Manufacturer pompetravaini italy, made in year 2002. Vacuum pump is two staged rotating pump with externally located, grease lubricated bearings. Pump is liquid ring type designed for water sealed operation. The impeller and shaft are made of stainless steel (aisi 316), cast iron casing and manifold normal steel. The shaft is sealed with double mechanical seal. Pump is provided with connections for service water and draining. Pump includes also anticavitation valve. Pump is dismantled from its base frame but the delivery includes original electric motor eex classified abb hyr 200m lb 4 30 kw, 1476 rpm, year 1995. The equipment will be supplied loose - not as a skid.
Technical data:trch 80 - 540/c2/ra
Max suction pressure:25 mbar (till 300mbar)
Max capacity:540 m3/h (min 400 m3/h)
Flanges:80 mm
Rotation speed:1500 rpm
Power requirement:30 kw at 1500 rpm
Year made:2002
Condition:fully operational
The recovery plant is specially designed to recover CO2 from fermentation processes at breweries. This complete CO2 plant was installed in 2001 and it has nominal CO2 removal capacity of 1000 kg/h. The plant has Siemens S 7 control system where operation is carried our via a large 12 " color screen panel with Windows CE operating system. This is a complete CO2 recovery plant and final delivery scope depends on buyers needs. The plant has been in operation only approx 5 years and is still installed and in very good condition. The carbon dioxide plants was designed by Danish Union Engineering (www.union.dk ) and the delivery includes following main components:
- 1 Scrubber for gas flushing
- 2 Foam catcher vessels
- CO2 collection, inflammable
- 2 Mehrer TZW 70 CO2 compressors
- 2 Carbon filters
- 2 Dehydrators
- CO2 Liquefier
- CO2 Storage Tank
- 2 Cooling compressors GEA Grasso GD-3 for R717
- Air cooled condenser for NH2 compressors
- Alarm center for CO2 and NH3 concentration
- Station for 40 kg CO2 still tank filling
- CO2 pumping station from a truck to the factory
- CO2 purification tester
- Steam heated evaporator for liquid CO2
Detailed technical information available for serious buyers
Drum and Container Filling Line, Semiautomatic YOC 2006
The line is designed for filling both 1000 liter IBC’s and normal 209 liter drums / barrels. It consist of straight chain driven heavy duty roller conveyor which is carrying IBC’s or a standard pallet loaded with four drums / barrels through the filling process and conveying them for further storing. The filling machine is semiautomatic coarse-and-fine filling station; first is programmable volumetric and then fine filling with integrated weighing system. Cap closing / bunging and sealing will be made manually but a machine aided. The station operation is controlled by Siemens S7C programmable logic.
The line is manufactured in 2006 by Finnish company “Insinööritoimisto Jyrki Kekälainen” who is specialized supplying automation solutions filling and packing applications.
Operation description:
The operator lifts the empty containers on the conveyor (open the cap of container), the container will move into filling machine and it will be filled automatically with 2 "and 1 / 2" valves, coarse-and fine-filling. After filling the container will move out of the machine and the operator will fix the label and close the cap. After the filling station there is ~16 m long puffer conveyor for the filled IBC`s, where a fork lift will pick up the IBC`s
In drum filling the operator lifts the empty drums on pallet (open the caps). Then he lifts the pallet on the conveyor. In the machine there is an extra filling lence for the drums. The drums are filled on the weighing system of the machine which is controlling the filling of each barrel. After the drum is filled the operator move the lence into second drum and machine start to fill it. After all drums are filled the pallet will move out of machine and the operator will close the caps and fix the seals and labels.
Technical data:
Manufactured in: 2006
Suitable for: Standard IBC and Drums
Max filling weigh: 1500 kg
Filling accuracy: 0.5 kg
Filling capacity: 7 IBC/hour or 35 Drums (209 liters) / hour
Roller conveyor type: Chain Driven, Galvanized
Roller conveyor length: Approx 16 meters
Roll diameter: 80 mm.
7 Engine Valves Suppliers
Short on time? Let Engine Valves sellers contact you.
