What is a concrete recycling machine? A concrete recycling machine is a machine that processes and breaks down old or leftover concrete into aggregate and other recyclable materials. These machines are used to recycle concrete for use in new construction projects or to clean up job sites. The concrete recycling machine typically includes a crusher to break the concrete into smaller pieces, a feeder to control the flow of material, screens to separate impurities from the reusable aggregate, and conveyors to move the crushed concrete to the sorting and storage areas. It may also include dust suppression systems, remote control and automation and safety features. The recycled concrete can be used as aggregate in new concrete, as well as a base or fill material for other construction projects. The equipment makes it possible to reduce the amount of waste concrete sent to landfills, and instead reusing the material in new construction. There are different types of concrete recycling equipment, including mobile recycling plants that can be transported to different job sites, and stationary recycling facilities that are typically located at a permanent location. The specific features of a concrete recycling equipment will depend on the manufacturer and model.
Materials of Construction Carbon steel St-37 0.6 mm sheet metal Manufacturing Method Press Die Machines Surface Finishing Chrome plated, white or black coated & another colour available on special request.
Spray Plaster This is a bagged gypsum based which could be directly applied on such materials as bricks, concrete, aerated concrete, etc Used indoors. Single layer creates a smooth surface. Not need satin surface finishing plaster Easy usage Economical High strength
CONCRETE BATCHING PLANT MOBILE AND STATIONARY MANUFACTURED BY OUR COMPANY EXPORTED MORE THAN 35 COUNTRIES WORLDWIDE
Length - 2550 mm Height - 2950 mm Capac±ty - 22 m3 Steel sheet width - 4 mm Total Length - 8450 mm 5th Wheel Heihgt - 1200 mm Case - BH450 Steel Sheet Axles and Suspansion: 3x9ton(Local axle),drum brakes, air suspension, front axle lift Brake System: Knorr I-LVL, RSS (ABS function), 71/320 EWG Tyres and R±ms Bridgestone 6+1 385/65 R22,5 , steel rims Hydraulic system: Damper lift is accomplished with P.T.O driven pump and single acting 4 stage telescopic cylinder (180 bar) Paint: After all the metal materials are sanded and primed, the required color is painted according to the customer's request.
Bess PRS-400 Semi-automatic block making machine can produce 4.000 pieces of concrete hollow blocks (20cm width 40cm length 20cm height) or 300 square meters of paving blocks or 1.000 pieces of curbstones. It is just enough to change the mold and the machine can produce 600 different shapes of concrete products. This machine is designed based on European standards and all the parts used in electrical and hydraulic parts are all well-known . Contact us for your own special order and special price. Daily capacity for concrete hollow blocks: 4000 pieces at 8 hours Daily capacity for paving blocks: 300 m2 / At 8 hours Daily capacity for curbstones: 1.000 pieces ( 150 x 700 x 300 ) At 8 hours Required area for installation: 2.500 m2 Installation and operator training course: Free Warranty period: 2 Years
Box Culvert Machine; It produces Concrete Culverts between 800 - 800mm and3000 - 3000mm in minimum 1000mm and maximum 2000mm lengths. Production is made by connecting a single mold in all sizes. Vibration system of the machine is with liquid oil closed circulation system. Automatic lubrication system is activated with machine operation. SKF or FAG bearings resistant to high cycles and heat are used in the vibrator.
Ugur Makina UMA-110 series Mobile Primary Jaw Crusher Unit has been designed to meet the needs of our customers with compact solutions such as hydraulic feet, foldable conveyor and bunker chamber options that provide the advantage of easier installation in a shorter time. With its high capacity and performance, it ensures that all needs are met. The Mobile Primary Jaw Crusher Unit is shipped in accordance with international shipping standards. Technicial Specifications Model: Uur Makina UMA-110 Capacity: 100-300 t/h Feeder type : UMG03 - 2x8kw Bunker Volume: 1 unit - 30 m Crusher Type: 1 unit UMK110 - 132kw Crusher Output Band: 1200x8000 - 11kw Uur Makina UMA-110 Mobile Primary Jaw Crusher Equipment: Primary Jaw Crusher (UMK110) Vibrating Feeder UMG03 Mobile Chassis with axle and tires Hydraulic Feet Folding Type Belt Conveyor Please CALL us for our other Crushing plants and customer-specific solutions
Standard or specially different machinery Capacities per shift between 2.000 to 30.000 pcs Brick output Sample brick insizes 250x120x65mm Solid or hollow Mixing ratio % 100 soil %7 cement and water
Production capacity is between 1200 and 1400 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 600-750 units. manual, semi-automatic and fully automatic preferred fixed machines.
Production capacity is between 1500-1900 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 800-1000 pieces. manual, semi-automatic and fully automatic preferred fixed machines.
Production capacity is between 2000 and 2300 units per hour and it is able to produce paving stone and briquettes in capacities ranging from 1200-1500. manual, semi-automatic and fully automatic preferred fixed machines.
