We are the leading supplier for the Glass Fitting Hardware as follows - Patch Fitting - Floor Spring - 3D Hinges - Glass Door handle - Silicon Saleant - PVC bar for Glass Door - Routels - And more... Feel free to contact us on
Lifting Hooks
Different sizes and material
Blind Flange Lockout BAN-F68M Item No: BAN-F68M Unit: Piece Material: PA66+ 33% Fiber + Steel Weight: 550g Color: Red Description: Device fully conceals flange bolts preventing access to the blind until all work has been completed Adjustable device provides a tight fit, adapting to multiple flanged pipe applications Recommended for use with nut diameter from 3/4in to 1-1/8in (19mm 28.7mm) Four lockout holes allow for multiple workers to lockout device at one time Durable aluminum and hardened steel construction withstands conditions indoors and out Blind Flange Lockouts BAN-F68L Item No: BAN-F68L Unit: Piece Material: PA66+ 33% Fiber + Steel Weight: 680g Color: Red
Product Introduction: Anchor Bolts Anchor bolts, also known as foundation bolts, are essential components in construction and engineering projects. They serve as a vital link between structural components and the foundation, ensuring stability and durability. This product introduction aims to provide a comprehensive overview of anchor bolts, their applications, features, and benefits. Applications: Anchor bolts are widely used in various construction projects, including bridges, buildings, dams, and other large-scale structures. They are primarily employed to anchor steel beams, columns, and other components to concrete foundations. The bolts transfer the load from the structure to the foundation, preventing any movement or displacement. Features: Strength and Durability: Anchor bolts are made from high-strength materials, such as steel, to ensure they can withstand significant loads and stresses. They are designed to last for the lifetime of the structure. Versatility: These bolts are available in various sizes, lengths, and thread types to meet the specific requirements of different projects. Ease of Installation: Anchor bolts are relatively easy to install, either by direct embedding into the concrete or using special installation tools. Compliance: These bolts are typically manufactured to comply with international standards and regulations, ensuring their safety and reliability. Benefits: Structural Integrity: Anchor bolts provide a secure connection between the structure and the foundation, ensuring the overall structural integrity of the project. Load Transfer: They effectively transfer the load from the structure to the foundation, reducing the risk of failure or collapse. Cost-Effectiveness: By providing a strong and reliable anchoring solution, anchor bolts help reduce the need for additional reinforcement or repairs, saving on overall project costs. Versatility: The versatility of anchor bolts allows them to be used in a wide range of applications, from small residential buildings to large-scale industrial facilities. In conclusion, anchor bolts are a crucial component in construction and engineering projects. Their strength, durability, and versatility make them an essential choice for ensuring the stability and safety of structures. If you're involved in a construction project that requires anchoring solutions, consider using anchor bolts to ensure the long-term success of your project.
Product Introduction: Automotive Repair Gecko Introducing the Automotive Repair Gecko, a revolutionary tool designed to revolutionize the way we approach car repairs. This innovative device, resembling the nimble and adhesive gecko, is a must-have for any DIY enthusiast or professional mechanic alike. Unique Design & Functionality The Automotive Repair Gecko is crafted with precision, featuring a lightweight yet sturdy build. Its adhesive pads, modeled after the gecko's feet, allow it to securely attach to various surfaces in your vehicle, from metal panels to glass windows. This versatility ensures that you can position the Gecko exactly where you need it for optimal access and visibility during repairs. Versatile Applications The Gecko's adaptability makes it suitable for a wide range of automotive repair tasks. Whether you're adjusting wires, tightening bolts, or installing accessories, the Gecko provides a stable and reliable platform to work from. Its adhesive pads can be cleaned and reused, making it a cost-effective and eco-friendly choice. Ease of Use Using the Automotive Repair Gecko is a breeze. Simply attach it to the desired surface, adjust the angle to your preference, and get to work. The Gecko's compact size and lightweight design make it easy to maneuver and store, perfect for both home and workshop use. Superior Durability Built to last, the Automotive Repair Gecko is made from high-quality materials that can withstand the rigors of daily use. Its adhesive pads are designed to maintain their grip even after repeated applications, ensuring that your Gecko stays put when you need it most. Conclusion The Automotive Repair Gecko is a game-changer in the world of automotive repairs. Its unique design, versatile applications, ease of use, and superior durability make it a must-have tool for anyone who takes pride in their vehicle's maintenance. Invest in the Automotive Repair Gecko today and experience the difference it can make in your repair projects.