Yogurt production and packaging line 4000 l / shift
0732010 Yogurt production and packaging line 4000 l / shift
Yogurt production equipment consists of 4 pcs 1000 liters of yogurt fermentation tanks, transmission equipment and a fully automated filling line 150 - 200 grams plastic cups. Process operation requires two people and equipment can be made about 4000 liters (or 20000 pieses) of 200g canned yogurt cups or other similar product for a normal 8-hour working shift. Packaging equipment is manufactured in the 1980s by German Ganzhorn & Stirm (nowadays Casti) and an automatic product cup feeder has been added later on the line. Also the tray feeding device has been recently added. The production line is fully operational and suitable besides for yogurt production, also for all curdled / fermented milk packaging in 150g-200g cups.
Fermentation tanks are double walled 1000 liter stainless steel vertical tanks. The product temperature can be adjusted as desired (e.g.36C) by using heating water between double walls. Control valves are manually adjusted.
The fermented yogurt is transferred to two 100 liter feeding tanks of the packing line with gentle rotary lobe pumps. Filling the yogurt cups is fully automated 2-lane packing process. The main equipment are manufactures by German Canzhorn & Srimin. Later installed automatic cup feeding equipment places 150 gr - 200 gr cups in 2 rows on the filling machine. The filling machine fills cups in three phases; first to the bottom desired volume of jam and then two different layers of product mass. ( 3-layer of yogurt). The cups are closed with aluminum lids which is sealed with electric heater. Transfer conveyor moves closed cups on to a palletizing machine which loads 20 cups on each cardboard or plastic tray (tray is automatically fed by a tray feeding device) where full trays are moved to a stacker machine which piles several layers of trays (up to 1 meter tall) for transportation.
Technical Specifications:
The manufacturer: Ganzhorn & Stirm (Casti)
Filling machine type: DOGatherm 61
Stacker type: BE 75/2
Production capacity: up to 4000 liters / shift
Yogurt fermentation tanks: 4 x 1000 liters
Cups & filling: 150 - 200 g / max. 3-layer filling
Filling line length: about 12 meters.
Very little operated (ony 6000 hours totally!) fuel oil fired package boiler made by Högfors (nowadays Foster Wheeler) in 1988. Complete plant with combustion air fan and feed water pumps for immediate delivery, in very good condition.
Main scope of the delivery:
- Högfors 30 t/h boiler
- Oilon burner
- Economizer
- Combustion air fan
- 2 pcs of 90 kW / 25 bar KSB feed water pumps
- Fuel oil pumping unit made by Oilon
- 8 pcs of steam shoot blowers
- valves, fittings and maintenance supports .
Type of boiler Water tube type with natural circulation, with two drums
Manufacturer Kymin Osakeyhtiö, Högfors, Finland (Foster Wheeler)
Model of the boiler: H52-47-25 bar
Year of manufacturing 1980
Starting day of operation 16.11.1980
Evaporation 47 t/h saturated steam
Temperature of steam 226 oC
Effect 30 MW
Structural pressure 25 bar
Feed water temperature 120 oC
Furnace volume 74,5 m3
Surface of furnace c. 136 m2
Surface of convection part 420 m2
Surface of economizer c. 504 m2
Water volume 15,8 m3
Oil Heavy oil (POR 230)
Oil burner Saacke SKV, fully automatic, modulating
Regulating area of burner 610-3050 kg/h
Oil pumping- and pre- Oilon Osva 4000 kg/h
heating station
Feed water pumps 2 pcs + 1 pc as spare.
KSB-centrifugal pump MOVI 65/6,
massflow 59 t/h, 29,5 bar
motor 90 kW, 2900 r/min
Primary air fan Mercantile KDER 75, 37300 Nm3/h, motor 115 kW, 1500 r/min
Sootblowers Diamond Superior sootblowers 4 pcs in boiler part
Diamond Superior sootblowers 4 pcs in economizer.
Dimensions of boiler part: Height 5,2 m, Width c. 4,5 m, Length 10,0 m
Weight of boiler part c. 54 t. without water and accessories
Weight of economizer c. 15 t. without water and accessories
Boiler is suitable for gas operation by changing the burner.
The boiler has been in operation only about 6.000 hours.
Equipment for SaleGeneral Industry Textile Machinery Process Equipment Energy & Power
Gas & HFO Boilers Wind Turbines.
