Peel-off varnish liquid film protects surfaces from any contamination. Size 5kg 10kg 20kg Peel-off paint "liquid film" protects surfaces from any contamination. The applied paint hardens after application and can be removed by simply peeling it off. For smooth, non-absorbent surfaces. For covering metal parts such as hinges, windows and door handles, machine parts, etc. Peel-off paint is used as temporary corrosion protection or packaging protection for small parts, machines, spray booths, etc. Heat-resistant up to 80 Weight n/a Size 5kg, 10kg, 20kg
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).
Secondary used surplus steel, electrical steel, transformer lamination, crgo, silicon steel cold rolled and hot rolled, seamless steel tubes, steel pipes scrap, transformers scrap, copper scrap, aluminium scrap, aluminium cable, copper cable, bright bars, black bars, shafts, hollow shafts, stainless, brass, wire rope.International trade
Mining equipments, hdpe pipes and geomembranes, industrial constructions, special vehicles. spanish ceramic tiles, electric cables and hdpe conduits. hotel equipment, as per kitchens, restaurants, industrial laundry, chemical products, tropical wood, irrigation material.
Packaging & Shipping - Delivery Lead Time 10-15 days - Minimum Order 50 Metric Ton - Supply Ability 8900000000000000 - Total quantity in Stock Over 5000 - Shipping Career DHL
Product Name: Cooper Scrap Wire Specification: Copper: 99.9% (Min.) Lead: 0.005% (Max.) Bismuth: 0.5% (Max.) Element: 0.005(% Total impurities: 0.3% (Max.) No. 1 cooper Copper Wire level 1: including without bare, No coating, without the pure Copper alloys, surface non oxidation, excluding the hair silk, the Copper Wire 1.6 mm diameter should not be less than.
Ubc Scrap Is Available For Sale Inlarge Quantity, Its Not Mixed With Any Other Material.do Contact Us For Delivery And Sales. Delivery By Air Or Sea Payment Terms : Tt Only
Rice, grains, canned food, nutella, chocolates, nido milk powder, electronic scrap, sweets, candy, milk powder, milk, vegetables, beef meat, chicken, frozen chicken, chicken feet, chicken paws, sunflower oil, eggs, coffee, tea, spices, condiments, confectionery, fruits, a4 copy paper, cream chargers, wood pellets, beauty products, cosmetics, shaving products, perfumes, baby products, mineral water, natural water, detergents, personal care, oral care, medical gloves, face masks, energy drinks, swimming pool container, contact lenses, dyson products, nivea, dove, axe, rexona, ice tea, tea yellow label, pampers, pringles, deodorant, body lotion, shower gel, la prairie, sugar, non lme copper cathode, copper wire scrap (millberry), copper ingot, copper concentrate, used rail, aluminum wire scrap, hms, metal scrap, aluminum ingot.Logistic
Chemical solvents like acetone, ethanol, ipa,mix xylene, mix toluene etc ( recycled, off grade, stock, contaminated, expired products.:
Lubricants, greases, base oil sn80, sn150, sn500.
Metal scrap like copper scrap, aluminium scrap, car engine scrap, all car parts scrap.
We can supply used rail R50 and R65 Composition: C - 0.54-0.82 %, SI -0.18-0.40%, MN - 0.60-1.05%, S - 0.04% maximum P - 0.035% maximum AS: 0.01% maximum of mass share 1. Technical terms: used rail R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyer's instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust. No heavy rust. It is mandatory that rails must be cut into length 1.5 meter (max.) before shipment.
Packaging: 100cm X 80cm X 100cm. Bale weight: 25 to 30kg. We pack 30 bales in a bundle making total bundle weight of 750kg to 900kg. Products Pure Aluminum UBC Scrap Grade AA Series GB/T1196-2002 Product Origin EU Al (min ) 99%-99.97% Alloy Or Not: Non-Alloy Color: Multicolor cans Secondary or not: Non-secondary
Cathode copper refers to high-purity copper produced through the electrolytic refining process. Cathode copper is characterized by its high electrical conductivity, excellent thermal conductivity, and good formability. Standard: ASTM, GB, DIN, BS, EN, JIS We have copper wire scrap in Large quantity we are ready and able to supply 2000Mt a month and more. our copper wire scrap is 99.78% pure. quality brass wire Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/ spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/ mm2, 900 N/ mm2, 500 N/ mm2, 450 N/ mm2, N/ mm2 Packing: shrink wrapped+ carton+ pallet to resist moisture, quake, and corrosion. Application: used on low speed wire cutting machines like Agie- charmilles,� Sodick, Mitsubishi and Makino. Usage: Electrical, light industry, machinery, building industry, national defense industry Copper Scrap is industry a important sources of the raw materials All kinds of can be recycled Recycling waste production with copper Specification: Copper WIRE SCRAP, ( Millberry) 99.78% at a purity of 99.78% min. 99.78% Max. COPPER: 99, 9% CARBON: 0.03% COBLET: <0, 001 IRON: 0, 005% PHOSPHORUS: <0, 01% SULPHUR: <0, 01% ZINC: 0, 003% We offer the best copper wire at a very affordable price. copper wire scrap are ready for shipment.
We offer Aluminum Scrap 6063 is (Briquetted form 15 inch x 15 inch & o25cm x 25cm x 20cm and weight range 25 Kg to 35 Kg) mill finish / anodized.Material contains no attachment, and no chips in the bundles/ briquettes. Material is only white and not painted No plastic content, No Iron related materials. Dimension of briquette only 15 inch x 15 inch and or 25cm x 25cm x 20cm and weight range 25 Kg to 35 Kg. Products Pure Aluminum Extrusion Scrap Grade AA Series 6000, 6061, 6063 Product Origin EU Al (min ) 99%-99.97% Alloy Or Not: Non-Alloy Color: Silvery white metal Secondary or not : Non-secondary
We offer Aluminum Scrap 6063 is (Briquetted form 15 inch x 15 inch & o25cm x 25cm x 20cm and weight range 25 Kg to 35 Kg) mill finish / anodized.Material contains no attachment, and no chips in the bundles/ briquettes. Material is only white and not painted No plastic content, No Iron related materials. Dimension of briquette only 15 inch x 15 inch and or 25cm x 25cm x 20cm and weight range 25 Kg to 35 Kg Products Pure Aluminum Extrusion Scrap Grade AA Series 6000, 6061, 6063 Product Origin  EU Al (min ) 99%-99.97% Alloy Or Not: Non-Alloy Color: Silvery white metal Secondary or not: Non-secondary
Aluminium wheel scrap consists of discarded aluminium alloy wheels, which are highly recyclable and ideal for producing aluminium ingots. These scraps have a high aluminium content and are primarily used in industries requiring lightweight and durable materials. Aluminium wheel scrap refers to used or damaged aluminium alloy wheels that are recycled to produce aluminium ingots. This scrap is popular due to the high aluminium content, typically around 99%, and its potential for reuse in various manufacturing sectors. Features: High Purity: Contains 99.9% aluminium, making it ideal for further processing and refining. Applications: Mainly used in the production of lightweight, corrosion-resistant products such as automotive parts, aerospace components, and construction materials. Environmental Benefits: Recycling aluminium wheel scrap reduces the need for virgin aluminium production, saving energy and reducing carbon emissions. Industrial Use: Industries involved in vehicle manufacturing and construction highly value aluminium wheel scrap for its ease of melting, fast processing, and significant cost savings compared to new aluminium.