Product Introduction: Drill Tail Screws (Self-Drilling Screws) Drill tail screws, commonly referred to as self-drilling screws, are innovative fasteners that combine the functionality of a drill bit and a screw into a single unit. These screws are designed to penetrate through thin metal sheets or other materials, creating their own threads as they are tightened. The drill tail screw consists of a threaded shank with a sharp drill point at the tip. This drill point enables the screw to penetrate the material easily, while the threaded shank ensures a secure grip and fastening. The screws are typically made from high-strength steel alloys, which provide excellent durability and resistance to corrosion. Our drill tail screws are widely used in various applications, including: Sheet Metal Work: Perfect for fastening metal sheets, such as roofing panels, gutters, and siding, to wood, steel, or other materials. Automobile Manufacturing: Used in the assembly of cars and other vehicles, especially where lightweight materials are employed. Construction and Renovation: Ideal for attaching fixtures, trim, and other components to metal framing or surfaces. Furniture Manufacturing: Ensures secure fastening of metal components in furniture frames and structures. The key benefits of using our drill tail screws are: Versatility: Suitable for use in a wide range of materials, including steel, aluminum, and some plastics. Efficiency: Eliminates the need for pre-drilling, saving time and effort during installation. Strong Holding Power: Creates secure, threaded connections that resist loosening over time. Durability: High-quality steel construction ensures longevity and reliability. Whether you're a professional contractor, manufacturer, or DIY enthusiast, our drill tail screws provide a fast, easy, and reliable solution for your fastening needs. Try them today and experience the difference!
Product Introduction: Self-Tapping Screws Self-tapping screws, also known as self-drilling screws, are a type of fastener that combines the functions of drilling and tapping into one convenient process. These screws are designed to create their own threading as they are driven into materials, eliminating the need for pre-drilling or tapping holes. Self-tapping screws are crafted with a unique drill point that allows them to penetrate and form threads in metal sheets or other materials. This design not only simplifies installation but also significantly reduces installation time, as separate drilling and tapping steps are not required. Our self-tapping screws are made from high-quality steel, ensuring durability and strength. They are coated with a corrosion-resistant finish, making them suitable for use in various environments, including outdoor applications. These screws are ideal for a wide range of applications, such as: Attaching metal roofing or siding to a structure. Securing metal panels or frames together. Fastening components in automotive, aviation, or other industrial applications. The key advantages of using our self-tapping screws include: Quick and Easy Installation: With no need for pre-drilling, these screws save time and effort during installation. Strong and Secure Fastening: The self-tapping mechanism ensures a tight and secure fit, providing excellent holding power. Versatility: Suitable for use in various materials, including metal, wood, and plastic, depending on the screw type. Durability: The corrosion-resistant finish extends the lifespan of the screws, even in harsh environments. Whether you're a professional contractor, a DIY enthusiast, or anyone in need of a fast and efficient fastening solution, our self-tapping screws are the perfect choice. Order now and discover the convenience and reliability they offer for your fastening needs.
