Bobst Domino 110 Carton gluer Bobst Domino 110 Carton gluer picture Bobst Domino 110 - Carton Gluer For Production of Straight line, Crash Lock Cartons Mfg: 1992 Max blank width: 1100 mm Min blank width: 126 mm - Vibrator on Feeder - Pre Breaker - Lock bottom Station - Vibrator at feeder - Side Glue Tank - Electronic Glue System - Final Fold Section - Counter & Kicker - Pneumatic controlled pressing station * All machine or equipment is offered as is where is with all faults without warranty and is subject to prior sales. * All information provided in this offer is from the source(s), which is/are deemed reliable and trusted.
Paper Cutting Width: 1500-3000 mm Minimum Paper Cutting Width: 40 mm Number of Paper Cutting Blades: 15 pieces Maximum Cutting Speed: 400 m/min
Number of Layers: 5 to 30 Layer Cutting System: Multi Knife or Opposing Knife (with Sew Eurodrive servo motor) Minimum Cutting Length: 50 mm Maximum Cutting Length: 6000 mm Minimum Diameter: 10 mm Maximum Diameter: 600 mm Maximum Wall Thickness: 15 mm
Semiautomatic filling machine stainless steel made, mounted on wheels. The unit has limited overall dimensions. â?¢ Linear filler with 2, 4 or 6 filling valves for gravity filling of all flat products as wine, spirits, juices, water... â?¢ Filling valves with diam. 15mm (smaller or larger valves are available on demand for special use) Simple adjustment of the filling levels inside the bottle by means of quick-insertion spacers Pneumatic bottle seats lifting with height adjustment to fit different bottles. The up / down timing of the bottle seats can be adjusted according to the volume of the bottle, by means of timers: This system allows to adjust the filling timing, once the bottles are filled up the bottle-seats are lowering down. The time can be reduced when filling small bottles, to increase the production output. Product infeed with electric valve in stainless steel controlled by measuring probes. Electrical control panel predisposed for controlling the pump for the product. Controls and protection, all complying with EEC regulations. Possibility to fill glass bottles from 0,375 to 1,5 litres (bottles samples to be provided for confirmation) Supply: electric power and compressed air. OUTPUT : approx 600 x 75cl bottles/hour
Semiautomatic filling machine for Bag-in-Box can fill bag sizes starting from 2 to 20 liters. It is designed to fill foodstuff or other kind of liquid and semi-dense products (eg. wine, oil up to a maximum viscosity of 300 cps). Is possible to make hot-fill temperatures up to 45�?�° with a pump 80 lt/min. Dosing is made with electronic flow meter. The machine is equipped with: * a control panel which manages the filling volume, the vacuum time, nitrogen time, to start the filler cleaning and also can be stored ormats customized according to your needs, finally giving a statistic of the work performed. * vacuum switch with which is possible to realize the control faulty bags; * an inclined surface adjustable with rollers (or smooth surface) to help the descent of the bag into the box; * stainless steel frame on pivoting wheels, two of them with brake; * surface adjustable in height for boxes placement; * a system for nitrogen injection. BOTTLING HOUR CAPACITY : Capacity Output 3 lt...................160/180 bb/hour 5 lt.................. 130/150 bb/hour 10 lt.................110/130 bb/hour 15 lt...................90/110 bb/hour 20 lt...................80/100 bb/hour
Sheeter, Overhauled Manufacturer : Cavalleri Model : CT14 Manufacturing year : 2000 Overhauled : April 2023 Material to be handled Paper, Tissue, Wrapping paper, Plastic materials, PP, PE, Self-adhesive paper, Silicone paper Weight of the material Technical data (Unwinder) Maximum web width : 1200 mm Maximum diameter 1020 mm Maximum web weight : 1000 kg/each shaft Core diameter : TBA -To be advised Two (2) unwinders are available (Format Size) Minimum length : 250 mm Maximum length : 1010 mm - Nominal max.cutting speed : 130m/min. - Photocell for registered mark on the printed material - Antistatic bar equipped All machine or equipment is offered as is where is with all faults without warranty and is subject to prior sales. All information provided in this offer is from the source(s), which is/are deemed reliable and trusted. Ex.Works, excluding VAT, insurance, dismantling, packing and delivery.
