Wood grapple: 1.Material:made of Q345B (equal to SGC-490 ) 2.Can be either mechanical-driven or hydraulic-driven 3.Can be either rotary or non-rotary. 4.Cylinder's piston are well-protected by steel plate against collision damage. 5.Oil hose are well protected by plastic covering
Grapple : 1.Material:made of Q345B (equal to SGC-490 ) 2.Can be either mechanical-driven or hydraulic-driven 3.Can be either rotary or non-rotary. 4.Cylinder's piston are well-protected by steel plate against collision damage. 5.Oil hose are well protected by plastic covering
Log grab: 1.Made of Q345B(equal to SGC-490 ). 2.Can be either mechanical-driven or hydraulic-driven. 3.Can be either rotary or non-rotary. 4.Cylinder's piston are well-protected by against collision damage. 5.Oil hose are well protected by plastic covering.
high-reach boom and stick: 1.All surface are sand-blasted to ensure the maximum painting adherence. 2.Its spaced out by steel plate inside at short interval for reinforcement purpose. 3.A lifting lug on the top for the convenience of installation. 4.Thickness of the wall vary slightly to suit to different applications. 5.All lubricating pipe ,oil pipe, oil-hose,linkage,pins are provided as standard supply. 6.Can add a middle boom for demolition purpose.
long reach boom and stick: 1.All surface are sand-blasted to ensure the maximum painting adherence. 2.Its spaced out by steel plate inside at short interval for reinforcement purpose. 3.A lifting lug on the top for the convenience of installation. 4.Thickness of the wall vary to suit to different applications. 5.All lubricating pipe ,oil pipe, oil-hose,linkage,pins are provided as standard supply.
long-reach boom and arm: 1.All surface are sand-blasted to ensure the maximum painting adherence. 2.Its spaced out by inside at short interval for reinforcement purpose. 3.A lifting lug on the top for the convenience of installation. 4.Thickness of the wall vary to suit to different applications. 5.All lubricating pipe ,oil pipe, oil-hose,linkage,pins are provided as standard supply.
1.Made of Q345B (equal to SGC-490 ) 2.With guard plate on both sides made of highly wear-resistant. 3.Over-sized steel structure make it very strong and durable. 4.With reinforcement ribs on both sides
Brand: smv Material:50mn/40mn2/40cr Color :black/yellow Finish:smooth Technology:forging /casting Surface hardness:hrc52-60;depth:8-20mm Moq:2 pieces Guarantee:2000hours Payment terms: tt or l/c at sight Delivery time: within 30 days after contract established In strong fugimate wooden pallet
Brand:SMV Material:50Mn Color :Black/Yellow Finish:Smooth Technology:Forging /Casting Surface Hardness:HRC50-54;Depth:4-10mm MOQ:2 Pieces Guarantee:2000hours Payment Terms: TT or L/C at sight Delivery Time: With 30 days from contract established in strong fugimate wooden pallet
1. New shape design, upgrading hydraulic parts, performance sptimization, best price and high quality 2. Configuration korea imported hydraulic parts, odd and even drive a mechanical walking two models of dual-drivehydrostatic you can choose 3. Structure parts are made by full automatic nc boring processing. Precise gap, uniform lubrication, blasting cleaning. Strong paint adhesion. Cab and covering parts are made by electrophoresis processing and increase corrosion resistance 4. Full- automatic welding, weld joints adopts ultrasonic flaw detection, get weld zero defect. 5. The travelling mechanism adopts advanced 4 wheel drive, fast walking speed, best performance, and suitable for working in bad conditions 6. Luxury decoration, streamline cab, expand drive vision, capacious and comfortable operation space, adjustable chair, advance shock system, low noise 7. Strengthen frame and rotary table, can install vibrantility tool, for example, hammer 8. Pass the agricultural machinery appraisal of shandong province Iso9001, weight:6550kg, dimensions:6140*2085*2850mm
With Rops, A/c, Bob Excelent Wring Condition
Just Done 1940 Hours In Excellent Working Condition Ready For Immediate Sale.
10 T Soil Compactorlmot New Done Just 456 Hours Ready For Immediate Dispatch 10t
As per customer's requirement. As per customer's requirement
Condition: used make: caterpillar model number: 320c Year: 2006 place of origin: japan moving type: crawler Bucket capacity: 0.66m3 maximum digging height: 8650mm maximum digging depth: 5860mm Machine weight: 23000kgs colour: yellow condition: good Payment :t/t Location:shanghai Delivery:within a week
Model MGM960 Operation Weight 23500kg Engine Power 175kw Rated Load 20000kg Lift Height 3000mm Length 8400mm Width 2950mm Height 3480mm Wheelbas 3600mm Min.Ground Clearance 460mm Tyre 23.5-25-24PR Drive Type 4WD Fuel tank 300L Hydraulic oil tank 300L Drive speed Forward (1/2) 11.5/36km/h Reverse (1)16km/h Max.gradeability 20 Turning angle 35 Optional equipment 1. Weighing device 2. Cummins engine 6CTA8.3 3. Hangzhou transmission WG180 4. ZF transmission WG200 5. Pilot control 6. Italy tube 7. Air conditioner 8. Luxury seat 9. Tyre protection chain 10. Bucket Remarks: The specification is subject to change without notice. Notes of the equipment working 1. When working, the equipment must be fitted to protection chain. 2. When the rated load is 20t, the largest lifting height should be less than 1.5m. 3. In order to be safe, at the soft surface, slope, steering angle is greater than 10, the heavy load's focus is forward, the load should be limited to 14 tons. 4. Max. gradeability should be less than 20. Powerful performance 1. The turbocharged engine with low oil consumption and high quality, enjoys good performance and strong torque. 2. The planetary power shift transmission and hydraulic torque converter with two turbo have wider high-efficient area, easy control and high reliability. 3. Integral quenching fork is high intensity and more wearable. 4. Enlarged 25t axles have a strong surport capacity. 5. Hydraulic coaxial flow-enlarge style turning system makes operation easy and flexible. 6. Sound/heat isolated and damping ROPS luxury cabin with broad view, MP3 and comfortable seat makes operation more safe and reliable. 7. Double-tube caliper disc brake in four wheels and rear installed brake booster make the operation more safe and reliable.
