Exporters of iron pan, hoes, pick axe, shovel, crowbar, hammer.
Advantages: 1. Made of hot galvanized sheet with high anti-corrosion ability. 2. Fine workmanship, exact dimension and good installation. 3. Various capacity: 7tons,10tons,13tons 4. It is firmly connect and excellent sealing performance. Diameter: 2.75m( 3 layer wave sheet) Height: 6.27 meter Capacity: 16.4 cub meters.
Claas harvester parts.
This crankshaft for claas and 4 curves 8 kg 30, 80 diameter we are manufacture short and long crankshaft.
Weight (kg): 122 Gear shift: Forward High: 9.4 (km/h) Low: 4.5 (km/h) Reverse: High: 6.8 (km/h) Low: 3.2 (km/h) Handle rotation: 360O rotation at 12 position Handle height adjustment: 6 section height adjustment Clutch mode: Belt tenshioning pulley Engine: diesel engine air-cooled rated power 7.8.hp Max output is 9.hp Start mode: Hand Driving way: Gear shift Tilling depth (mm): 50-300 Tilling width (mm): 400-900 Tyre: 400-8/400-7. Dimension(L,W,H)mm: 1600,570,970 Weight (kg): 122.
Laminated tire are manufactured for the ultimate in wear capacity. In some cases, our laminated tire can outlast the equipment on which they are installed. The tire are manufactured by a special manufacturing process using hundred of tones of pressure to create a high quality, long lasting tire to withstand some of the worst, most demanding environments. Sidewalls of used tires are specially cut to sizes .These recycled sidewall pieces are then formed into tires that provide all the benefits of a solid tire while at the same time providing a toughness necessary for the most demanding industrial environments. Our laminated tires are manufactured to fit most industrial and commercial Rotary Cutters i.e. John Deere, Bush Hog, Woods & Others. Steel pellets.
We are the leading manufacturer and Exporter Company for agriculture machineries in Punjab / India. We export our machineries in different countries. Our product Rotary Tiller is the best one from our exports products. For details please contact us.
Peanut harvester is mainly used for harvesting peanut, garlic, sweet potato, potato and other crops under the ground with the merits of high efficiency, lower breakage, running fast without trembling, no blocking by the grasses, the structure is simple and the operation life is long, etc model GL-S1 Capacity(m2/h) 3000-4000 Crushing ratio ¡Ü1.0% Total loss ratio ¡Ü4.5% Buried loss ratio ¡Ü2.0% Digging depth 8-12cm Working width 150cm motor of the tractor ¡Ý60HP Weight (kg) 560kg Dimension(mm) 2500*1900*1350.
HTL-125 Model SPECIFICATIONS HTL-135 Model SPECIFICATIONS Suited to: 20 - 35hp Tractors Suited to: 30 - 45hp Tractors 3-Point Linkage: Cat.1 3-Point Linkage: Cat.1 Length: 770mm Length: 770mm Width: 1480mm Width: 1570mm Height: 970mm Height: 970mm Weight: 285kg Weight: 300kg Gearbox: 35hp Gearbox: 50hp Digging Width: 1250mm Digging Width: 1350mm Digging Depth (max.): 180mm Digging Depth (max.): 180mm Blades Per Flange: 6 Blades Per Flange: 6 Adjustable Skids: Yes Adjustable Skids: Yes Rear Flap: Height Adjustable Rear Flap: Height Adjustable HTL-150 Model SPECIFICATIONS HTL-180 Model SPECIFICATIONS Suited to: 35 - 50hp Tractors Suited to: 35 - 55hp Tractors 3-Point Linkage: Cat.1 3-Point Linkage: Cat.1 Length: 770mm Length: 800mm Width: 1720mm Width: 2020mm Height: 970mm Height: 1070mm Weight: 320kg Weight: 370kg Gearbox: 50hp Gearbox: 50hp Digging Width: 1500mm Digging Width: 1800mm Digging Depth (max.): 180mm Digging Depth (max.): 180mm Blades Per Flange: 6 Blades Per Flange: 6 Adjustable Skids: Yes Adjustable Skids: Yes Rear Flap: Height Adjustable Rear Flap: Height Adjustable. 2.05X0.80X0.72Meter; 42units/40ft.
Agricultural machineries. 100kg.
