Hello we have the best to offer for Bonny light crude oil from Nigeria and Liquified Natural Gas. We can delivery any quantity you want, If you know this product and you're interested, don't hesitate to contact me as your satisfaction is my priority.
Minimum Quantity: 100,000 Metric Tons @ Trial lift Maximum Quantity: 400,000 Metric Tons @ Monthly Supply PRICE FOB ASWP: GROSS $270/NET $260 PRICE CIF ASWP: GROSS $290/NET $280 Commission: Buyer's Side $5.00 USD / Seller's Side $5.00 USD
Minimum Quantity: 2,000,000 Barrels @ Trial lift Maximum Quantity: 4,000,000 Barrels @ Monthly Supply Price: Gross $80.00USD / $78.00USD Net on FOB Price: Gross $84.00USD / $82.00USD Net on CIF Commission: Buyer's Side $2.00 USD / Seller's Side $2.00 USD
Minimum Quantity: 50,000 MT per Month Maximum Quantity: 400,000 MT per Month FOB Price: Gross USD $ 310.00MT NET / USD $ 300.00MT on FOB CIF Price: USD $ 340.00MT/USD $ 320.00 NET on CIF Commission: Buyer's Side $5.00 USD / Seller's Side $5.00 USD
CONTACT INFORMATION PRODUCT BONNY LIGHT CRUDE OIL (BLCO) QUANTITY Up to 2,000,000 barrels +/- 10% per month for Contract up to 12months with Rolls and Extensions. (monthly delivery based on availability at source) PACKING By Bulk, Vessel delivery. PRICE DISCOUNT ON BRENTT OF -7 Gross 5 Net/ 3 Day Bretttâ??s average on invoice INSPECTION Q&Q test report will be conducted at discharge/purchase port by SGS or Equivalent DELIVERY CIF ROTTERDAM SECURITY Total Cargo SBLC From Top 100 Bank OR Cash for logistics PAYMENT CASH VIA WIRE/MT103 FOR TOTAL CARGO INCOTERMS INCOTERMS 2000 with latest amendments. VESSEL TO BE NOMINATED PRODUCT SPECIFICATION S/N CHARACTERISTICS REQUIIREMENT I Specific Gravity@ 60F/15.55C 0.8397-0.8498 II Apic Specific Gravity@ 60F/15.55C 34.0-37.0 III Density at 60F/15.55C-Cg-CM-MAC 0.85Max IV Pour Point
Capacity : 1.5 ton/hr Grades of Products : All fine and coarse grades of expanded perlite can be produced up to 8mm. Fuel Type : Natural Gas, LNG or Diesel Turn Key : Yes
Tire regenerate of the RShTN type received by a thermomechanical method from automobile tires. Regenerate is available in rolls used for the production of rubber products for various purposes (in the tire industry, production of RTG ). The tire regenerate meets the requirements of TU U 6-25521987.009-2000 "Thermomechanical tire regenerate".
CMM-12R is designed for extension of transformer service life by restoration of dielectric strength and chemical composition of electrical insulation oil. In the process of oil regeneration, decomposition products and acidic compounds are removed, the oil is clarified, its oxidation stability is improved, and gas solvency is reduced. The unique feature of the CMM our units is the ability to regenerate transformer oil directly in a transformer with the transformer either online or offline. The functions of the unit: *Oil regeneration; *Thermal vacuum drying of oil; *Vacuum treatment of transformer; Such regeneration of oil is capable of removing sludge from paper insulation and capturing it with the sorbent. One of the advantages of the regeneration unit is the use of Fuller`s earth sorbent, which can be reactivated many times. This gives the unit the capability to process oil continuously without stops to change saturated sorbent. Even after the sorbent is completely exhausted after 1.5 to 2 years of use, it is completely environmentally safe and can be used as a filler for construction materials and mixes. The CMM 12 our unit is controlled by a computer with special status software. The scanner control system offers the operator full control of all components. The operator can control the equipment, switch to various modes of operation, monitor sensor indications and access event flow. As requested by clients, the CMM-12R can be controlled remotely via the internet. If GlobeCore assistance is required, we can simply connect to the unit through the internet and monitor the entire operation process - if there is a problem, we will see it. Many of our clients purchase equipment for operation in unstable climates, explosive environments and even at sea. The CMM units can be manufactured in various optional designs. The most popular and convenient design is placement of the unit on a one or two axle trailers - this trailer has a metal frame covered with metal sheets and is equipped with an operator room.
