A metallic enamel that has a particular brightness that looks similar to a mirror. It is adhesive and can be used on any material that is not non-stick (Polyethylene, etc..). Ambro-Sol Leafing is designed for indoor/outdoor use to brighten different surfaces and objects such as frames, furniture, iron, vases, mask, cups, medals, Christmas ornaments, etc. It is dry to the touch approximately 30 minutes after use and its completely dry approximately 1 hour after application. It does not provide protection from abrasions. Once applied handle with care.
This primer is designed to be used as the strong base coat to ensure the perfect adhesion of all enamel spray on diffi cult surfaces such as metal alloys and metals. It protects metal surfaces from rust. Also suitable as a fi ller in bodywork car sector for small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. For overcoating are required at least 24/48 hours. After use, it's advisable to spray for 2/3 seconds with the can upside down to avoid the block of the nozzle.
SHRUB COVER It's a formulate that gives high hiding power after just one coat to completely eliminate any stain at all by penetrating deep below the surface and then creating a seal for the prevention of new stains. Suitable for all stains caused by smoke on walls, mildew, and dirt in general. The STAIN COVER covers any stain when applied evenly over the area to be treated. The removal of particularly â??resistantâ?? stains may require repeated application of product always from a distance of 20-30 cm, paying attention to avoid runs. The product dries in 5-8 minutes if applied at a temperature of 20�°C.
Wood stain formulated for deep penetration and long lasting protection. Made for interiors and exteriors, it suitable for protection of wooden products such as fixtures, matchboards, boats, garden furniture, and more. It effectively protects the wood from aggressive atmospheric conditions such as sun and water. It guarantees easy maintenance, even after long periods of time from the original application. It can be painted over or left as clean sheen allowing the natural grains and knots of the wood to be more visible and accentuated.
This paint is designed to be used as the base coat for a fi nishing enamels. It provides a strong base to ensure the perfect adhesion of the enamel spray on difficult surfaces such as plastics and metals. It protects metal surfaces from rust. On cars it covers small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. It dries on touch in roughly 15 minutes and dries fully in roughly 22 hours. For overcoating are required at least 24/48 hours. After use, it;s advisable to spray for 2/3 seconds with the can upside down, to avoid the block of the nozzle.
Sku:V400PAST
546 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
Bituminous tar-based insulating protector, ideal for giving protection from abrasion and stone hits to all those parts of the body that are particularly exposed. Resistant to atmospheric agents. Product suitable for any type of plastic, it does not require a primer. It dries to the touch in about 30 minutes and in depth in 24 hours. Before use, shake the can for at least 2 minutes.
Spray Paint
Designed for numerous application possibilities. Special spray system, which is even used by famous graffiti artists. Available in a broad range of the bestselling colours, mainly matching to RAL.
High-grade nitro-combi quality.
Very good coverage.
Excellent adhesion on many surfaces.
Good flow, smooth surface.
Quickdrying.
Suitable for indoor and outdoor applications.
The surface is polishable.
Weather-resistant, light-proof, UV-resistant.
Scratch-, shock- and impact-resistant.
Quick-drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).
Good quality emulsion paint that provides a very smooth classical matt finishing, a warm shade of white and a good hiding power to conceal wall imperfections.
Ideal for new and renovation coatings on all common surfaces in living and working areas.
Tools: brush, roller or airless.
Packaging: lt 14
A unique product for the face of the skin affected by rosacea, where antibiotic and steroid treatment did not work.
Use in the case of rosacea as well as discoloration and dry skin, damaged from the sun, dust with visible purulent lesions.
It works against bacteria, fungi and brightening. Is a supplement to Titiol Plus. The product contains ingredients that brighten the skin and protect it from external factors under the influence of the sun. Use on the day only. The product contains 12 active ingredients that help regenerate damaged skin. Moisturizes the skin, while changing the changes caused by rosacea.
