dimension (net): 310 x 310 x 535 mm, 10 lt capacity, power: 1, 5 kw, elegant design, heat isolation. Double hull body system provides heating with minimum energy, making tea in a short time; tea does not lose its taste because of no overheating, protection against resistance burn, cuts off the power automatically when the machine is out of water, easy to clean. Net weight. , 5 kg Gross weight: 4, 5 kg Gross dimension: 32 x 32 x 52 cm, carton boxes
I m2 ex d i, ii 2gd ex d td a iib t3-t4t tmax. Surf. Ip 65 ex. Technical description: luminaire consists from body, basic plate and Flange with protective glass. Body and flange are castings from grey cast Iron treated with polyester powder paint. Luminaire can be suspended By the steel pendant with 2 eyes o 18 mm on the upper part of the Body. Connecting area (increased safety „d“), with connecting clamps and 2 cable glands, is placed on the side of luminaire. Flange cable glands No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 Mm (no. 3-99.6170/1 for o 16 – 20 mm optionally). Area is enclosed With cover from grey cast iron. Steel basic plate with electric parts And reflector is fixed in the body. Flange with glass cover is screwed In the body and secured with locking screw and silicon sealing Against unlocking, thread shapes a rift of flameproof enclosure „d“. Protective hardened glass resistant against mech. Shock min. 7 j is Fixed to the flange, the connection is filled with polyurethane putty. A steel hinge is fixed to the flange as the mobile one and enables to Hang the flange during mounting or dismounting. Steel parts are Galvanized and chromated. Luminaire is equipped with protective guard from steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases. Luminaire is equipped with 2 inner and 1 outer earthing clamps for conducting connection. Luminaire is designed as the through-way one for 4-core cable; when used as the end piece, there is necessary to use blinding plug (optionally on order). Packing carton is filled with polyurethane foam instapak. Luminous sources: Spc 300 and 500w, with ballast box hql 250w, 400w, nav-e 210, 350w Carton (mm/pcs) 560x300x30mm, weight 24 kg/pc
Technical description: luminaire consists from body, basic plate and flange With protective glass. Body and flange are castings from grey cast iron treated With polyester powder paint. Steel pendant with eye o 18 mm is fixed to the Upper part. Connecting area (increased safety „d“), with connecting clamps And 2 cable glands, is placed on the side of luminaire. Flange cable glands No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 mm (gland No. 3-99.6170/1 for cable o 16 - 20 mm). Area is enclosed with cover from Grey cast iron. Steel basic plate with electric parts and reflector is fixed in the Body. Flange with glass cover is screwed in the body and secured with locking Screw and silicon sealing against unlocking; thread shapes a rift of flameproof Enclosure „d“. Protective hardened glass is resistant against mech. Shock min. 7 j and is fixed in the flange, the connection is filled with a polyurethan putty. A steel hinge is fixed to the flange as the mobile one and enables to hang Up the flange during mounting or dismounting. Steel parts are galvanized And chromated. Luminaire is equipped with protective guard from galvanized Steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting Terminal block enables interchanging 2 phases (4-core cable). Luminaire Is equipped with 2 inner and 1 outer earthing clamps for conductive connection. Luminaire is designed as the through-way one, when used as end piece, there is Necessary to use blinding plug (optionally on order). Packing carton is filled with Polyurethane foam instapak. Luminous sources: Hwl160 w e27, dulux d26 w g24d-3, bulb100w/220 e27, nav-e 110 w e27, hql125 w e27, nav-e 50/l 50 w e27, hql 80 w e27, clas 200 w e27, master pl e 23 w e27 and next Carton (mm/pcs) 430x240x240, weight 18 kg/pcs