Product Introduction: Lead Screws (Ball Screws) Precision lead screws, commonly referred to as ball screws, are highly efficient and accurate mechanical components that convert rotational motion into linear motion. These versatile devices are essential in numerous industrial and commercial applications requiring precision positioning and movement. The core of a ball screw system consists of a threaded screw shaft and a nut that travels along it. Inside the nut, there are recirculating ball bearings that roll between the screw shaft's threads and the nut's raceways, significantly reducing friction and wear. This design enables ball screws to achieve high-speed, smooth, and accurate linear motion with minimal backlash. Our ball screws are manufactured using premium materials and advanced manufacturing techniques to ensure durability, precision, and long-term performance. The ball bearings are carefully selected and lubricated to optimize efficiency and reduce wear. The screw shafts and nuts are precision-ground to ensure tight tolerances and smooth operation. Here are some of the key benefits of using our ball screws: High Accuracy: Ball screws provide exceptional positioning accuracy, making them ideal for applications requiring precise control of linear motion. Smooth Operation: The recirculating ball bearings ensure smooth and continuous movement, reducing noise and vibration. High Efficiency: The low-friction design allows ball screws to operate at high speeds with minimal power consumption. Long-term Durability: Premium materials and manufacturing techniques ensure our ball screws are built to last, withstanding the demands of rigorous industrial use. Versatility: Ball screws are suitable for a wide range of applications, including CNC machining, automation systems, robotics, and precision measurement equipment. Whether you're a manufacturer seeking precision positioning solutions for your machinery or an engineer looking for high-performance linear motion components, our ball screws offer an excellent choice. Contact us today to learn more about our product range and how we can help you achieve your desired level of precision and performance.
Product Introduction: Expansion Bolts Expansion bolts, also known as anchor bolts, are a type of fastener specifically designed for anchoring objects or structures securely to concrete or masonry. These bolts work by expanding within a pre-drilled hole, providing a strong and permanent connection. The expansion bolt consists of three main parts: the bolt, the expansion sleeve, and the nut. During installation, the bolt is inserted into a pre-drilled hole, along with the expansion sleeve. As the bolt is tightened, the expansion sleeve is forced to expand radially, wedge tightly against the walls of the hole, and anchor the bolt securely in place. Our expansion bolts are made from high-quality materials, ensuring durability and longevity. They are suitable for use in a wide range of applications, including but not limited to: Mounting heavy equipment or machinery to concrete floors or walls. Installing signboards, handrails, or other fixtures to masonry or concrete surfaces. Securing structural steel members to concrete foundations. The key benefits of using our expansion bolts include: Easy Installation: With simple tools and basic DIY skills, you can easily install these bolts. High Load Capacity: Our expansion bolts are designed to withstand significant tensile and shear loads, ensuring a secure and reliable anchor point. Versatility: Suitable for use in various materials including concrete, brick, and stone. Cost-Effective: Provides a permanent and cost-effective solution for anchoring needs. Whether you're a professional contractor working on a large-scale construction project or a homeowner embarking on a DIY renovation, our expansion bolts are the perfect choice for all your anchoring needs. Order now and experience the difference in quality and performance that our products offer.
Product Introduction: Hexagonal Bolt Introducing our premium Hexagonal Bolt, a crucial component in various industrial and construction applications. This bolt, characterized by its six-sided head, offers exceptional performance and durability, ensuring a secure and reliable fastening solution. Key Features and Benefits: Durable Construction: The Hexagonal Bolt is crafted from high-grade steel alloy, making it exceptionally strong and able to withstand heavy loads and frequent usage. This ensures long-lasting performance and minimal wear and tear. Precise Threading: The bolt features precision-cut threads that offer excellent grip and hold, preventing loosening or slippage during operation. This ensures a tight and secure fastening. Easy Installation and Removal: The hexagonal head design allows for easy tightening and loosening using a wrench or screwdriver. This significantly reduces installation and removal time, improving overall efficiency. Versatile Applications: Our Hexagonal Bolt is suitable for a wide range of applications, including automotive, machinery, construction, and more. Its universal design ensures compatibility with various materials and surfaces. Corrosion Resistance: The bolt is treated with a corrosion-resistant coating that protects it from rust and oxidation, even in harsh environments. This extends its lifespan and ensures consistent performance over time. Technical Specifications: Material: High-grade steel alloy Thread Type: Standard metric or inch thread Finish: Corrosion-resistant coating Head Style: Hexagonal Sizes Available: Various sizes to meet different requirements Conclusion: Our Hexagonal Bolt is a reliable and dependable fastening solution for various applications. Its durable construction, precise threading, easy installation, and corrosion resistance make it a must-have for any industrial or construction toolbox. Order yours today and experience the difference!
