Advazorb Plus (T) offers a good standard in hydrophilic foam tracheostomy dressings with high absorbency ability. Manufactured in lightweight, soft and conforming low-adherent foam with high fluid absorbance and retention characteristics. Manufactured with a film backing to ensure improved strength and absorbance for medium/high exuding wounds. Supplied sterile and individually wrapped, ready for use. Available in one convenient size to suit most intubation procedures, and to offer comfort to the patient. Cushioning effect on wound Low adherence -Reduced trauma on removal Highly absorbent 5mm foam Excellent patient comfort Rapid uptake of exudates Can be cut easily to size Available on FP10 Prescription Single patient use only UK Manufactured Latex-Free CE Marked CR/3900 Advazorb Plus Dressing 80x80mm Pack size 20
ADVAZORB (T) LITE TRACHEOSTOMY DRESSING Advazorb (T) Lite is the definitive lightweight hydrophilic slim foam tracheostomy dressing. Advazorb (T) offers remarkable standards of conformability, softness, lightness compared to gauze dressings. Perfect for the treatment of light/medium exuding wounds as moisture is absorbed and retained in the hydrophilic cellular structure. Supplied sterile and individually wrapped, ready for use. Available in one convenient size to suit most intubation procedures, and to offer comfort to the patient. Cushioning effect on wound Low adherence -Reduced trauma on removal Highly absorbent 2.5mm foam Excellent patient comfort Rapid uptake of exudates Available on FP10 Prescription Single patient use only UK Manufactured Latex-Free CE Marked CR/4212 Advazorb Lite Dressing 80x80mm Pack size 20
Advadraw 'T' is a tri-laminate tracheostomy dressing which has a low adherent perforated wound film contact layer, an absorbent centre action and a strike-through resistant layer to seal the dressing. Advadraw 'T' is comprised of an enhanced lighter fibrous material, with tests showing improved absorbency rates when compared to other manufacturers. The slim contours of Advadraw 'T' avoids elevating the tracheostomy tube away from the neck, while the curved edges ensure maximum comfort to the patient. Available in one convenient size to suit most intubation procedures, can be easily trimmed if needed Cushioning effect on wound Low adherence -Reduced trauma on removal Conformable patient protection Suitable for low/medium levels of exudate Rapid uptake of exudates Available on FP10 Prescription Single patient use only UK Manufactured Latex-Free CE Marked CR/4416 Advazorb (T) Dressing 80x80mm Pack size 20
Advazorb Fixation is a post tracheostomy decannulation dressing fitted with a central location button that prevents unwanted escape of air through the wound site with gentle pressure applied during occasions such as talking, coughing and sneezing. Advazorb Fixation comprises of a hydrophilic foam dressing with a unique perforated silicone adhesive wound contact layer. It is an atraumatic foam dressing which does not adhere to moist wounds. The silicone helps maintain a moist wound healing environment and makes it ideal as an adherent wound contact dressing. Soft silicone dressings do not damage newly formed granulating tissue and do not lose their adhesion after initial application. The silicone layer prevents the need for additional dressing or fixation. Silicone adhesive combines security with pain-free dressing changes. Waterproof backing enables the patient to shower without the need to replace or cover the dressing. Supplied sterile and individually wrapped, ready for use Location button enables accurate identification of tracheostomy site Maintains a moist environment and manages exudates Allows atraumatic dressing change Provides a barrier for bacteria Single patient use only UK Manufactured Latex-Free CE Marked CR/4341 Advazorb Fixation 12cmx10cm Pack size 10
Product Features Of Vending Machine: Steel Cabinet,security design,easy for installation and maintenance. Advanced and stable vending technology,with statistics,query,fault diagnosis. This product is mainly applicable to all types of small items. Material: * Large glass window to display goods.( tempered glass , safe and convenient ,display goods explicitly ) * HD Touch Screen,contact sensitive and easy to operate. * Customized card payment, coin payment. * Anti-Theft Lock, the take off port is equipped with a linked anti-theft baffle,which is closed at the same time of pushing. * Open 24 hours, take care of your health all day. Quality Face Mask Vending Machine from Smart Vending Machines Due to the outbreak of COVID-19, everyone has been advised to protect themselves and remain safe. One of the safety tips recommended by the World Health Organization and medical experts is to put on face masks. Especially when outdoors or in public places, wearing a face mask can prevent you from contacting viral infections. To ensure that face masks are made available at the fingertips of individuals and families, Smart Vending Machines developed the face mask vending machine. This vending machine can dispense face masks and other personal hygiene products such as hand sanitizer, disposable gloves, and anti-bacterial tissues. About Our Face Mask Vending Machine