Furrow plough The furrow plough is compact in construction. It is suitable for soil specific resistance:0.6-0.9kg/cm2. It produces the best work, leaving level surface etc. Model 1L-220 1L-320 1L-420 1L-520 1L-225 1L-325 1L-425 1L-525 Nos of share 2 3 4 5 2 3 4 5 Width of share(mm) 200 200 200 200 250 250 250 250 Working width (m) 0.4 0.6 0.8 1 0.5 0.75 1.0 1.25 Working depth(mm) 200-250 Weight(kg) 64 100 135 166 125 210 228 245 Matched power(hp) 15-18 25 30-40 50 25 40 50 65 Linkage Standard three-point mounted 30 Series: Model 1L-230 1L-330 1L-430 1L-335 1L-435 1L-535 1L-635 Nos of share 2 3 4 3 4 5 6 Width of share(mm) 300 300 300 350 350 350 350 Working width (m) 0.6 0.9 1.2 1.05 1.4 1.75 2.1 Working depth(mm) 220-270 270-300 Weight(kg) 64 234 307 280 553 600 228 Matched power(hp) 35 50-65 55-65 55 75 80-120 100-120 Linkage Standard three-point mounted Hydraulic Reversible plough It has a compact structure and suitable for working on all various land with the well working performance of the machine, after cultivation, the land surface is leveling, the soil clods well crushed and turned over and the furrows is small. Model 1LF-330 1LF-430 1LF-530 Working width(m) 0.9 1.2 1.5 Working depth(cm) 220-270 Nos of share 3 4 5 Linkage Three-point mounted Productivity(ha/h) 5.5-7.5 7.5-9 9-11 Matched power(hp) 55-80 70-90 100-120 Weight(kg) 580 750 950.
Product performance: The machine can not only be used for drying operation of paddy rice, corn , wheat, cotton seed and other seed, but also be used for grain drying of grain department. It can either be used as a single machine or be used in assembling line of seed processing. Product characteristics: (1) Composite structure with variable cross section, high dryness. (2)Pneumatic reciprocating discharging mechanism. (3) Principle of closed loop control, PLC automatic control, touch screen of man-computer interface, good interactivity, and simple operation. (4) Adopting light diesel oil and coal as hot resource. Main technical parameter: Productivity : range of moisture released is 5% Total motor power(Kw): 11.6 Size(mm):6020*1570*9105 Drying bin capacity(m3 ):11 Storage silo capacity(m3):30. Packing size and weight: size: (mm)ú¦6020*1570*9105.
The machine can hull, remove shells, separate and re-separate for oats. Then unhulled seeds will be returned back to huller... Oats dehulling&separating equipment Model TFYM1000 is one of Qiaopai Group's patent products. It can hull oat, remove shells from kernels, separate and re-separate un-hulled seeds from kernels. Un-hulled seeds will be returned back to huller for re-hulling again automatically. It features low electricity consumption, compact structure, minimum space occupation, low damage of seeds and kernels, very good effect of hulling and separating, easy operation and maintenance. Main parameters: Power: 12.25Kw (380V) Processing capacity: 0.8-1.0 t/h % of whole kernels: 95% min. (Broken kernel is that less than 1/2 of whole kernel) % of unhulled seeds in kernels: 2% max. % of unhulled seeds and kernels in shells: 0.3% max. Occupied area: 7.3m ¡Á 2.8m Height: 3.9m Weight:2.8mt Operator: 2 persons Meantime, our company also specializes Sunflower seed cleaning dehulling & separating equipment, pumpkin seed shelling line, melon seed dehulling line, buckwheat hulling line, hempseed dehuller, rapeseed shell removing machine, almond dehulling equipment, hazelnut peeling equipment, mung bean decorticating machine, oil press, filling and packing machine, castor bean shelling machine, dehulling machine for seed of Jatropha, acorn hulling machine, almond kernel blanching machine, peanut kernel blancher, bean cleaning machine, roaster, all kinds of cleaner, elevator, and some agro-products, such as: hulled sunflower seed kernels, pumpkin seed kernels, (roasted) buckwheat kernels, etc.
