The fiberglass alkaline-restance mesh fabric is on the basis of c-glassor e-glass woven fabric, then coated by acrylic acid copolymcrliquid. Mesh size:3x3mm 4x4mm 5x5mm 10x10mm weight:30-300g length:50m-100m width:20cm-200cm color:white, orange, blue, etc.. Packing 1. Shrink only. 2. Shrink and woven bags. 3. By shrink film first each roll, then put into carton delivery:within 15 days after receipt of deposit
The fiberglass alkaline-restance mesh fabric is on the basis of c-glassor e-glass woven fabric, then coated by acrylic acid copolymcrliquid. Mesh size:2.5x2.5mm 3x3mm 4x4mm 5x5mm weight:30-300g length:50m-100m width:20cm-200cm color:white, orange, blue, etc.. Packing 1. Shrink only. 2. Shrink and woven bags. 3. By shrink film first each roll, then put into carton delivery:within 15 days after
The fiberglass alkaline-restance mesh fabric is on the basis of c-glassor e-glass woven fabric, then coated by acrylic acid copolymcrliquid. Mesh size:2.5x2.5mm 3x3mm 4x4mm 5x5mm weight:30-300g length:50m-100m width:20cm-200cm color:white, orange, blue, etc.. Packing 1. Shrink only. 2. Shrink and woven bags. 3. By shrink film first each roll, then put into carton delivery:within 15 days after receipt
The fiberglass alkaline-restance mesh fabric is on the basis of c-glassor e-glass woven fabric, then coated by acrylic acid copolymcrliquid. Mesh size:3x3mm 4x4mm 5x5mm 10x10mm Weight:30-300g Length:50m-100m Width:20cm-200cm Color:white, orange, blue, etc.. Packing 1. Shrink only. 2. Shrink and woven bags. 3. By shrink film first each roll, then put into carton Delivery:within 15 days after receipt of deposit.
Fiberglass mesh Mesh size:2.5x2.5mm 3x3mm 4x4mm 5x5mm 10x10mm Weight:80-160g Length:10m-100m Width:20cm-200cm Color:white, orange, blue, etc.. Yarn:c-glass yarn Package:1. Shrink only. 2. Shrink and woven bags. 3. By shrink film first each roll, then put into carton
Fire Area 6 9 11 Micron C Glass Fiber Yarn Fiberglass Glass Fiber Yarn Glass Fiber Yarn Description: 1. It is made of fiberglass roving yarns which are bulked and blown through special instrument with high pressure air. 2. It has high strength as continuous fiber and fluffiness as staple fiber, low thermal conductivity coefficient, high dust-accommodation and filterability. 3. Glass fiber texturized yarn with metallic (copper wire, inconel wire or stainless wire) are also available. Glass Fiber Yarn Applications: 1. Fiberglass yarn has advantage as insulating ability. 2. It is good and fire resistant against heat material, used as heat insulation, electrical insulation materials and also made into other products. 3. It with metallic can extensively apply to friction materials. 4. It is the excellent substitute for asbe stos. Beschreibung: Ein. Es ist aus Glasfaser Vorgarnen die gebauschten und geblasenes durch spezielle Instrument mit Hochdruckluft sind hergestellt. 2. Es hat eine hohe Festigkeit als kontinuierliche Faser und fluffiness als Stapelfaser, niedrige Wärmeleitzahl, hohe Staub-Unterkunft und Filtrierbarkeit. 3. Texturized Glasfasergarn mit metallic (Kupferdraht, Inconel Draht oder rostfreier Draht) sind ebenfalls erhältlich. Anwendungen: Ein. Fiberglasgarn hat den Vorteil als isolierende Fähigkeit. 2. Es ist gut und Feuer beständig gegen Hitze Material, wie Wärmedämmung, elektrische Isolierstoffe und machte auch in anderen Produkten verwendet. 3. Es wird mit metallischen kann ausgiebig, um die Reibung Materialien. 4. Es ist der ausgezeichneter Ersatz für Asbest. RFQ� 1. What is your MOQ? MOQ may vary by customer's special requirement; we try our best to meet your business requirement. 2. What's your payment terms? We normally do T/T, and we can also offer western union account for transfer money. And more flexible payment terms, welcome to have a discuss. 3. Can you provide samples? Yes, we can offer samples, and some samples are free 4. Can you delivery by express? Yes, we can delivery by any express. 5. When will the sample be ready? Normally, the sample can be ready in 3 days.