2G Ex de IIC T4-T6 Gb II 2G Ex de IIC T4-T6 Gb II 2D Ex t IIIC T max.surf Db Luminaire consists of body, basic plate and flange with protective glass. Body and flange are made of AlSi alloy treated with polyester powder paint. Luminaire can be suspended by the help of steel pendant with eye o 18 mm. The connecting area (increased safety „e“) is placed on the side of the body and equipped with connecting clamps and 2 cable glands HSK-K-Ex M25x1.5 for cables o 9-16 mm. Area is enclosed with cover and sealed with silicon. There is aluminium basic plate with electro-module mounted inside the luminaire. Electro-module consists of 20 x LED CREE XP-G (luminous flux 4000 lm, lumen per watt 88 lm/W, colour temperature 3700-5000, Colour Rendering Index ~80, guaranteed life-time min. 50.000 hrs.) and cooling unit. Input of the luminaire is adjustable (45W/22,5W) by changing output current of the LED driver 700mA/350mA. Flange with protective glass is screwed in the body and locked with securing screw; thread shapes a rift of flameproof enclosure „d“. Protective hardened glass is resistant against mech. shock min. 7 J and is fixed in the flange; the connection is filled with polyurethane putty. The mobile steel hinge is fixed to the flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw V-Ex or to blind one unused cable gland with blinding plug HSK-V-Ex. The blinding parts can be delivered on order optionally. Versions K are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam Instapak. luminous sources: EcoClasik 140W E27, CLAS 200W E27, DULUX D26 W G24d-3, Bulb100W/220 E27, NAV-E 110 W E27, HQL125 W E27, NAV-E 50/l 50 W E27, HQL 80 W E27, Master PL E 23 W E27 and next. Carton 410 cm x 240 cm x 240cm , Weight 10 kg/pc
Ii 2g ex de iic t6 gb Ii 2d ex t iiic t 60 °c db Luminaire consists of body, basic plate and Flange with protective glass. Body and flange are made of alsi alloy Treated with polyester powder paint. Luminaire can be suspended By the help of steel pendant with eye o 18 mm. The connecting area (increased safety „e“) is placed on the side of the body and equipped With connecting clamps and 2 cable glands hsk-k-ex m25x1.5 for cables O 9-16 mm. Area is enclosed with cover and sealed with silicon. There is Aluminium basic plate with electro-module mounted inside the Luminaire. Electro-module consists of 20 x led cree xp-g (luminous Flux 4000 lm, lumen per watt 88 lm/w, colour temperature 3700-5000, Colour rendering index ~80, guaranteed life-time min. 50.000 hrs.) and Cooling unit. Input of the luminaire is adjustable (45w/22, 5w) by changing Output current of the led driver 700ma/350ma. Flange with protective Glass is screwed in the body and locked with securing screw; thread Shapes a rift of flameproof enclosure „d“. Protective hardened glass is Resistant against mech. Shock min. 7 j and is fixed in the flange; the connection Is filled with polyurethane putty. The mobile steel hinge is fixed to The flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw v-ex or to blind one unused cable gland with blinding plug hsk-v-ex. The blinding parts can be delivered on order optionally. Versions k are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam instapak. Carton 410 cm x 240 cm x 240cm , Weight 10 kg/pc
In turkey we are producing high quality wind turbines .Please ask for our catalogs for detailed information. Tower type: composite coating over steel lattice Tower weight :18t Rotor blade type: horizontal axis, 3 blades
Hydraulic turbines.
Steam turbines.
Gas turbines.
Dear sir We have some stock containers (2 ) about ps55 (a55) clear bulb with various kind of watts (aluminium base e27, 220-240 v, 50/60 h, 300 gr box packing) in Istanbul –Turkey port and They are ready to delivery, with 100 pcs. Export ctns. Total 4700 ctns as fob/istanbul. The photos are attached .If you are interested in with them please inform us as soon as possible. 100 pcs export cartoons
Caracteristicas Técnicas : Ancho / Width X Largo / Length X Alto / Height : 180 X 280 X 380 Peso / Weight : 10Kg Voltage / Weight : 230V/110V/220V Frecuencia / Frequency : 50Hz / 60Hz Fases / Phases : 1(monofásico / Single phase) - Rpm: 1300 / 1600 Intensidad / Current : 2, 8 A / 6,2 A - Condensador / Condenser : 10nf / 40nf Potencia / Power : 0,50Hp / 570W Grado de protección / Degree of protection : IP21 Motor provisto de protector térmico / Motor equipped with thermal protector Tiempo máximo de funcionamiento continuo / Maximum continuous operation time : 30 min. Paro / marcha versión estándar : arranque automático /ON/OFF, standard version.
