Si : 0.2-0.6%
Fe : 0.35%
Cu : 0.1%
Mn :0.1%
Mg : 0.45-0.9%
Cr :0.1%
Zn :0.1%
Application:
Aluminum alloy production , Steel making and requirements of the coating is not high
Fireworks production
1.mainly used for melting ingot
2.discontinuous melting with scrap
3.easy control and operation
4.fast melting
5.energy saving This Scrap Aluminium is produced in the production of industrial waste.Such as:Scrap Aluminium Wire,Scrap Aluminium block and so on. We offer the clients with quality Aluminium Scrap that is used in various industries for making new aluminium products. Our range of Aluminium Scraps is free from unwanted content and corrosion resistant in nature thus highly demanded in the domestic.(EL)
Aluminum Content 98% Min
Si% 0.3 max
Fe% 0.7 max
Cu% 0.25 max
Mn% 1.0-1.5
Mg% 0.8-1.3
Cr% 0.1 max
Zn% 0.25 max
Ti % 0.1 max
Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps.
UBC suppliers are not allowed to use steel straps.
The integrity of the bundles must be as safe as they can be stacked for storage, and
bundle height must not exceed 1.50 meter.
UBC briquette does not contain shredded material.
Wooden pallets are not allowed to build the bundles.
The briquette density is required to be in the range of 450kg/m3 to 700kg/m3
The preferred briquette size is: 0.40 x 0.30 x 0.30m and all briquettes should ideally be of uniform
size.
24 bundles ( 1000 kg each)per container 40'HC
Impurities:3% maximum as below:
Moisture 0.7%
Sand 0.6%
Garbage 0.4%
Paper & Vinyl 0.1%
Ash 0.1%
Magnetic Metals 0.5%
Heavy Material 0.5%
Dirt 0.1%
Impurities 3.0%
Non UBC target 3.0%
If the impurities plus moisture is
lower than 3%, there is no claim due to these non UBC.
Radioactive source:None
Fumigation
Pallet
a) Should be treated with Fumigation
b) According to ISPM No.15(International standards for phytosanitary)
We are devoted to making sustainable improvement to offer superior quality products, satisfactory services uninterruptedly for the market and competitive price for the customer. We believe to make you satisfy, is our target forever. Under our efforts, we have already established good business relationship with some domestic and overseas.
Our Goods remain free from Dust Particles, External Coatings, Oil or grease coatings and foreign contamination.
We are capable to supply around 100 MT per week or as per buyers capacity.
In very brief, our specialization and expertise lies in trading all kinds of ferrous and non ferrous scrap, specifically are as follows below:
COPPER WIRE SCRAP 99.9
ALUMINUM EXTRUSION 6063
ALUMINUM UBC CAN SCRAP
BOPP FILM (ROLL) SCRAP
The Compressor Scrap offered by us has good recycle value and are widely in demand. We are offering Compressor Scrap at very reasonable price for the convenience of the customers.
Description
Fridge/AC Compressor Scraps
We sell Fridge/AC Compressor Scraps at a very competitive market price.
Please let us know if you have a target price.
We sell Used Rails, HMS, Steel Scaps, Copper Scraps, Aluminum Scraps, Mill Scales with large quantites and competitive prices, If you have such demand, pls feel free to contact us.
Payment terms TT Only
38148 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
We are suppliers of BEST QUALITY Copper Wire ScrapAnd Looking for serious buyers in need of our products, contact with us for more details.
Copper wire scrap refers to discarded or waste copper wires and cables that are no longer in use and are collected for recycling purposes. These scraps can come from various sources, including industrial processes, construction and demolition sites, electrical and electronic equipment, and more. Copper wire scrap is valuable for recycling because copper is a highly sought-after material due to its excellent electrical conductivity and other useful properties. Here are some key points about copper wire scrap: Collection: Copper wire scrap is collected from various sources where copper wires and cables are no longer needed. This can include old appliances, electronics, discarded wiring, and more. Sorting and Processing: Once collected, the copper wire scrap needs to be sorted and processed. This might involve removing any non-metallic attachments, such as insulation, plastic coatings, or other materials. The goal is to obtain a relatively pure copper material for recycling. Recycling: The sorted copper wire scrap is then typically processed through various recycling methods. One common approach is to chop or shred the scrap into smaller pieces, which are then melted down in furnaces to separate the copper from any remaining impurities or coatings. Refining: After melting, the recovered copper is further refined to ensure its purity. This can involve processes like electrolytic refining, similar to the process used to produce copper cathodes. The result is high-quality copper that can be used for various applications. Applications: The recycled copper obtained from copper wire scrap can be used to produce a wide range of copper-based products. These include new wires and cables, plumbing pipes, electrical components, and more. The recycled copper retains its excellent electrical and thermal conductivity properties, making it valuable for industries that require such characteristics.
