Find Verified Industrial And Automotive Suppliers, Manufacturers and Wholesalers

Second Quality Railway Steel HMS2 R50/R65 CODE 730 210 000 000

The rails are brand new and only called used rails because of their anomalous sizes. The rails are cut in different sizes, as they did not pass the test of conformity of measurements due to inequalities. Therefore, rails are not suitable as railway track, but not classified as scrap.
we can also provied :
rebar steel
hot rolled steel sheets
Galvanized steel
billet steel
cold steel Rolled sheets



procedure :


1/ Buyer send LOI to the seller. LOI must be from the end buyer and indicates inside the payment method chosen below.

2/Seller issues FCO (available 7 days)

3/Buyer signs FCO and accepts fees proforma invoice indicates all the transaction details agreed after in the SPA and it's the document needed by buyer when start the processus for issuing the deal.

4/Buyer pays fees 1340 $ per ONE million ton to the seller to issu a commercial invoice, please note this amount is refundable after acceptance of the LC by the seller's bank.

5/Paiement terms :

By issuing a confirmed LC MT 700 with full amount (confirmed, not delay and irrevocable), as per the proforma invoice�¢??s terms and conditions by the buyer.

or issuing a revolving LC MT 760 with the bank guarantee to take all the quantity states on the proforma invoice has to be not less than 20 % of the value of the proforma invoice.

Possibility to negociate with DLC.

6/ Seller issues a SPA the buyer must be returned ywith 7 days.

7/ in case of requesting any documents, inspection certificate, etc. property rights, inspection of the goods, requesting a visit or video, the buyer can claim them by sending pre-advice bank draft MT 705, OR among the conditions of the letter of bank credit, confirmed bank, with the full value of the proforma invoice and its conditions

We can tailor drum sizes to meet your specific requirements and use case.

* From 12 litre (3 gallon) up to 160 litres (42 gallon) capacity.
* Tight Head, Open Head, Composite options available.
* Thicknesses according to specification.
* UN Solid and Liquid ratings available.
* Plain or internally lacquered with epoxy, phenolic etc.
* Stainless Steel Options also available.

Tight Head or Open Head Steel Drums Available and can be customised to meet your requirements.

* Tight Head drums have a triple seam construction (7 layers of steel) with a vertical seam electrically welded.
* Superior vacuum resistance.
* Open Head drums have completely removable lids and a triple seam safety factor with several locking band alternatives.
* Many large steel drums can be reconditioned and reused several times before being recycled.
* Fully customisable size 55+ gallons (208+ nominal litres), lined, various closures and fittings available.
* Various colour and product decoration options are also available.

Drained Copper Compressor â?? Fridges/AC (RAINS per ISRI Specifications). Our copper content on 99.97 % Fridge/AC Compressor Scraps We sell Fridge/AC Compressor Scraps at a very competitive market price.

We are trading in the finest quality Metal Scrap/ Aluminium Scrap, which are recycled for producing pure copper products and equipment.We offer quality AC and Fridge Compressor Scrap,Electric Motor scrap with 100% Copper Scrap,Starters, Alternators, Generators and other Motor scraps.

Item Value
Place of Origin UK
Brand Name Copper Wire Scrap
Model Number CS11945
Type Copper Wire
Copper Content 99%
MOQ 100 Tons
Appearance Red color
Cu Content (%) 99.998%
Purity High Purity

Copper Wire Scrap mill-berry

We could supply the copper scrap with high quality and competitive price.� 
1) Our copper scrap includes wires, tubes, and plates, etc.
2)The size is chips or other.
3) Copper content could� meet� customers need.
Application:
Electrical, light industry, machinery,national defense� industry� .
Copper Scrap is industry a important sources of the raw materials,� all kinds of can be recycled Recycling waste production with copper

Specifications
Drained Copper Compressor â?? Fridges/AC RAINS per ISRI Specifications
Our copper content on
Monthly Supply Capacity
Type: Fridges, AC.
Packaging Detail:�  Wood Pallets According to ISRI Specification in Containers
Quantity: Between�  per month
Minimum Order acceptable

What do seal units look like? They are usually found in a heavy container that is typically made of steel and encases electric motors. Compressors and sealed units are found in home appliances, such as fridges, washing machines, dishwashers as well as in cars and heavy industry equipment. They have various metal materials, copper in particular, and are suitable for recovery and recycling.

