Manganese Ore Chemical composition on dry basis Fe: 6.70% SiO2: 8.71% AI2O3: 3.81 % P: 0.11 % Mn: 42,86% We have 540 ton in stock in Belgium and are ready to sell
IRON ORE CONCENTRATE 62% FROM CHILE Our procedures cannot be discussed or disputed as part of our purchases, all means of verification and in particular control by independent control bodies is mandatory. 1) Seller sends Soft Offer to the buyer. 2) If Soft Offer from seller is acceptable, buyer will issue an LOI with all the details + banking information for sellerâ??s approval, and BCL or SWIFT199 3) If LOI from buyer is acceptable, seller will issue an initial draft contract SPA (Sales and Purchase Agreement) for buyer to confirm the order. 4) After contract (SPA) is signed by both seller and buyer then the contract (SPA) will be the official document for buyer to open the RDLC to seller. 5) After RDLC is received at sellerâ??s appointed bank, seller will proceed with production accordingly. The RDLC Issuance Bank and its Parent Organization bank must not be under sanction by USA. Payment term will be RDLC payment after SGS inspection at port of loading. Order Quantity: XXXXXXX mt per month = XXXXXXXX mt. Production capacity is on first come first serve basis. Documents for DLC negotiation: - Original Commercial Invoice. - Original Packing List - Original SGS certificate of Quality and Quantity issued at port of loading. - Original full set 3/3 Clean on Board Bill of Ladings, consigned to RDLC Issuance Bank, and notifies RDLC applicant, marked freight prepaid. - Original Certificate of Origin issued by the Chamber of Commerce and Industry of Chile RDLC Term: By documentary RDLC 100 %, Irrevocable, Confirmed and Transferable, Operative at sight at LOADING PORT via MT 700 Payable within three (3) banking days of buyer's Bank Receiving original shipping documents from seller. Third party shipper acceptable. RDLC transferable by advising bank. Partial shipment not allowed +/- 5% allowance acceptable. Inspection: SGS inspection at port of loading at seller's expense. Goods will be loaded on board of vessel only if SGS inspection is done and passed. The SGS report will be one of the documents for RDLC negotiation. Packing: Bulk on ship
Product is Copper Ore and purity is 30% and above. The prices are negotiable with the buyers. Minimum order is 100 metric tons & up to 6000 metric tons per month. Package are as buyers prefer
Product is Copper Ore and purity is 30% and above. The prices are negotiable with the buyers. Minimum order is 100 metric tons & up to 6000 metric tons per month. Package are as buyers prefer
Mn - 35% SiO2 - 23,9% MgO - 1,31% Al203 - 2,72% CaO - 3,29% K20 - 0,37% P - 0,172% S - 0,04% Fe - 2,25% Moisture 20,1% manganese ore, straight from the producer, possible transport by ship, train, container. Exw price around $ 5.5 /% Mn content
Cr203- 42% Fe0 - 11,95% Mg0 - 22,73% Si02 - 11,11% Al203 - 6,78% Ca0 - 0,07% Ni0 - 0,17% Ti0 - 0,036% High availability, very good quality, price negotiable exw Poland Katowice Possibility of transport by ship, train, container, truck
Recycled, flotation manganese ore contains a little less Mg, but very profitable to buy, 500,000 tons available in big bags, in the form of dry powder or formed brick. Price exw 2 $ /% Mn Mn 25.6% Fe 29.99% Ca 10.52% Si 8.3% Al 3.94% At 2.13% Mg 1.56% K 1.07% Zn 0.57% S 0.39% and other Feel free to contact me, samples available
Pellets are small balls of iron ore used in the production of steel. They are made with technology that uses the powder that is generated during the ore extraction process, once considered waste. The pellets are used in the production of steel which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more.
Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in colour from dark grey, bright yellow, or deep purple to rusty red. The iron itself is usually found in the form of magnetite, hematite, goethite, limonite or siderite. The primary use of iron ore is in the production of iron. Most of the iron produced is then used to make� steel.� Steel� is used to make automobiles, locomotives, ships, beams used in buildings, furniture, paper clips, tools, reinforcing rods for� concrete, bicycles, and thousands of other items.
Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, deep purple, to rusty red. The iron itself is usually found in the form of magnetite (Fe3O4), hematite (Fe2O3), goethite (FeO(OH)), limonite (FeO(OH).n(H2O)) or siderite (FeCO3). Hematite is also known as "natural ore". The name refers to the early years of mining, when certain hematite ores contained 66% iron and could be fed directly into iron making blast
Iron Ore Pellets: Pellets are small balls of iron ore used in the production of steel. They are made with technology that uses the powder that is generated during the ore extraction process, once considered waste. The pellets are used in the production of steel which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more. Product Type: IRON ORE PELLETS Fe (T) 64 % Si02 1.150 % Fe0 0.75 Max Ti02 0.021% Al2O3 0.319 % Ca0 1.170 % P 0.032 % S 0.031 % V205 0.004 % Cu 0.057 % N2O 1.290 % Mg0 0.069 % CCS 309 Size 16-19 mm - 7 % 09-16 mm -91 % 06-09 mm 2 % Tumbler Index- for above 6.3 mm 96.2 % -� 95 % min Abrasion Index â??for 0.5 mm 3.8 % - � 4 % max Sticking Index @950 deg C 20.1 % Bulk Density 2.17 % Compression Strength 270 Kg / Pellet � / � 150 kg / pellet Fines below 5mm (-) 5 mm 3 % max Reducibility index 55-65 %
Product: Copper Ore Origin: CONGO Destination: Worldwide Quantity: 5000 Metric tons per month
We do have DRI / HBI, reduced iron ore briquettes, ready to be shipped Specs: Fe Total (ISO 2597): 90% Fe Metallic (ISO 16878): 84.5% - 85.5% Bulk density: 2.50 - 2.80 g/cm3 Nominal size: 110 x 50 x 30 mm
Current stock has 23-25% Mn concentration, having an SGS and AHK analysis for interested buyers, total quantity of the material is 300.000 tons, FOB Tulcea. We can provide 10-15 k tons per month by vessel or train depending the location.
As an additive to casting sand As metallurgical flux in foundry Protection of molten metal in the crucible In slag control of molten metal in iron and steel industry In forging or preventing heat loss of hot metal ingots going to the rolling mill..PERLITE
We can supply 400 Metric Tonnes of quality Zinc Ore per month. The material is direct from mine (Nigeria) managed via UK partner. Product can be supplied (ex-works or FOB Lagos) to customer's specifications. Typical analysis as follows: Zn: 36.61% Pb: 5.19% Cu: 0.002% Fe: 1.98% S2: 9.45% Reports and other details can be supplied on request.
We deal directly with the Mining company. Grades available: 42~44% and 46~50% Preferably a Trial order of 1000MT and then the possibility of an annual contract.
Copper Ore to Loading port for 700$ mt
Greetings, We currently have 1000 Metric Tones, quality 42%. Also we can provide up to 10,000 tons 36-42& Chrome Ore. Our Chrome Ores have an added advantage over the other similar graded Ores from other producers. The moisture level in our Chrome Ores are of a very low H2O content, often in the -5% level which when utilized or processed in a Steel Mill creates an increase in normal productivity and improved production cost factors. Other than that transportation of low moisture Chrome Ores has itâ??s own advantage of cost saving as well. Price 210$/ Ton (negotiable), Chrome ore 42%. Please let me know if you have any other questions or concerns. Feel free to contact me. Best regards!
TO ALL RESPECTED BUYERS We have at disposal a high content copper ore material with the high Cu content going up to 30% Do not hesitate to contact us for more detailed informations and terms. Delta Sytstem Management