 m / min
Wire hoist speeds:32 and 8 m / min
Bridge speed:Inverter controlled, max 40 m / min
Wire hoist lifting motor:Double power 15 and 2.5 kW (60% ED)
Wire hoist moving motors:2 x 0.65 kW (40% ED)
Bridge moving motors:2 x 1.8 kW (40% ED)
Total power need:19.9 kW / 400 V / 50 Hz
Crane moving rail:60 x 40 cm, length 2 x 140 m.