About Meltblown Nonwoven Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �?�µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
About Meltblown Nonwove Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
About Meltblown Nonwoven â?¢ Melt blown is a one step process to make fabrics from polymer. â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid. â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: â?¢ Adjustable Pores And Capillary Structure â?¢ Excellent barrier properties â?¢ Filament size 1 -3 �µm â?¢ High Elasticity â?¢ High Filtration capability â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). â?¢ Large Area-to-weight ratio â?¢ Self-bonding â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. â?¢ Very good thermal insulation for apparel application â?¢ Weak tensile properties â?¢ Wicking Properties Application of spun-bond nonwoven fabrics: â?¢ Sanitary and Hygiene: â?¢ Sanitary napkins, â?¢ Baby diapers and â?¢ Incontinence diapers â?¢ Medical and Surgical: â?¢ Gowns, â?¢ Face masks, â?¢ Caps, â?¢ Drapes, etc â?¢ Other Miscellaneous Applications: â?¢ Filtration Material, â?¢ Agriculture, â?¢ Oilsorbents â?¢ Hot-melt adhesives â?¢ Headliners, etc
Meltblown Nonwoven
PP spunbond nonwoven.Between 8 to 150 gsm ,width 4cm to 1600 cm with any colour. Available to produce with fr and uv. Hygiene, medical,agriculture,geotextile,furniture. Spunlace nonwoven pet,pet viscon,cotton, wet wipes Laminated films with any printed.
Non-woven material obtained by spinning polypropylene microfibers (1-5 microns thick), accompanied by the supply of hot air at high speed. Unlike spunbond, the fibers are whipped and laid directly on the conveyor, without stretching. Meltblown has significant advantages over trradional no ovens. These include greatly increased uniformity, both visual and physical, beter coverage per surface unit, increased or complete water permeability with simultaneous breathability, as well as high filtraaon properes. Meltblown is chaacterized by a significant effect of filtraltraon, absorpon and isolaon. Meltblown is successfully used in filters for respirators, industrial masks, vacuum cleaners, filters for filtering liquids and gases, the prproducon of meal clothing and hygiene products. density: 25 g / m2 BFE>98% BFE>95%
SMMS multilayer nonwovens (layers: spunbond-meltblown-meltblown-spanbond) are made from endless polypropylene yarns that are thermally bonded. - SMMS materials serve as a barrier layer that prevents the penetration of bacteria. - Softer than non-woven spunbond - Excellent moisture retention, but at the same time they have good breathability. - Resistant to tearing and stretching, perfectly retain their shape - Resistant to the spread of microorganisms. SMMS materials are intended for use in the medical industry for the manufacture of operating disposable clothing and underwear. SMMS width: 1.6 m density: 20, 25, 35, 50 g / m2. Also available custum width and color .
Non-woven material obtained from the polymer melt by die-casng using thermal bonding. It is a very light, lint-free, environmentally friendly material. Spanbond perfectly replaces expensive materials, not inferior to them in the thinness of the canvas (while maintaining strength) and breathability. A disnct e feature of the spunbond is its low cost and prpracality compared to tradional m terials. Spanbond, depending on the density, has the widest range of consumpon: fom the use in the manufacture of medical and sanitary products to use as filter materials. width: 1.4-1.6 m density: 25, 35, 40, 50, 60 gr/m2 62/5000 Spanbond width: 1.4-1.6 m
Meltblown Bfe 99
Applications Reverse Osmosis Pre-filtration Municipal Drinking Water Filtration Commercial/Residential Drinking Water Filtration Desalination Pre-filtration
Washable at 95 degrees Celsius. It can be used up to for 10 times by washing. It is antibacterial and has polyurethane coating. Does not contain banned azo dyes, carcinogenic substances and phthalates. Its composition is % 40 PU (Polyurethane) and % 60 PES (Polyester) NV Waterjet nonvowen fabric is used under polyurethane layer. Weight is 85 gr/m2 (plus or minus 5 gr) Thickness is 0.35 mm (plus or minus 0.05 mm) Width is 145 cm (plus or minus 5 cm)
Our melblown is a non-woven textile material made from polypropylene fibers for application in sanitary products, disposable and protective products, etc.
FACTORY IN BULGARIA 15-90 GRCM spunbond Brand Classic Industries GSM 25 Material Polypropylene(PP) Usage/Application Medical, Garments, Agriculture, Construction, Automobile Type of Bonding Mechanical Features Water Proof, Recylable, Dust Resist, Anti Bacteria Packaging Size Customized roll Layer Pattern SS Color White, M.Blue, Green, Yellow, Black, Baize, Orange many others Length customized Width Upto 63' Inches Pattern Plain Do You Fulfill Sample Orders Yes Country of Origin Made in EUROPE Minimum Order Quantity 200 Kg Product Description Spun Bond Hygiene Fabric Medical fabric
Melt-blown non-woven fabric white color, 25gr, 18cm width:normal level/BFE 95/BFE 99
Spunbond non-woven fabric 25g,21cm width skin friendley antialergic
Woven Fabric-%100 Pes- Looks Like Satin
Our meltblown is in accordance with the European norm EN 149 We obtained OEKO TEX certificate for our Meltblown Filter textile produced in Germany (HOHENSTEIN accredited laboratory from Germany) Our Meltblown has been tested at HOHENSTEIN accredited laboratory from Germany and the test reports show BFE Filtration of 99,41% (Bacterial Filtration Efficiency) - 25 gram/m2 With 2 x 25 gram/m2 the PFE (Particle Filtration Efficiency) =
Meltblown 25 g/m2 width 1600mm Meltblown 50 g/m2 width 1600mm
Spun Bond 25g/m2 Spun Bond 50g/m2
SB Lance Quality 25g/m2