Stainless Steel Round Bar Grades: 303, 304, 316, 310, 420, 430, 204CU. We provide unique cutting solutions that are customized to suit the particular requirements of your project. Our products are exported to various countries which are mostly located in Europe, Caucasus, and the Middle East region. For any project requirements, please contact us through our email address:

Stainless Steel Sheet Grades: 304, 316, 310, 430. We provide unique cutting solutions that are customized to suit the particular requirements of your project. Our products are exported to various countries which are mostly located in Europe, Caucasus, and the Middle East region. For any project requirements, please contact us through our email address:

Stainless Steel Hexagonal Bar Grades: 303, 304, 316. We provide unique cutting solutions that are customized to suit the particular requirements of your project. Our products are exported to various countries which are mostly located in Europe, Caucasus, and the Middle East region. For any project requirements, please contact us through our email address:

Stainless Steel Angle Bar Grades: 304 and 316. We provide unique cutting solutions that are customized to suit the particular requirements of your project. Our products are exported to various countries which are mostly located in Europe, Caucasus, and the Middle East region. For any project requirements, please contact us through our email address:

Stainless Steel Square Bar Grades: 304 and 316. We provide unique cutting solutions that are customized to suit the particular requirements of your project. Our products are exported to various countries which are mostly located in Europe, Caucasus, and the Middle East region. For any project requirements, please contact us through our email address:

Stainless Steel Profile Grades: 304 and 316. We provide unique cutting solutions that are customized to suit the particular requirements of your project. Our products are exported to various countries which are mostly located in Europe, Caucasus, and the Middle East region. For any project requirements, please contact us through our email address:

Stainless Steel Pipe Grades: 304 and 316.We provide unique cutting solutions that are customized to suit the particular requirements of your project. Our products are exported to various countries which are mostly located in Europe, Caucasus, and the Middle East region. For any project requirements, please contact us through our email address:

Stainless Steel Flat Bar Grades: 304 and 316. We provide unique cutting solutions that are customized to suit the particular requirements of your project. Our products are exported to various countries which are mostly located in Europe, Caucasus, and the Middle East region. For any project requirements, please contact us through our email address:

We supply our product with the best price.
Experience business with us and see the result yourself.

A wide selection of rails wholesale at favorable prices

We have the following rails in our assortment:
- Railway R43, R50, R60 , R65 (GOST 7173-54 and GOST R51685-2000)
- Narrow-gauge P8, P11, P18, P24 (GOST6368-82 and DSTU 3799-98) and European analogues S10, S24, S18
- Mines R33 (TU 14-2R-383-2004), R34, R38 (GOST 7173-54)
- Cranes KR70, KR80, KR100, KR120 (GOST 4121-96)
- Trams LK1, 62R1, 62R2

There is a selection of new, lying and used rails with minimal wear.

We also have accessories for rails:
- Wooden and reinforced concrete railway sleepers
- Arrow translations
- Reinforced concrete transfer bar
- Overlays on rails
- Rail linings
- Road bolts
- Road nuts
- Spring track washer
- PC intermediate terminal
- Road crutch
- Track screws
- Gaskets railway HTV
- Rail fasteners for the crane
- Joint insulation for rails
- Railway counter-theft
- Road tools - tools with which the road is mounted

Aluminium UBC (Cans)
Price USD 1400 per MTon CIF
Trial order: 3.000 MT
Quantity up to 40.000 MTon/Month x 12 month contract
Origin Africa
Payment Terms: 100% SBLC/DLC at the discharge port after the buyer checks, or DLC Usance 90 days;
You can contact me by email or WhatsApp for any information and we will be happy to answer you, we prefer to accept direct serious buyers or mandatory agent with official LOI from buyers, thank you.

Stainless steel tubes for construction AISI 304 mirror finish, 600 grit or higher per request
The price is for OD40 x 1.5mm L6000mm
We have all usual diameters in inventory

Stainless Steel Tube Round OD 40mm thickness 1.5mm L6000mm, mirror finish grit 600
We have all usual diameters and colors (pvd coated)