Smart Vending Machines is a reliable provider of vending machine service based in Melbourne, Australia. Our company specializes in building custom smart software vending machines. Our face mask vending machine was developed to make it easier for the general public to have access to face masks and personal hygiene products. What's more, our face mask vending machine will ease the process of dispensing face mask, which will help curb the continuous spread of the COVID-19. Asides face masks, the vending machine can also dispense personal hygiene products such as hand sanitizers, disposable gloves, anti-bacterial tissues, and lots more. All these will help keep you safe, especially when outdoors. The face mask vending machine is fully automated. This vending machine offers a relatively safe and easier way to maintain basic personal hygiene and protect yourself against contacting any viral infection. To get a face mask, you can activate the vending machine using your mobile device, email link, credit card, staff RFID card, or QR code. Likewise, we can build the vending machine to use other custom requirements. Hence, since the vending machine can dispense face masks and other hygiene products, residents and businesses in Melbourne, Sydney, Brisbane, Canberra, Adelaide, Perth and Darwin, Australia, can have easy, 24/7 access to any of these items. With this, they can remain safe whenever they are outside. No to wait for long hours at the grocery shop or supermarket just to get a face mask.
Covidien, Abbott, Terumo, BD, Boston Scientific, Ethicon, Medtronic, Beckman Coulter
With a range of 2 metres, and 360 degree coverage, our UV-C Room, Steriliser is able to keep a small room, vehicle cab or specific work area, sterilized. Powered by USB, the use of these products is very versatile Trade Price: starting from £32.00 per unit Minimum Order: 50 units (discounting available from 200 units) RRP: £40.00 (must not be discounted)
This hand-held device runs on AA batteries, and is designed to be used, in the home or work environment to sterilize surfaces. The UV-C, radiation can be safely used on any surface, from screens and, keyboards to clothes and furniture. Depending on how porous the, surface material is, the UV-C will destroy viruses, bacteria, coronavirus, and all other germs in 1 - 10 seconds. Trade Price: starting from £22.00per unit Minimum Order: 50 units (discounting available from 200 units) RRP: £34.00 (must not be discounted)
Ventilators available. This model is FDA and CE approved. Price: 9400$ There are also other models available, to get more info please send me a message.
Invasive ventilators VG 70 are available for order now.
GENERAL FEATURES - Metal parts coated with zinc phosphate and varnished with electrostatic epoxy polyester powder - Easily cleanable, two-piece compact laminate lying surface. - Easy foldable side rails - IV pole inserts and protective bumpers on the two corners of headboard - IV pole and drainage hook - 200 mm diameter castors with a directional lock, central locking system and capable of turning 360 - 5.th Wheel that provides to make easy elicrections on the way - IV pole adjustable with in teleskopik way. - Push bar manufactured from stainless steel - Hydraulic controlled height, trendelenburg and reverse trendelenburg adjustments with foot pedals - Back rest and trendelenburg adjustment cotrolled with gas springs - Hydraulic system designed with aliminiumm coloums - ABS plastic covered lower chassis - Designed ABS plastic to carry Oxygen tube on -Body fixing belt - Mattress with 12 cm thickness suitable for lying surface
GENERAL FEATURES - Side panels and top table made of polypropylene - Durable main frame made of aluminum -360 turning 4 wheels 2 of which has cross lock to stabilize the trolley - Seal system for central locking drawers -Disposal bin made of ABS material - Nurse writing table - Dividable inner drawers - 5 drawers with following dimensions; - 2 pcs 445x545x70mm, -2 pcs 445x545x160mm, - 1 pc 445x545x250mm - Self-closing and telescopic sliding rails for drawers - Height adjustable IV Pole -Oxygen bottle holder made of polypropylene -Resuscitation table made of compact material - 360 turning defibrillator table
Product features: Dispenser capacity: 1 L. Dispensing type: automatic, with the option of changing the dose of disinfectant liquid Housing: steel, powder coated Power supply: Maintenance-free operation of the device on one charge up to 30 days Batteries: LED indicator signaling system operation and LED indicator signaling low battery level Colour: gold-black or white-blue (other RAL colors on request) For use: inside and outside buildings Refilling: from a multipack (any soap or liquid) Dimensions: 1600 x 633 x 433 mm Weight: 25 kg Assembly: a free-standing station, all bolted together, easy assembly and disassembly of the device Closing: rear door lock Regulation: Adjustable foot structure Additional information: light weight allows easy movement of the device with a stable construction Production: Product made in Poland WE ALSO OFFER: Option to choose station color and place your own logo! Hire sale option! Discounts for wholesale orders! Attractive margins for distributors!