Fiberglass mesh: Fiberglass mesh are used for liquid metal pouring system of foundry industry. It can remove the gas, non-metallic impurities so as to remove the slag, sand hole, air hole and reduce the waste products. The character are low cost, anti-corrosion, high temperature and impact resistance, easy to use and etc. Main products: molten steel mesh, molten iron mesh, molten aluminum, molten copper and cap type mesh. Size: 0.8x0.8, 1.0x1.0, 1.2x1.2, 1.5x1.5, 2.0x2.0, 2.5x2.5so on. Also the size can be supplied as clientâ??s requirement.
Good Quality Cheap 18x16 PVC Coated Fiberglass Window Screen After more than 18 years development, Hebei Xusen has become one of the biggest Window Screen Manufacturer in China. Fiberglass Window Screen is also called fiberglas insect screen, fiberglass mosquito net. It is one of the most popular window screen in the world. Material Fiberglass yarn with PVC coating(35%fibe-yarn + 65%PVC Weight 105g-135g/m2 Mesh size 14x16mesh ,16x16mesh ,17x15mesh ,18x16mesh ,18x18mesh, 20x20mesh .etc. Weave type Plain weave Color grey, dark grey, black, white, brown, green, blue (customized) Roll wide 0.2-3.2m Roll length 30m-300m, as you need 2.Application: Fiberglass window screen use for all sorts of airy installation preventing insects and mosquitoes in construction,orchard,ranch window or doors. We promise to produce good quality and strict mesh size window screen to you! Samples are free,if you need, please contact with us. 3.Characteristic: 1) Effective insect barrier. 2) Easily fixed and removed, sun-shade, uv proof. 3) Easy Clean ,No smell , good for health. 4) the mesh is uniform, no bright lines in the whole roll. 5) Touch soft , no crease after folding. 6) Fire resistant, good tensile strength,long life.
Fiberglass Insect Screening mosquito nets for windows screens/Fiberglass Insect Screen 1.Size:18*16 18*14 16*16 16*14 2.Width:60~280cm 3.Weaving:plain weaving 4.Main color:Grey,Black
Fiberglass Insect Screening mosquito nets for windows screens/Fiberglass Insect Screen 1.Size:18*16 18*14 16*16 16*14 2.Width:60~280cm 3.Weaving:plain weaving 4.Main color:Grey,Black
Fiberglass Insect Screening mosquito nets for windows screens/Fiberglass Insect Screen 1.Size:18*16 18*14 16*16 16*14 2.Width:60~280cm 3.Weaving:plain weaving 4.Main color:Grey,Black
Fiberglass Insect Screening mosquito nets for windows screens/Fiberglass Insect Screen 1.Size:18*16 18*14 16*16 16*14 2.Width:60~280cm 3.Weaving:plain weaving 4.Main color:Grey,Black
Fiberglass Insect Screening mosquito nets for windows screens/Fiberglass Insect Screen 1.Size:18*16 18*14 16*16 16*14 2.Width:60~280cm 3.Weaving:plain weaving 4.Main color:Grey,Black
Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod WanQi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod WanQi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod WanQi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Cable Joint as an important connection point of the whole power supply network, its running stability will directly affect the quality of the power supply system. Because the cable joint is made artificially in the on-site installation is complete, the environment affected by the construction and operation of the environment, will inevitably cause the error of installation, external damage, cable breakdown caused by explosion and water etc. And in the Cable Joint breakdown and explosion will release a lot of energy, the surrounding power facilities or personnel to cause harm, or even cause the occurrence of the two accident. To solve these problems, our company developed with fire prevention, waterproof, explosion-proof function Scotchcast Resin Cable Joints, all-round protection, once the explosion or breakdown of cable joints, can effectively protect the surrounding power facilities and other personnel, prevent the occurrence of two damag
Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod WanQi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod WanQi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