Reference FH-43 CATEGORY Converting Equipment Manufacturer Gutenberg MODEL FH-43 SIZE 2450x1700 mm. YEAR 2021 Availability 2021-09-22 Description: This machine is especially suitable for being applied in shopping bags. A Paper bag handle making machine is applied to produce many types of paper bags with flat handles, such as food paper bags, shopping bags and so on. Technical Data Handle Width (T) : 12/15 mm Handle Height (H) : 100 mm Handle Distance (D) : 108 mm Paper Sheet Width (W) : 40 mm Paper Sheet Length (L) : 152/190 mm Paper Sheet Weight : 80-140 g/m2 Paper Bag Width : 250-450 mm Paper Bag Height : 250-450 mm Bag Blank Mouth Width : =130 mm Machine Speed : 33-43 pcs/min Gluing System : Hot Gluing System Machine Supply : 380V, 50Hz, 3 phase, 4 wires Power : 12.2 KW Dimension : L 7000 x W 2450 x H 1700 mm Working Condition Power : 3 Phases, 380V ±10%, 50 Hz Compressed Air : Pressure: 0.6 MPa | Oil and Humidity: 8 mg/m3 Installation Height: Max. altitude: 1500 mm Ambient Requirement: Relative Moisture: Max. 65% when 40 C | Temperature Range: 10~40 C
Fly Fiber Laser Marking Engraving Machine CATEGORY Miscellaneous MANUFACTURER Gutenberg MODEL FG-30/50/100F SIZE 420x130 mm. YEAR 2021 AVAILABILITY 2021-10-15 DESCRIPTION: Flying Fiber Marking Machine is especially suitable for users requiring mass production and marking in food packaging, pharmaceutical packaging, cigarette code, wine industry, mineral water, daily cosmetics, wires and cables and various production lines. Using imported fiber laser and customized marking conveyor belt can achieve the goal of rapid marking, and increase the processing capacity per unit time, improve the benefit conversion rate. Advantages 1. On-line flying optical fiber marking machine can realize the marking work of large-scale production line. It adopts a special split structure. The laser head has the function of automatic induction. When the work piece passes through the laser head, it will automatically mark. 2. Optional high-quality conveyor belts can be selected for on-line flying optical fiber marking machine to meet the needs of various users. 3. Convenient bracket can adjust the distance between upper and lower conveniently, meet the marking requirements of different work pieces, one machine is multi-purpose. 4. On-line flying optical fiber marking machine adopts imported optical fiber laser, which is of good quality and can be processed stably for 24 hours continuously. 5. High photoelectric conversion rate, zero consumables. 6. Simple operation, the operator can skillfully start in one day. 7. Online Flying Fiber Marker supports 2D coding and supports any computer operating system and languages.
Portable Fiber Laser For Big Size - Metal Marking And Etching CATEGORY : Miscellaneous MANUFACTURER : Gutenberg MODEL : FG-20/30/50H SIZE : 200x500 mm. YEAR : 2021 * Portable Fiber Laser Etching machine adopts the third generation solid-state fiber laser to create the superfine effect of marking. This model is a small compact structure, with no pollution, no optical power coupling loss, air-cooling, high efficiency, and stability. The software is easy to use and can work with any content such as graphics, charters, letters, barcodes, QR codes, etc. It can widely be used in various metal and some non-metallic surfaces to create a permanent mark. Advantages 1. Compact and portable: this laser marker with small size, light weight, laser marking machine is easy to carry, galvanometer can be rotated 90 degrees according to the requirements, this laser marker is suitable for side marking and pipeline work. 2. Desktop and handheld design: this laser marking machine with removable fixed bracket, to meet a variety of marking needs. 3. Fixed automatic focusing bracket: the laser-marking machine adopts fixed automatic focusing bracket, and the laser marker is flexible and convenient to use. 4. Laser beam stabilization: laser stability, small loss, free from the outside dust and mechanical impact, laser marker beam stability. 5. The laser marker is maintenance-free, no supplies, and no need to adjust or clean the lens. 6. The laser marker processing speed is 2-3 times of the traditional laser-marking machine. 7. The spot quality of laser marker is excellent and the peak power is high, and the best marking effect can be achieved in the same material. 8. Using automatic lift platform, integrated air-cooled system, integrated design; the appearance of laser marker is simple and beautiful