Spirotome The spirotome is a large core soft tissue biopsy system for the early detection and diagnosis of diseases, mainly cancer. The procedure is gently with no pain. The sample is of exquisite quality and the price per biopsy low. The procedure can be done in the operation theatre, physicians' office or elsewhere. Due to its direct frontal uptake of tissue the device is ideal for stereotactic procedures but working under ultrasound is the routine. The system works where other systems fail. The system is mri safe and conditional. Fda approval since 2006. Ce approval since 2005. One package contains one set of needles and measures 3 x 6 x 20 cm and weigths maximally 60 gram.
Coramate The coramate is an automated computerized and battery operated large core soft tissue biopsy systems, mainly to be used in the early detection of breast cancer. The working range is between 8 and 12 gauge. The direct frontal uptake of the tissue sample makes this procedure extremely effective in making a complete diagnosis without any patient discomfort. The quality of the sample is exquisite. The costs per biopsy are the lowest compared to the other vacuum aspiration biopsy devices. The unique concept of rotatational cutting on a cutting helix makes this device the first choice for early diagnosis of clinical lesions, ultrasound guidance and mri guidance. The system is ce and fda approved since 2006. More info on: www.Medinvents.Com One package contains a coramate and battery charger and measures 50 x 40 x 10 cm.
The TIVI600 Tissue Viability Imageris intended primarily for skin testing in association with skin care product and drug development. Features Automatic capturing of up to 12 images of the microcirculation per minute. Presentation of high resolution 2D microcirculation colour maps. Statistical image analysis in batch mode. Time compressed review of microvascular events using video-clips. Interaction with other software packages. Small and portable design. Benefits No injections, contrast agents or even skin contact necessary. Instant image capture. Unaffected by movement artifacts and ambient light. Ease-of-use resulting in increased productivity in skin testing. No influence on the microcirculation under study. No calibration necessary. Applications Skin care products, cosmetics and textiles development & evaluation. Skin testing including irritation grading and patch testing. Drug development including use of iontophoresis. Microvascular research.
Medical systems
External defibrillator types defi with&without monitor defi with pulseoximeter 53x44x26 cm /package 9 kg weight
Bayer glucometer esprit
Gas spring (gas struts) Gas springs are used everywhere that weights have to be pushed, lifted, lowered, pulled or set into position Gas springs (gas struts, gas lifts) are applied on vehicles tailgates and bonnets, bus baggage lids and seats, caravan lids, tractor cabins, folding beds, office chairs, roof boxes and many other places according to costumer demands. Costumers are able to choose from our oem or aftermarket products.They can also ask for their specifications. We offer different types of connection parts and brackets for our gas springs Gas springs that are used on buses of mitsubishi, mercedes benz, man, daf, scania, b.M.C. Etc. Midibusses of iveco, isuzu, temsa, etc. And cars of renault, fiat, peugeot, lada, volvo, volkswagen, ford, opel, citroen, audi, bmw. Etc. Are among despa's sortiments
