Hot sale fiberglass tube, the technology is roll-wrapped, so it's more durable. About the technology, we have roll-wrapped, pultrusion, pull-winding, etc. It can be used as requested. Surface finish, it can be yellow, red, etc. It can be produced according to your request. Diameter, 500mm below, but it can be customized according to the order. About the length, we also can manufacture it according to your request. If you have any doubts, you can contact us at all times
Carbon fiber rolls for industry, surface finish is natural in general, but it depends on the actual situation.
The material is carbon fiber, and we adapt roll-wrapped technology, so it has higher strength and lighter weight.
About the diameter and length, it according to your request.
It's used for industry as a roller.
if you have any doubts, you can contact us at all times.
Carbon fiber antenna mast, the length we have 18ft~84ft, but we can customize the products according to your request.
About the diameter, the smallest inner diameter is 20.5mm, thickness is about 1.4~1.5mm.
Surface finish is natural, 3k plain/twill, etc, it depends on your actural situation.
We have B series(horizontal clamp) or X series(vertical clamp) for you to choose. This model is X series. The material is Nylon(PA66). The color that we have red and black.
Fiberglass cloth is an engineering material, which has many excellent characteristics, such as anti-burning, corrosion resistent, stable structure, heat-isolating, minimum elongated shrinkage, high intensity, etc. This new material product has already covered many domains such as electric appliance, electronic, transportation, chemical engineering, architectural engineering, heat insulation, sound absorption, fire prevention and environmental protection, etc. According to fabric organizational structure and appearance, there are such kind of products: plain weave, twill weave, satin weave, gauze weave.
Organizational Structure and Application
1)Plain weave: it can be used in electricity insulation materials and reinforced materials in industry, because of its tight structure, plain and clear lines.
2)Twill weave: compared with plain weave, it is of high density, high intensity, with a soft and loose structural weave. It can be used as ordinary reinforced materials, filter materials, and painting cloth,
3)Satin weave: compared with plain weave and twill weave, it can made out better products with higher density and intensity, as well as better handle, soft and loose structura. It is applicable higher reinforced material in machinery, (also said long shaft satin)
4)Gauze weave: there are clear and uniform gauze holes on the surface of such product, stable structure, it is mainly used in the wall heat preservation decoration and the resin grinding wheel enhancement cloth.
Plain weave window screening
Function: widely used in building trade, stock raising, garden, all kinds of airiness and establishment of preventing mosquito and insect
Feature: glass fiber single silk coated plastic plain weave window screening is a kind of mesh product, which is made of glass fiber single silk coated resin, through beaming, weaving and heat finalize the design series process. This product possess many fine function, such as excellence anticorrosion, high tensile strength, deformation resistance, non adsorb , using for long time and with top stiffness.
Color: national popular color black, hoariness, which are fit the eye, its appearance is elegance.
1929 Fiberglass Suppliers
Short on time? Let Fiberglass sellers contact you.
FIBER GLASS MESH
This product is a new pattern building material and is necessary goods in modern building. It is the main material in outer wall heat preservation, interior wall anti cracking.
Application:Cement,plastic,asphalt,marble,roof,inside and outside wall etc.
Characteristics:High strength,excellent alkali &acid resistance,strong adhesion with resin,easy dissolution in styrene,with top stiffness and locativeness,widely used as an ideal reinforcement material.
Specification: 5 mesh, 6 mesh,7 mesh, 60g---180g.
If needed special specification, please order the goods.
Brief description:As one of biggest duct rodder manufacturers in Asia, we provide the duct rodder with high quality and competitive price. We could produce from 4 to18mm diametersduct rodder, and provide duct rodder adding with copper wire, stainless steel wire for detecting uses. So the duct rodder is also called Detectable Rodders. According to customersrequirement, We could produce different length and colorr duct rodder.
Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order
Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice.
Material Fiberglass (inner) and high density polytgtkebe(outer)
Density >1.9gr/cm3
Working temperature - 40 to + 80
Minimum pulling strength 4000 N5%
Tensile Modulus >46.500Mpa
Frameless fiberglass wall mural
Handmade for a unique touch
Exceptional durability for long-lasting beauty
Easy to clean and waterproof for hassle-free maintenance
Impressive three-dimensional effect adds depth to any space
Suitable for both interior and exterior applications
Free shipping for added convenience
Effortless installation with screws
The insulation is white, loose-fill virgin fiberglass designed for pneumatic machine installation behind non-woven Optima fabric, or loose-fill the attic.
Product Information:
The fiberglass knitted stitched felt is made by cutting the fiberglass raw yarn into a certain length, randomly and uniformly distributed, and then stitched with stitching thread. It's mainly applied to fiberglass pipes, pultrusion profiles and insulation materials.
Weight(g/m2): 300g/m2~1800g/m2
Width(mm): 100mm-3900mm.
Also can select to add the Polyester veil (30g/40g) or chopping layer(300g) according to the customer's requirement.
Applications:
It's mainly applied to fiberglass pipes, pultrusion profiles and insulation materials.
Packaging Information:
It is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or kraft paper. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets.
Product Information:
Fiber glass cloth is a multi-directional reinforced fabric made of glass fiber yarn, with plain weave, twill weave, satin weave.
Fiberglass cloth is an engineering material, which has the excellent merit such as anti-burns, anti-corrosion, stable-size, heat-isolation, minimum elongated shrinkage, high intensity.