1K Winstrip KNL400 is a neutral, yet intensive, CHC-free cold paint stripper. Based on organic solvents, it is particularly suitable for removing several layers of paint and varnish in one dip.
Fast-drying primer for heavily used iron structures. The zinc dust primer is suitable for the long-term passivation of iron and steel, even when they are in an aggressive atmosphere.
Size
1 kg
5kg
20kg
The zinc dust primer contains micronized zinc dust and an epoxy ester resin as a binder base. The product has cathodic rust protection properties and also has a sealing effect. The zinc dust primer is suitable for the long-term passivation of iron and steel, even when they are in an aggressive atmosphere. The product can be used on sandblasted steel components and structures as corrosion protection, as well as for steel equipment, pipes and body parts
Winstrip KSG 650 paint stripper paste â??PH 1-2 extremely strongly acidicâ??
KSG 650 is a multifunctional thixotropic cold paint stripper based on solvents.
It is ideal for stripping wood materials.
Also ideal for all types of metals and non-ferrous metals.
Due to its thixotropic properties, it is suitable for vertical or upside down surfaces.
Winstrip-Gel KSG600 is a multifunctional, mild-smelling, ready-to-use, thixotropic cold paint stripper based on special organic solvents and selected corrosion inhibitors
Size
1 litre
5 litres
15 litres
Winstrip-Gel KSG600 is a multifunctional, mild-smelling, ready-to-use, thixotropic cold paint stripper based on special organic solvents and selected corrosion inhibitors. The product quickly and safely removes a wide variety of paint systems, e.g. air-drying epoxy paints, polyurethane paints, NC paints (nitrocellulose paints), acrylic paints, dispersions, wet primers and most conventional paints and corrosion protection primers. Winstrip-Gel KSG600 is ideal for stripping paint and stripping all types of wood and metal, such as aluminum, zinc, iron, etc. It is also suitable for non-ferrous metals such as copper, aluminum, zinc, bronze. The paint stripper is used for spray hooks, engine parts and for vehicles, trucks, car chassis, in boat building and for steel structures, etc. Winstrip-Gel KSG600 is safe to use and hardly drips on vertical surfaces or overhead due to its good thixotropic properties
Highly heat-resistant paint spray up to 800 for painting and protecting parts that are exposed to high temperatures such as exhaust systems, engines, grills and ovens. Quick-drying, weatherproof and petrol-resistant. Suitable as corrosion protection.
Highly heat-resistant paint spray up to 800 for painting and protecting parts that are exposed to high temperatures such as exhaust systems, engines, grills and ovens. Quick-drying, weatherproof and petrol-resistant. Suitable as corrosion protection.
High-quality special paint for painting work on body panels and primed wood, plastic, metal, etc. Polishable, lightfast, non-yellowing, color and gloss stable, quick-drying with very high coverage.
Odorless, acrylic-based primer, antibacterial, antifungal, penetrates deep into the surface, strengthens the outer layer. Reduces paint consumption, as the ability of the surface to absorb paint decreases. Used for painting and puttying.
Per canister 10L
Our Company, Which Offers Special Solutions For Many Sectors With Its Special Formulas, Can Produce Roller Coating And Rubber-silicone Parts.
Our Rollers Used In The Machines Of; Textile, Paper, Iron - Steel, Plastic Metal And Packaging, Printing, Corrugated Cardboard, Tin And Sheet Industry. Rollers Can Be Covered With Rubber, Silicone, Nitrile Coating.
Rubber Coating;
18-98 Shore A, 70 Shore D Hardness
Working In Environments From -60c To +250c
Resistant To Various Environments; Solvent, Acidic & Alkaline
Resistant To Chemicals & Oils In Different Types
Friction, Abrasion, Weariness, Impact & Pressure Resistant
Sectors Used;
Textile
Wood And Furniture
Iron Steel & Galvanized
Printing Press
Mine
Paper
Corrugated Cardboard