Category Converting Equipment Manufacturer Gutenberg MODEL PP-140 SIZE 1500x1880 mm. YEAR 2021 Availability 2021-09-23 DESCRIPTION: Can product different size product automatically, rate of finished products 100%. Ideal equipment to produce various specifications of paper plates, that can make square, round, and other shaped paper plates. It makes machine faster running; environmental protection and energy saving compared with the common cylinder. Features The Speed : It adopts fast oil pressure system, each station is 15-20pcs/min faster More Automatic : Machine with automatic counting system, automatic collecting system, which saves half labor cost. Controlling Pollution : Hydraulic oil recycling, reduce emission pollution and noise. The Waste paper : Mechanical paper feeding way, makes more stable in machine running, it reduced the paper wastage rate to 1/1000 in paper drop situation. The Connection : It can be directly connect with packaging machine, labeling machine, suit for produce line working. Technical Data Diameter of Paper Dish : 4-15 Raw Material : 100- 800g/m2 (original paper, white paperboard, white cardboard, aluminum foil or others) Capacity : Double stations 80-140 pcs/min Power Source : 380V 50HZ Total Power : 8KW Weight : 1400KG Machine Dimension : 4000 x 1500 x 1880 mm Air source : Working Pressure: 0.4Mpa | Working air volume: 0.3m3/min Other size can be customized by changing molds
REFERENCE TSWS2 CATEGORY Converting Equipment MANUFACTURER Gutenberg MODEL TSWS2 DESCRIPTION: This machine is applied to rewind the finished round rope. This is a good machine for rewind many small paper rolls coming from Paper Rope Machine into one bigger paper roll with 3500 to 5000 meters longer. In this way, the big paper roll is convenient to be put on Paper Handle machine to make handles. Bigger and longer paper roll means continuous and non-stop production and high efficiency and raise the quality and reduce the defectives. It is a very good supporting machine for Paper Handle Making Machine. High Speed Low Cost Save material Easy to use and maintain Technical Data Core Diameter of Raw Rope Roll: 76 mm Core Diameter of Final Rope Roll: 180 mm Final Rope Reel Diameter: 400-500 mm Max. Production Speed: 80-150 M/min Machine supply: 380V, 50Hz, 3 phases, 4 wires Power: 2.2 KW Weight: 150 KGS Dimension: L 1050 x W 800 x H 1200 mm
Reference RB-50 CATEGORY Converting Equipment MANUFACTURER Gutenberg MODEL RB-50 SIZE 1560x1800 mm. YEAR 2021 AVAILABILITY 2021-09-23 DESCRIPTION: An automatic environmental machine with multi-running positions. This machine runs a whole procedure of paper-feeding, cup-fan-wall sealing, oil silicon lubrication, bottom punching, heating, rolling, rimming, rounding and cup discharge itself. Ideal for: Soup bowls, noodles bows... Features The Tube & Channel: Rectangle tube and channel steel welding structure makes the machine much stronger and reduce deformation. The Sealing: The cup bottom adopts the stretching die which ensure better bottom sealing quality and less leaking. The Control System: PLC control system with screen provide easy operation and accurate control. The Lubrication: The lubrication system for whole machine ensures smooth working for machine. Less stop and faster speed. Electronic Component PLC : Delta Touch Screen : Inovance Frequency Converter : Delta Relay : Omron (Japan) Stepping Motor : Mige Low-voltage Apparatus : CHNT Button : Autonics (Korea) Temperature Controller : Autonics (Korea) Bearing : NSK (Japan) Hot Air : China Brand Transducer : Autonics (Korea) Solid-State Relay : Autonics (Korea) Photoelectric Switch : Autonics (Korea) Main Motor : Zhibao This List only supplies the reference, please take the actual product as the standard
Category Converting Equipment Manufacturer Heidelberg MODEL SBDP SIZE 900x640 mm. Specifications: Automatic ink control Remote ink control
CATEGORY Converting Equipment MANUFACTURER Gutenberg MODEL MB-1400 SL SIZE 2400x1800 mm YEAR : 2021 DESCRIPTION: The slitting machine can cut the paper roll into the specified size paper roll. Technical Data Max. Paper Cutting Width: 1400 mm Max. Paper Roll Diameter : 1500 mm Max. Rewinding Roller Diameter: 400 mm Machine Max. Speed: 450 m/min Max. Slitting Speed: 400 m/min Tolerance Slitting Width: =±0.15 mm Min. Slitting Width: 30 mm Power Supply: AC 380V, 50HZ, 3 phases, 4 wires Rated Power: 33 kw Machine Dimension: L 3800 x W 2400 x H 1800 mm Machine Weight: About 5000 kg Parameters Power: 3 Phases, 380V ±10%, 50 Hz Compressed Air: Pressure: 0.6 MPa | Oil and Humidity: 8 mg/m3 Installation Height: Max. altitude: 1500 m Ambient Requirement: Relative Moisture: Max. 65% when 40 C | Temperature Range: 10~40 C