Get the best deals on ALUMINIUM UBC (USED BEVERAGES CANS) SCRAP with West Metal Company. We provide premium quality scrap metal at competitive prices with
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Bacoban DL
Alcohol-free disinfection and cleaning of medical fittings and equipment and other surfaces (in accordance with Directive 93/42/EEC: MDD). The product conforms to British Standards under ISO standards DIN EN ISO 13485:2010; DIN EN ISO 9001:2008; DIN EN ISO 10993-1; DIN EN ISO 14971:2007; and EN 14885.
Bacoban is a disinfectant product produced in Germany by Ropimex R Opel GmbH. Its certifications are under the Disinfectants Commission in the Association for Applied Hygiene (VAH) in collaboration with the Scientific Societies and Professional Associations DGHM, DGKH, GHUP, BVÃ?GD and BDH tested according to the DGHM Standard Methods for Testing Chemical Disinfection Processes and deemed to be effective for prophylactic disinfection and hygienic handwash. Does not contain Aldehyde or Phenol. Microbiological effectiveness Bacoban DL is effective against: bacteria, fungi, viruses (hepatitis B and C, HIV, influenza including H5N1and H1N1, Rotaviruses and adenoviruses), and as listed on the page 'Infections that Bacoban kills'
Metal tin is mainly used in the manufacture of alloys.
Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment.
Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials.
Standard
ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 ,
Content
Pb â?¥ 99.99 %
Density
11.34 g / cm 2
Color
Bluish
Weight
35 kgs / lump, 55 kgs / lump
Dimension
21" x 4" x 2.5"
Package
Standard Sea-worthy package, fixed by belt per ton
Shape
Rectangular Lump
Application
lead-acid storage batteries
Ammunition, cable sheathing, and building construction materials
counterweights, battery clamps
cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil
11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
Oxalic acid is a naturally occurring organic compound with the chemical formula H2C2O4. It can be found in various plant sources, such as rhubarb, spinach, and certain nuts
Sodium gluconate is a sodium salt of gluconic acid, a compound derived from glucose, and is often used in various industrial and pharmaceutical applications. It is a white, odorless powder that is highly soluble in water. Sodium gluconate is valued for its chelating properties, which means it can bind to and stabilize metal ions, making it a common ingredient in cleaning products, detergents, and industrial descaling agents. Additionally, it is used in the food industry as a food additive and sequestrant to control the texture and acidity of products. Furthermore, sodium gluconate is employed in medicine as a drug or supplement and has applications in construction as a water-reducing agent in concrete admixtures due to its ability to improve the workability and strength of concrete mixtures.
Acetic acid, commonly found in vinegar, is a colorless organic acid with a sharp, pungent odor and a sour taste. It is a crucial component in vinegar production, where it is formed through the fermentation of ethanol by acetic acid bacteria. Acetic acid is widely used in the food industry as a flavor enhancer and preservative, as well as in household cleaning products. It also has industrial applications in the manufacture of various chemicals and plastics. Its distinctive taste and versatile properties make acetic acid a fundamental ingredient in both culinary and industrial processes.
Alum, also known as aluminum sulfate, is a chemical compound with the formula Al2(SO4)3. It is widely recognized for its versatile applications in various industries. Alum is commonly used as a coagulant in water treatment processes to clarify turbid water by removing suspended particles. Additionally, it has a history of use in pickling to crisp fruits and vegetables and as an ingredient in baking powder for leavening. Alum also finds use in cosmetics, textiles, and as a mordant in dyeing processes. Its astringent properties have made it a traditional remedy for various skin conditions. Overall, alum's ability to form solid precipitates and its diverse range of applications make it a valuable chemical compound in both industrial and household settings.
38148 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
