The handysand auto 2 is the latest innovative drywall sander, providing an outstanding working height of 7+ meters. Powerful 750watt motor, pressure release valve, ars technology (auto regulated suction) active on all versions and set ups 25cm*25cm*1m (boxing)
Rapid industrial paints Epoxy finishing paints Rapid finishing paints Solvent based epoxy paints Epoxy primer Rapid primer Epoxy shop primer Self leveling epoxy finishing Road marking paint (with chlorine and rubber resin) Synthetic-based anti-rust Ceiling paints Matte plastic paint with silicone Interior paint with silicone and plastic Exterior paint with silicone Silicone based exterior primer Marley pvc adhesive
High quality lightweight polyester putty for car repairs – latest technology in putties. - Creamy texture. - Very low density. - Extremely easy to mixing and apply. - Exceptional sanding quality. Color - Light Blue. Gloss Grade – Matt. Density – 1,00 kg/l.
Clear coat can be put on: 1. Basic colours, 2. Existing Paintwork in sound condition Existing paintwork should first be dried, abraded and cleaned with a silicone remover. For dulling the colour we recommended the following: - grey unwoven abrasive fabric with dulling paste -abrasive paper with gradiation of 600 to 8000 (for Dulling wet), - abrasive paper with gradation of 360 to 400 (for dulling by machine).
IT 2007 varnish is two component acryic transparent lacquer with low content of volatile components. it is intended to profession use, in the 2:1 system. Hs Varnish creates the hard coat with the brillinat polish and fits for lacquer finishes of cars after all types of repairs. standard packing - 1L and 5L.
This is a special paint with extreme adhesion to glass surfaces. It is sprayed onto any type of glass to produce coloured glass panels.
Acmelight Company is specialized in production of luminous, fluorescent and invisible UV Light +óGé¼+ôclub lighting+óGé¼n++ paints. We produce: 10 types of Glow in the dark paints, 9 different colors. Such paints eliminate the light at the total darkness, without any lightening. As we use high-qualified Holland raw materials as the light-accumulating basis, luminous paints are able to eliminate the light not less than 10 hours. The light energy is accumulated both from the daylight and electrical one. 5 types of fluorescent paints, 7 different colors. These paints are very bright under the daylight, and it eliminates deep volumetric glowing under the UV +óGé¼+ôclub+óGé¼n++ lightening. We have developed out and introduced to production such paints, used not only for textile, flowers and glass, but also for wood, concrete and metal. That is why it opens really unlimited branches of its application. For those, who dreams about being the disco star, we have developed 7 colors of fluorescent nail polishes. 4 types of invisible paints, 3 different colors, glowing in neon lightening. Such paints are completely invisible at the daylight, but it glows deeply under +óGé¼+ôneon+óGé¼n++ light. These paints are good for painting walls in night clubs, laser show halls, bowling clubs. We also produce 3 colors of +óGé¼+ôcolorless+óGé¼n++ nail polishes and invisible paints for paper (for making watermarks), body, self-adhesive film, flowers and etc.
High quality branded paint, comes with full specifications and paperwork, sold in all measures up to 1000lt ibc. 1000lt ibc, weight 1 ton.
Global chrome
This paint, based on acrylic dispersion, is used for covering external facades. It can be used for coating mineral substrates: concrete, cement plasters, and cement-lime plasters that have not been painted before. After polymerisation, it forms a highly weatherproof coating. It protects the painted substrates against water penetration, at the same time enabling moisture and carbon dioxide to penetrate. On the surface, it creates a matt coating of high decorative values and high resistance to abrasion. The paint is produced in white. Paints may be coloured according to the palette of colours, available upon request.
ASPOL B-105 lamb is a ready-to-use, water-diluted, decorative stucco based on acrylic resin and quartz. It is used for making decorative and protective thin-layer coats both indoors and outdoors; it can be used to make insulation systems using the damp method on foamed polystyrene. It gives a (woodworm÷ effect to the applied plaster with 1.5 to 2.5 mm grain size. The texture is created using a stainless steel or PVC long float. Other kinds of decorative plasters available: "woodworm" with 2-3 mm grain size and "mosaic" with coloured aggregate (marble, quartz). All the plasters are produced in white. Plasters may be coloured according to the palette of colours available upon request.
Trench coats Europian standart-38-42
Trench coats -polyester/waterproof/; -colour-black; -good price; Excellent quality. Europian standart-38-42
Plastic interior wall and ceiling paint. Normal, silicon added type 3.5 kg, 10 kg, 20 kg
Pro-Eco Cleaner effectively cleans a wide range of industrial floor types ranging from epoxy, methylmethacrylate, polyurethane, concrete and ceramic tiles leaving floors sparkling, clean and safe.
Dyo epoxy enamel Excellent adhesion and abrasion resistance. High resistance against chemicals, sea-water, mineral oils. Its high thixotropic nature provides it to be applied as thick layer. It resists temperature up to 150 c degrees without change in colour. Packaged in 22 kg can
Dyo pu topcoat fd 2k polyurethane fast drying(fd) alkyd based car repair and vehicle paint. Has gloss, semi gloss, gloss retention, high mechanical and chemical resistance and high flexibility. Has resistance against gasoline, adverse weather conditions, industrial air pollution and salt spray. Packaged in 18 kg can
Dyo hb epoxy primer Excellent adhesion over galvanized surfaces. High resistance against corrosion, hummidity and chemicals. Its high thixotropric nature provides it to be applied as thick layer. It resists temperature up to 150 c degrees without change in colour. Drying speicifications: 8 h at 20 c degrees 50 min. At 80 c degrees 30 min. At 100 c degress 20 min. At 140 c degrees Packaged in 24.5 kg can
Dyo acrylic top coat 2k polyurethane acrylic based car repair paint. Has high gloss, gloss retention, high mechanical and chemical resistance and high flexibility. High resistance against gasoline, adverse weather conditions, industrial air pollution and salt spray. Drying specifications: 8 h at 20 c degrees 30 min. At 60 c degress 7 min. Infrared short wave 10 min. Infrared long wave Packaged in 18 kg can
1 k dyo - pox primer It is used as air drying primer on iron and steel surfaces and also light metals. Air drying syntetic, oven drying topcoat can be applied. Drying specifications: Thorough drying 20 mins. At 20 c degrees Hard drying 72 hours at 20 c degrees Packaged in 22 kg cans.