Model MGM980 Operation Weight 33000kg Engine Power 175kw Rated Load 25000kg Lift Height 3000mm Length 10200mm Width 2900mm Height 3700mm Wheelbase 4200mm Min.Ground Clearance 400mm Tyre 26.5-25-32PR Drive Type 4WD Fuel tank 380L Hydraulic oil tank 380L Drive speed Forward (1/2/3/48/15/23/38km/h Reverse (1/2) 8/15km/h Max.gradeability 20 Turning angle 35 Optional equipment 1. Cummins engine 6CTA8.3 2. Pilot control 3. Italy tube 4. Air conditioner 5. Luxury seat 6. Tyre protection chain 7. Bucket 8. Weighing device Remarks: The specification is subject to change without notice. Notes of the equipment working 1. When working, the equipment must be fitted to protection chain. 2. When the rated load is 25t, the largest lifting height should be less than 1.5m. 3. In order to be safe, at the soft surface, slope, steering angle is greater than 10, the heavy load's focus is forward, the load should be limited to 18 tons. 4. Max. gradeability should be less than 20. Powerful performance 1. National II emission standard engine, matching optimized Torque converter, countershaft gearbox, optimized design of low rotational speed and big peak torque, increase traction force by a large margin, higher efficiency and more Environmental friendly. 2. Application of hydraulic steering system with double pump confluence/shunt load sensing, turning-priority, improve the flexibility and efficiency of the loader operation. 3. 25MPa high pressure design, high quality hydraulic tubes ensure the reliability. 4. Large space cab features completely excellent visibility, provide driving more flexibility and comfortability. High-intensity shock absorption design decrease shock and noise. 5. Adopted safety view video system is more convenient for reversing. 6. Lubricating oil supply equipment saves maintains time.
Model MGM980H Operation Weight 34000kg Engine Power 260HP Cummins Rated Load 30000kg Lift Height 3000mm Length 10300mm Width 3150mm Height 3850mm Wheelbase 4200mm Min.Ground Clearance 450mm Tyre 29.5-25-28PR Drive Type 4WD Fuel tank 380L Hydraulic oil tank 380L Drive speed Forward (1/2/3/4) 8/15/23/38km/h Reverse (1/2) 8/15km/h Max.gradeability 20 Turning angle 35 Optional equipment 1. 29.5R25-L3/TL 2. 29.5R25-L5 3. Tyre protection chain 4. Air conditioner 5. Bucket 6. Weighing device Remarks: The specification is subject to change without notice. Notes of the equipment working 1. When working, the equipment must be fitted to protection chain. 2. When the rated load is 30t, the largest lifting height should be less than 1.5m. 3. In order to be safe, at the soft surface, slope, steering angle is greater than 10, the heavy load's focus is forward, the load should be limited to 20 tons. 4. Max. gradeability should be less than 20. Powerful performance 1. High quality CUMMINS engine, matching caterpillar transmission made in china, optimized design of low rotational speed and big peak torque, increase traction force by a large margin, higher efficiency and more Environmental friendly. 2. Application of hydraulic steering system with double pump confluence/shunt load sensing, turning-priority, improve the flexibility and efficiency of the loader operation. 3. Short Wheelbase Design features small turning radius, ensuring the adaptation of narrow working place, saving working time, with high efficiency. 4. 25MPa high pressure design, high quality Italy hydraulic tubes ensure the reliability. 5. Large space cab with luxury seat features completely excellent visibility, provide driving more flexibility and comfortability. High-intensity shock absorption design decrease shock and noise. 6. Adopted safety view video system is more convenient for reversing. 7. Lubricating oil supply equipment saves maintains time.
We can design and manufacture various bucket for any brands, even can scientifically solve the problem of the stress according to the different working environment or requirements from customers, choose the selected materials, and finish the design by cad, also obtain the integrated quality controlling procedure for welding, so that the hardness of the structure, using capacity and quality can be ensured.The specification covers from 0.1 m3 to 12m3 and so on. Plastic foam
* We are manufacturing carrier pins for 7 ton to 20 Ton class of excavators presently. Larger pins can be manufactured on special request. * We have got special grinding wheels developed to achieve surface finish below 0.2 Ra without investing in a super finishing machine whereby bringing substantial cost benefits to our customer.