It can clean various impurities in sunflower seeds, then hull seeds, remove shells from kernels, separate and re-separate un-hulled seeds from kernels. Un-hulled seeds will be returned to dehuller for re-hulling again automatically, thus automation degree has been greatly improved. It's the most ideal equipment to process both confection and bakery sunflower kernels for human consumption and press oil industry. Main parameters of TFKH1200 Model: Power: 14.59Kw Input capacity: 0.5-0.8 t/h %of the whole kernel: 90% min. (Broken kernel is less than 1/2 of whole kernel) % of seeds in the kernels: 2-5% % of seeds and kernels in shells: 0.3% max. Occupied area: 14.4m*2.8m Height: 4.1m Weight: 5.0mt Operator: 2 persons. Main parameters of TFKH1500 vertical: Power: 16.47Kw Input capacity: 0.5-1.0 t/h %of the whole kernel: 90% min. (Broken kernel is less than 1/2 of whole kernel) % of seeds in the kernels: 2-5% % of seeds and kernels in shells: 0.3% max. Occupied area: 11.3m*3.3m Height: 5.5m Weight:5.2mt Operator: 2 persons The equipments are widely used in China, Europe, Africa and South America, etc.
Material: 65mn Thickness: 3-12mm Disc diameter: 255-960mm.
. Semi permanet shoot with special material . Simple sidigining and repairing . Automatic cleaning system . Self-diagnosis program . Sorting various grains . Mass capacity . CCD Camera sorting mode - Wide LCD Touch Screen : Han-a system developed wide LDC Touch Screen for convienient working environment. This Wide LCD Touch screen provide manual in 3 languages : Korean, Chinese, and English. Precise setting is possible with scope function. Automatic display function supports stable use of a machine. - Cutting-Edge High Frequency Ejector : Micro [recise ejector with high frequency of air shutter results in optimum sorting ability. ** Specification** 1. Capacity : 3.0~3.5 ton/hour 2. Channel : 192 ch 3. Dimension : 1650 x 940 x 1665 4. Power consumption : 2.1 kw (220v 50/60 hz)
. Semi permanent shoot with special material . Simple sidigining and repairing . Automatic cleaning system . Sorting various grains . Mass capacity . CCD Camera sorting mode - Wide LCD Touch Screen : Han-a system developed wide LDC Touch Screen for convenient working environment. This wide LCD Touch screen provide manual in 3 languages : Korean, Chinese, and English. Precise setting is possible with scope function. Automatic display function supports stable use of a machine. - Cutting-Edge High Frequency Ejector : Micro [recise ejector with high frequency of air shutter results in optimum sorting ability. ** Features ** - High sensitivity sensor CCD : Sensor technology with high sensitivity minus-electric current (LVDS Digital Technology) - Digital hybrid device : High efficiency color sorter with Digital CCD Hybrid system maintains the optimum sorting rate with the automatic control of color difference caused by temperature and grain difference. - High frequency ejector : High frequency ejector(1,000 times/sec) improves sorting ability, durability and the amount of grain sorted. ** Specification** 1. Capacity 5.0 ~ 5.5 ton/hour 2. Channel 256 ch 3. Dimension 1950 x 1200 x 1665 4. Power consumption 2.5 kw (220v 50/60 hz)
1) this implement can be matched with the back power output tractors, and crush the clods by the rotary and walking movements of blades. Its feature is the strong crushing capacity of clods, once cultivation can reach the effect of several workings of a common plough. 2)this implement mainly works in the sand loam, loam soil, light clay and the dry field with the absolute moisture content of 15%-25%, has multiple functions, as tillage, stubble pulverizing and burying, weeding, turning mud, tamping, ridging, fertilizing and leveling land, and also can be used in the paddy field tillage. 3)1gqn series rotary cultivator is adopted middle gear transmission system, mounted with the tractor of 18-80hp , reliable quality and good performance, safe time and efforts, high quality with low cost.
Our product is well and it's comfortable and convenient in use. 1 cartoon. 1 cartoon = 200 pieces.
Npk complex fertilizer granulation equipment Our npk compound fertilizer granulation equipment is a kind of commonly used fertilizer equipment for producing both organic fertilizers and inorganic fertilizers. Its annual production capacity ranges from 10kt to 500kt. Hence, if you need either organic fertilizer equipment or inorganic fertilizer equipment, please feel free to contact us. Characteristics of npk compound fertilizer granulation equipment 1. Npk compound fertilizer granulation equipment is developed by designers of our company. Applied advanced fertilizer manufacturing technique, this type of fertilizer equipment can finish fertilizer-granulation at one stroke. Its maximum production capacity is 70t/h. 2. Designed based on advanced technologies, our npk compound fertilizer equipment feature energy-conservation, no waste discharge, simple operation, convenient maintenance, and stable operation, etc. 3. Made of high quality corrosion resistant and wearing resistant raw materials, this type of fertilizer equipment has a long service life.