Category Miscellaneous Manufacturer Gutenberg MODEL FG-20/30/50T SIZE 650x1400 mm. YEAR 2021 Laser ring engraving machine is a new generation laser marking system developed with the world's most advanced laser. Jewelry laser marking electromechanical light conversion efficiency is extremely high with high reliability. The laser ring engraving machines overall size is small. Advantages 1. Laser ring engraving machine can work continuously for 24 hours without consumables. More than 10,000 hours service time can meet long-term and stable work requirements. 2. Gold laser marking machine equipped with special rotary system to support mark on ring. 3. Laser ring engraving machine powerful software compatible with Coreldraw, AutoCAD, Photoshop and other software files. 4. The gold laser marking machine structure has been greatly improved: the optical system adopts a fully sealed structure with a red light preview function, a more beautiful appearance and a more convenient operation. 5. The photoelectric conversion efficiency is high, the beam quality is good, the lines are fine, the spot is small, and the laser has long service life. 6. The laser ring engraving is equipped with the latest precision constant temperature chiller, low operating noise and high temperature adjustment accuracy. 7. Jewellery laser marking machine high-speed scanning galvanometer, suitable for industrial mass production. No mechanical stress, small thermal stress, no damage to the processed material, no deformation. To maintain your best jewelry effect
Category Miscellaneous Manufacturer Gutenpack MODEL FC-50G Availability immediately DESCRIPTION: lasers offer consistent, high-quality marking on many types of materials on the production line, including plastics, ceramics, rubber, paper and fiber products. CO2 laser marking systems are designed for easy integration into production lines and automation cells with their sturdy cabinets, rotating marking heads, and internet-ready controls. Advantages 1. High precision and fast speed. Marking depth is controllable optionally. 2. Wide application. It can mark most non-metals. 3. No consumption and pollution. 4. The marking lines are clear, it can withstand heavy wearing. 5. English software. The software works in Windows environment and it is compatible with many file formats, for instance, PLT, PCW, DXF, BMP and others saved by CORELDRAW, AUTOCAD, PHOTOSHOP and other software. Meanwhile, SHX and TTF can be imported into the software directly. Marking and Engraving FC-50G is suitable for laser marking and surface-engraving. This laser machines apply precise, permanent and abrasion-proof marks on nearly every material by Annealing, Color Change/Frothing, Color/Material Removal, Carbonizing or Surface-engraving. CO2 laser marking machine adopts CO2 RF laser and high-speed scanning galvanometer system imported from the United States. It is equipped with high quality optical devices, high stability laser power supply and automatic control system
Category Miscellaneous Manufacturer Gutenberg MODEL FC-50G YEAR 2021 DESCRIPTION: FC-50G CO2 lasers offer consistent, high-quality marking on many types of materials on the production line, including plastics, ceramics, rubber, paper and fiber products. CO2 laser marking systems are designed for easy integration into production lines and automation cells with their sturdy cabinets, rotating marking heads, and internet-ready controls. Advantages 1. High precision and fast speed. Marking depth is controllable optionally. 2. Wide application. It can mark most non-metals. 3. No consumption and pollution. 4. The marking lines are clear, it can withstand heavy wearing. 5. English software. The software works in Windows environment and it is compatible with many file formats, for instance, PLT, PCW, DXF, BMP and others saved by CORELDRAW, AUTOCAD, PHOTOSHOP and other software. Meanwhile, SHX and TTF can be imported into the software directly. Marking and Engraving FC-50G is suitable for laser marking and surface-engraving. This laser machines apply precise, permanent and abrasion-proof marks on nearly every material by Annealing, Color Change/Frothing, Color/Material Removal, Carbonizing or Surface-engraving. CO2 laser marking machine adopts CO2 RF laser and high-speed scanning galvanometer system imported from the United States. It is equipped with high quality optical devices, high stability laser power supply and automatic control system.