The production capacity is 2600-3000 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 1500-2000 units. manual, semi-automatic and full automatic preferred fixed machines
Hourly production capacities ranging amount capable of producing briquettes 5500-6300 ratchet paving stone production capacities and can vary from 4000-4500 units, are semi-automatic and fully automatic machine preferably constant.
Our mobile designed walking briquette machines are designed in two different types, which press on the concrete or put pressure on a table and leave it on the concrete. NOVAL INC. It produces semi-automatic and fully automatic walking briquette machines capable of producing briquettes with capacities ranging from 1200 to 1400 units per hour. They are able to manufacture briquettes without the need for printing pallets. They only use concrete surfaces with a smooth surface
we make machines that porduce brick, roof tile or ceramic tile
Introduction of SP10N Wall Putty Plaster Spray Machine SP10N Wall Putty Plaster Spray Machine is stirring, pumping, spraying quality putty powder, small machinery, is a kind of sprayer putty sprayer, spray main production at home and abroad and all kinds of decoration putty. Spraying area is 1500 square meter, every day is suitable for home protection, painting, paste on the bottom, etc. Putty coating machine is suitable for spraying material: cement. Thermal insulation mortar, waterproof, fire prevention materials, insulation materials, sound-absorbing materials, putty, paint, white latex, really stone paint, cement, such as water soluble materials, plastic materials, easy spraying 330 m2 per hour, the efficiency increase 25 times Parameter of SP10N Wall Putty Plaster Spray Machine Model SP10N Voltage 220V Power 3kw Displacement volume 13L/min Delivery pressure 30bar Delivery distance 15m Delivery height 15m Length of spraying tube 25m Hopper capacity 50L Feeding mode Blender mixing materials Total weight 90kg Packing Wooden case
Introduction of SP10N Wall Putty Plaster Spray Machine SP10N Wall Putty Plaster Spray Machine is stirring, pumping, spraying quality putty powder, small machinery, is a kind of sprayer putty sprayer, spray main production at home and abroad and all kinds of decoration putty. Spraying area is 1500 square meter, every day is suitable for home protection, painting, paste on the bottom, etc. Putty coating machine is suitable for spraying material: cement. Thermal insulation mortar, waterproof, fire prevention materials, insulation materials, sound-absorbing materials, putty, paint, white latex, really stone paint, cement, such as water soluble materials, plastic materials, easy spraying 330 m2 per hour, the efficiency increase 25 times Parameter of SP10N Wall Putty Plaster Spray Machine Model SP10N Voltage 220V Power 3kw Displacement volume 13L/min Delivery pressure 30bar Delivery distance 15m Delivery height 15m Length of spraying tube 25m Hopper capacity 50L Feeding mode Blender mixing materials Total weight 90kg Packing Wooden case
Introduction of SP10N Wall Putty Plaster Spray Machine SP10N Wall Putty Plaster Spray Machine is stirring, pumping, spraying quality putty powder, small machinery, is a kind of sprayer putty sprayer, spray main production at home and abroad and all kinds of decoration putty. Spraying area is 1500 square meter, every day is suitable for home protection, painting, paste on the bottom, etc. Putty coating machine is suitable for spraying material: cement. Thermal insulation mortar, waterproof, fire prevention materials, insulation materials, sound-absorbing materials, putty, paint, white latex, really stone paint, cement, such as water soluble materials, plastic materials, easy spraying 330 m2 per hour, the efficiency increase 25 times Parameter of SP10N Wall Putty Plaster Spray Machine Model SP10N Voltage 220V Power 3kw Displacement volume 13L/min Delivery pressure 30bar Delivery distance 15m Delivery height 15m Length of spraying tube 25m Hopper capacity 50L Feeding mode Blender mixing materials Total weight 90kg Packing Wooden case
Introduction of SP10N Wall Putty Plaster Spray Machine SP10N Wall Putty Plaster Spray Machine is stirring, pumping, spraying quality putty powder, small machinery, is a kind of sprayer putty sprayer, spray main production at home and abroad and all kinds of decoration putty. Spraying area is 1500 square meter, every day is suitable for home protection, painting, paste on the bottom, etc. Putty coating machine is suitable for spraying material: cement. Thermal insulation mortar, waterproof, fire prevention materials, insulation materials, sound-absorbing materials, putty, paint, white latex, really stone paint, cement, such as water soluble materials, plastic materials, easy spraying 330 m2 per hour, the efficiency increase 25 times Parameter of SP10N Wall Putty Plaster Spray Machine Model SP10N Voltage 220V Power 3kw Displacement volume 13L/min Delivery pressure 30bar Delivery distance 15m Delivery height 15m Length of spraying tube 25m Hopper capacity 50L Feeding mode Blender mixing materials Total weight 90kg Packing Wooden case