OIL INDUSTRY WE ARE DIRECT SELLERS SPARE PARTS. ORIGINAL INDUSTRIAL EQUIPMENT INDUSTRIAL SUPPLY
Product description, including the following details - All hydrocarbon components especially Best grade LNG, BONNY LIGHT CRUDE OIL WITH LOW SULPHUR CONTENT AND JET FUEL A1. a. Name of product - Best grade LNG, BONNY LIGHT CRUDE OIL WITH LOW SULPHUR AND JET FUEL A1. b. Price of product - Jet Fuel A1 $93 PER BBL, BLCO AND LNG ARE NEGOTIABLE. c. Product origin - NIGERIA d. Key Specifications/Special Features - BEST GRADE e. Harmonization System (HS) Code : N/A f. Minimum Order Size : 10000 METRIC TONNES / BBL
TO WHOM IT MAY CONCERN Dear Sirs/Mss We would like to inform you that our partners are ready to supply the following positions of Oil and Gas products. The Ports of delivery can be discussed. Advise the positions you are interested in and what quantities are you willing to purchase by sending a Letter of intent, with the delivery port/ports List of available Oil and Gas products: 1. Aviation kerosene Jet Fuel A1 2. Diesel Gas Oil EN590 10ppm 3. Marina Gas Oil ( DMA/MGO/D6 Virgin Oil) 4. LPG Liquefied Petroleum Gas, Propane/Butane 40/60, 50/50, 70/30 5. Liquefied Natural Gas 6. Crude Oil ( Country of origin on request) 7. Urea N46
Number of passengers 2 Maximum load 200 kg Size 3450*1450*1300mm Net weight 615 kg Engine type 4-stroke twin engine Number of cylinders 4 Displacement 1500CC Compression ratio 9.5:1 Cooling system water cooling Starting System electric start Electrical System Battery :12V, 32A Starter motor: 380W Impeller Stainless steel / 4 pieces Fuel and oil Oil capacity :3.5L * 2 Fuel tank capacity :90 liters Recommended oil,:suitable for engine oil Recommended fuel:Gasoline 93 and above
Product: Diesel En590 10 Ppm Cost of the product with delivery to the destination port
We sell JetA1 in FOB
1. Product and Place of Product Description 2. Typical Characteristic It can be used safely in all seasons in vehicles working with diesel, gasoline and LPG systems. It controls the formation of wear and corrosion, provides maximum protection. It is a motor oil produced by adding high performance additives to high quality base oils. It prevents the formation of deposits and deposits in hot and cold temperatures and keeps the engine clean. It facilitates the first start-up in cold weather and provides effective lubrication in hot weather. It does not decrease, does not decrease in pressure, does not foam even under the heaviest working conditions. Extends the time between oil change periods. It reduces the formation of deposits, keeps the engine clean and increases the combustion efficiency. Thanks to its wide application area, it reduces product diversity in fleets. It can be used safely in all seasons in vehicles working with diesel and gasoline systems. Controls wear and corrosion formation, provides maximum protection. Thanks to the qualified additives, it prevents the formation of sediment and accumulation in hot and cold. It prevents oxidation of oil used for a long time. Viscosity Grade 15W40 Density 15 C g/ml ASTM D-4052 0.87-0,89g/ml Flash Point COC, C ASTM D-92 Min.230 C Kinematic Viscosity 100 C'de mm2/s ASTM D-445 12.5-16.3 mm2/s Viscosity ndex ASTM D2270 Min.110 Pour Point C ASTM D -97 Max.-22 Above values are typical values.
Selling En590 PPM10 PROCEDURE Seller issues full POP ATV & DTA Face to face meeting Pay and inject
ORIGIN ULTRA-LOW DIESEL FUEL EN590 (ULSD) Minimum Quantity: 25,000 Metric Tons per Month Maximum Quantity: 300,000 Metric Tons per Month FOB Price: Gross USD $ 450.00MT NET / USD $ 440.00MT
EN590 (10 PPM) Quantity: Minimum: 50,000 MT. Quantity MIN 50,000MT x 12 months Maximum: 500,000MT CIF Price: $480 Gross FOB Price: $460 Gross Product Description Key Specifications/Special Features - Ultra Low Sulphur Diesel 10 ppm & 50 ppm EN 590:1993 . The first EU diesel fuel specification. It established a sulfur limit of 0.2% and a cetane number of 49 in onroad and nonroad diesel fuels. Sometimes referred to as Euro 1 diesel fuel. EN 590:1996 This standard reflected a new sulfur limit of 500 ppm. We can ship anywhere in the world. Products are ready for delivery in our warehouse. Please contact me/us to get a quick response and proceed with your order and I will try to support you. DELIVERY: The day after confirmed order and confirmation Target Price: Sales will be made at the price you want. you set the price Your Target Price: Negotiable Note CF / LC is ok for us but CiF/ LC should be Mixed Payment Sighy CF/ L/C which means after LC opening you will pay 50% for transportation and handling cost and balance payment after submitting shipment documents to your bank.
we are able to supply Diesel fuel EN 590, in case of interest please provide LOI and BCL containing the name and contact details of the bank officer so that our bank could verify it. For details or other requests please contact our agent
Total Moisture as receive basis, DSTU ISO 579 2002 4,2 Ash dry basis GOST 11022 95, ISO 1171 97 12,1 Total Sulfur dry basis GOST 2059 95, ISO 351 84 0,58 Volatile Matter dry ash free basi GOST 6382 91,ISO 562 81 0,2 Net Calorific Value as receive basis, kcalkg DSTU ISO 1928 2006 6670 Gross Calorific Value dry ash free basis, kcal kg 7983 Phosphorus, P', DSTU 253794 GOST 1932 93 ISO 622 81 0,042 Mechanical strength MA DSTU 2206 93 GOST 5953 93 ISO 556 1980 65,5 Mechanical strength M10, 7,7 Reactivity of coke, CRI, DSTU 4703 2006 27,4 Coke strength after reaction, CSR, 59,8