Description: Hockey SP 1800 antibacterial hand gel pack filling machine with vertical intermittent-motion to produce convenient, practical, and consumer-friendly packs. for customers who need a versatile and highly efficient machine, it's been designed for max flexibility, fast changeover in a minimal footprint. Suitable for Disinfectant hand gel for Travel sachet With all options like tear notches, various seal patterns and shapes, static elimination, embossing, to meet your exact specifications. Hockey SP 1800 is the machine for all levels of production demand, from entry level 2-lane pack all the way up to a 12 lane able to package up to 30~50 cycles/min, depends on the width of Alcohol hand gel sanitizer sachet When it comes to high speed Disinfectant hand gel pack filling machines, go to the best with Hockey SP 1800
REFERENCE PB-90 CATEGORY Converting Equipment MANUFACTURER Gutenberg MODEL PB-90 SIZE 1860x2000 mm. YEAR 2021 DESCRIPTION: The best choice for making a paper bowl. This paper bowl former enjoys stable performance, standard manufacture and good production capacity. The paper tube forming machine is extremely applicable to make popcorn cups, paper tubs and more. Ideal for: Round paper cups, noodle and vending cups ice cream and food containers... Features The Turnplates: The Machine adopts two turnplates to process the paper cup top. Compare to three turnplates, two turnplates can simplify and stabilize the high-speed processing process and ensure better product quality. This design is also good for producing a high bowl The Transmission: The transmission part adopts an automatic lubrication system which can reduce mechanical wear and make the machine function smoothly. The Processing: Independent edible lubrication system can make the cup processing process cleaner. Installing according to the custom's requirement. The Control System: The machine comes with a PLC control system, sensor failure detecting, and can stop working automatically if the machine has any problem so it can greatly improve operation safety and reduce labour cost. Technical Data Cup Size: 24-40 OZ Cup Top Diameter: Max 150 mm Cup Height: Max 110 mm Raw material: Single or Double PE/PLA Coated Paper GSM: 190-500 g/m2 Speed : 80-90 pcs/min Power Source: 220V / 380V 50Hz General Power: 12 KW Gas Source: 0.5 m3/min Weight: 4000 KG Packing Size : L 2900 x W 1860 x H 2000 mm Packing Material: Wooden Case
Category Converting Equipment Manufacturer Gutenberg MODEL MB-1400 SL SIZE 2400x1800 mm DESCRIPTION: The slitting machine can cut the paper roll into the specified size paper roll. Technical Data Max. Paper Cutting Width: 1400 mm Max. Paper Roll Diameter : 1500 mm Max. Rewinding Roller Diameter: 400 mm Machine Max. Speed: 450 m/min Max. Slitting Speed: 400 m/min Tolerance Slitting Width: =±0.15 mm Min. Slitting Width: 30 mm Power Supply: AC 380V, 50HZ, 3 phases, 4 wires Rated Power: 33 kw Machine Dimension: L 3800 x W 2400 x H 1800 mm Machine Weight: About 5000 kg Parameters Power: 3 Phases, 380V ±10%, 50 Hz Compressed Air: Pressure: 0.6 MPa | Oil and Humidity: 8 mg/m3 Installation Height: Max. altitude: 1500 m Ambient Requirement: Relative Moisture: Max. 65% when 40 C | Temperature Range: 10~40 C