Hexagonal Nut Product Introduction Introducing our premium quality hexagonal nuts, a vital component in various industrial and mechanical applications. These nuts are designed to provide superior strength, durability, and reliability, ensuring the safety and efficiency of your operations. Features and Benefits: Strength and Durability: Our hexagonal nuts are crafted from high-grade materials, such as stainless steel or carbon steel, ensuring they can withstand heavy loads and frequent use. The hexagonal shape also provides superior grip and torque transfer, ensuring a secure and tight fit. Versatility: These nuts are compatible with a wide range of bolts and threads, making them suitable for a variety of applications. Whether you're working on a construction site, in a manufacturing facility, or in an automotive workshop, our hexagonal nuts will fit your needs. Easy to Use: The hexagonal shape allows for easy installation and removal using standard tools like wrenches and pliers. This not only saves time but also reduces the risk of damage to the nut or the surrounding material. Corrosion Resistance: Many of our hexagonal nuts are treated with corrosion-resistant coatings, such as zinc plating or galvanizing, to protect them from rust and other forms of degradation. This extends their lifespan and ensures they can be used in harsh environments. Cost-Effective: Our hexagonal nuts are competitively priced, offering excellent value for money. With their superior performance and durability, they are a cost-effective solution for your fastening needs. Applications: Our hexagonal nuts find applications in various industries, including: Construction: Used in beams, frames, and other structural components to provide secure connections. Manufacturing: Used in machinery, equipment, and tools to ensure precision and durability. Automotive: Used in automobiles, trucks, and motorcycles to secure components and fasten parts. Conclusion: With their superior strength, durability, and ease of use, our hexagonal nuts are an essential component for any industrial or mechanical application. Whether you're looking for a reliable solution for your current project or need to replace worn-out nuts, our hexagonal nuts are the perfect choice. Contact us today to learn more about our products and how they can benefit your operations.
YA380550: 1.88", 5/8" -18UNF, 1/2", 9/16"; YA380556: 2.00", 1/2" -20UNF, 1/2", 9/16"; YA380557: 2.00", 5/8" -18UNF, 5/8", 9/16"; YA380550: 2.00", 5/8" -18UNF, 1/2", 9/16";
Aluminum Alloy Lever Block Introduction: Aluminum Alloy Lever Block is an efficient, safe and durable lifting tool. This product is cost-effective, wide range of applications, the product uses advanced design technology, with the rapid adjustment of the hook function, good braking performance, high efficiency. Aluminum Alloy Lever Block Advanced Features: 1.Lever block is a kind of simple to use,easy to carry the manual hoisting machinery.It have an important roles especially in the open and no power conditions . 2.The use of safe and reliable, convenient maintenance, high mechanical efficiency,hand catenary pull small. 3.The lighter weight,easy to carry, bequtiful appearance, small size,durable. Aluminum Alloy Lever Block Precautions: 1.It is prohibited to overload objects, lengthen the handle or to operate the handle with foot. 2.Make sure that the upper and lower hooks are fixed before using, and make the load in the middle of the hook chamber. 3.Avoid pulling any heavy objects on the sharp angle of the hook. The lever hoist should be in parallel with the bound objects when used to fasten articles. 4.It is not allowed to use when the chain is reversed, and the hooks should be replaced when the shaft axial tilt angle is greater than 10 degrees.