1. Suitable for reinforced unsaturated resin, vinyl resin, epoxy resin, phenolic resin
2. Widely used in hand lay-up, pultrusion, winding and vacuum infusion and other processes
3. This new material product has already covered many domains such as electric appliances, electronic, transportation, chemical engineering, architectural engineering, heat insulation, sound absorption, fire prevention and environmental protection, etc. Terminal products include: pultruded profiles, auto parts, yachts, pipes, plates, sports equipment, wind energy blades and other FRP products.
Product Properties:
1.High intensity and quick wet out
2.Anti-corrosion and electric insulation
Packaging Informationï¼?
It is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or woven bag. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets for Fiberglass stitched mat.
Product Information:
Fiberglass Chopped Strand Mat is made by chopping continuous strands into unit length chopped strands which to be spread out randomly and evenly, then bonding them together with powder or emulsion binder. Chopped Strand Mat is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost.
It is used primarily for hand lay-up process, filament winding process and press molding of FRP products. It is suitable for the application by hand lay-up FRP molding, such as, various sheets and panels, boat hulls, boat tubs, cooling towers, corrosion resistant, vehicles, etc.
Normal width is 1040mm/1270mm, but also can produce it according to your requirements.
Product Advantages:
*Short strands of fibers held together by a styrene binder
*Builds up thickness quickly
*Very economical and offers good stiffness.
*Conforms to tight curves and corners
*Can be torn of cut to size
*Low cost and easy to use
Packaging Information
Fiberglass stitched mat is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or kraft paper. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets for Fiberglass stitched mat.
Product Information:
Carbon Fiber Surface Mat is a non-woven tissue made from randomly oriented carbon fibers distributed in special binder by a wet lay process. It's a new super carbon material, with properties of high performance reinforced, high strength, high modulus, fire resistant, corrosion resistant, fatigue resistant composites.
It's mainly applied to aerospace, medical instrument, sports equipment, conductivity, anti-static, and anti-spark properties and car parts etc.
It is made of randomly yet evenly distributed chopped strands fiber of 50mm or 100mm length stitched by polyester thread. It has high tensile strength and is recommended for Pultrusion process,Uncontinuous winding Process & Laminates.
Products Property:
No any Binder, good compatible with Multi-Resin
Optimal mechanical performance
Easy workability and low cost
Standard width: 120cm/127cm/160cm Max. width 320cm, Min. width 3.5cm
Standard Roll weight: 45/48/60kg
Packaging:
Each roll is wound on paper tube (3"-4"Dia.) with plastic film and packed in individual cardboard box.
16 or 12 cartons per Pallet.
The strength of fiberglass stitched mat is stronger than CSM,the price is cheaper. We export large quantity for pipe winding.We can provide big roll to reduce your replacing frequency and save your cost.We suggest stitched mat instead of chopped strand mat for pipe application.
Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. Stitch Mat will not wash out in RTM process. and can be pre-wet and moved for proper placement in wet lay-up open molding. it gives uniform thickness compared to extra spray-up in open molding. it is low cost alternative for building thickness and stiffness, where the component is not weight critical.
Binderless chopped E-Glass, stitched at 7 gauge
The chopped strand length is 5cm or 10cm, 10cm for pultusion to improve the strength.
Fiberglass continuous mat provides fast, thorough wet-out.Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. And can be pre-wet and moved for proper placement in wet lay-up open molding...
The chopped strand length is 5cm or 10cm, 10cm for pultusion to improve the strength.
Properties:
Fiberglass no certain direction,good homogeneity.
No powder or emulsion,sink quickly and easy to operate.
High tensile strength,esay to operate.
Good impact strength of finished products.
Stitched fiberglass fabric (also called veilmat) is produced by stitching a polyester veil (tissue) to chopped strands. Polyester veil is around 45G/M2. Polyester veil has feature of anti-aging & water resistant, and also gives good surface to finished product. It is for pultrusion, especially for thin pultrusion product, closed mould process, or pipe winding. we export this materials to different countries like Exel composites in Australia, Iran, Ukraine, Italy, Malaysia and so on.
Stitch type: Tricot stitch on veil side, pillar stitch on CS. The chopped length is 100mm. Gauge is F5(space between needles 7mm).
Roll Length: Nominal linear 200meters +/-1m, the min width is from 150-3000mm.
Knitted mat is binderless characteristic, provides fast, thorough wet-out.
Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. Stitch Mat will not wash out in RTM process. and can be pre-wet and moved for proper placement in wet lay-up open molding. it gives uniform thickness compared to extra spray-up in open molding. it is low cost alternative for building thickness and stiffness, where the component is not weight critical.
Binderless chopped E-Glass, stitched at 7 gauge
The chopped strand length is 5cm or 10cm, 10cm for pultusion to improve the strength
It is made of randomly yet evenly distributed chopped strands fiber of 50mm or 100mm length stitched by polyester thread. It has high tensile strength and is recommended for Pultrusion process,Uncontinuous winding Process & Laminates.
Products Property:
No any Binder, good compatible with Multi-Resin
Optimal mechanical performance
Easy workability and low cost
Standard width: 120cm/127cm/160cm Max. width 320cm, Min. width 3.5cm
FRP is a fire-rated material made from fibreglass sheets and bonded through synthetic resins. It is extremely sturdy, rigid and light weight. We can supply FRP meter boxes and other such moulded products as per customer's specific requirements.
1929 Fiberglass Suppliers
Short on time? Let Fiberglass sellers contact you.