Caracteristicas Técnicas : Ancho / Width X Largo / Length X Alto / Height : 170 X 340 X 410 Peso / Weight : 6Kg Voltage / Weight : 230V/110V/220V Frecuencia / Frequency : 50Hz / 60Hz Fases / Phases : 1(monofásico / Single phase) - Rpm: 1300 / 1600 Intensidad / Current : 1,15A / 2,47A - Condensador / Condenser : 10nf / 40nf Potencia / Power : 0,10Hp / 270W Grado de protección / Degree of protection : IP21 Motor provisto de protector térmico / Motor equipped with thermal protector Tiempo máximo de funcionamiento continuo / Maximum continuous operation time : 30 min. Muelas de acero templado (62Rb) de 60 mm de diámetro / 60 mm diameter tempered steel grinding wheels Duración de las muelas : 500Kg de café / Duration of grinding wheels : 500Kg coffee Capacidad de la tolva : 1/2kg de café en grano / Hopper capacity: 1/2kg of coffee grains Paro / marcha versión estándar : molido y dosificación instantáneos / ON/OFF, standart version : Instant grinding and dispensing 0 - 500g = 6’. - C. O. C : 1Kg. - Ruido aéreo : 77 dB Diseñado bajo directiva 89/392 CE / Designed according to EC directive 89/392.
Caracteristicas Técnicas : Ancho / Width X Largo / Length X Alto / Height : 180 X 280 X 380 Peso / Weight : 6Kg Voltage / Weight : 230V/110V/220V Frecuencia / Frequency : 50Hz / 60Hz Fases / Phases : 1(monofásico / Single phase) - Rpm: 1300 / 1600 Intensidad / Current : 1, 3 A / 2,7 A - Condensador / Condenser : 8nf / 40nf Potencia / Power : 0,10Hp / 270W Grado de protección / Degree of protection : IP21 Motor provisto de protector térmico / Motor equipped with thermal protector Tiempo máximo de funcionamiento continuo / Maximum continuous operation time : 30 min. Paro / marcha versión estándar : arranque manual /ON/OFF, standard version: Manual start-up Diseñado bajo directiva 89/392 CE / Designed according to EC directive 89/392.
Caracteristicas Técnicas : Ancho / Width X Largo / Length X Alto / Height : 210 X 380 X 600 Peso / Weight : 9 Kg Voltage / Weight : 230V/110V/220V Frecuencia / Frequency : 50Hz / 60Hz Fases / Phases : 1(monofásico / Single phase) - Rpm: 1300 / 1600 Intensidad / Current : 1, 75 A / 3,7 A - Condensador / Condenser : 10nf / 40nf Potencia / Power : 0,20Hp / 356W Grado de protección / Degree of protection : IP21 Motor provisto de protector térmico / Motor equipped with thermal protector Tiempo máximo de funcionamiento continuo / Maximum continuous operation time : 30 min. Muelas de acero templado (62Rb) de 60 mm de diámetro / 60 mm diameter tempered steel grinding wheels Duración de las muelas : 500Kg de café / Duration of grinding wheels : 500Kg coffee Capacidad de la tolva : 2kg de café en grano / Hopper capacity: 2kg of coffee grains Capacidad del dosificador : 600 g de café molido / Dispenser capacity : 600 g of ground coffee Regulación del dosificador : 5 - 12 g de café molido / Dispenser adjustment : 5 - 12 g of ground coffee Paro / marcha versión estándar : Arranque manual / ON/OFF, standart version : Manual start-up En opción: arranque automático cada 2 cafés/ Opcional: Automatic start every 2 coffee La palanca de accionamiento del dosificador puede estar colocada a la izquierda o a la derecha / The dispenser lever can be placed on the left or right side. 0 - 500g = 5’. - C. O. C. : 3 Kg. - Ruido aéreo: 77dB Diseñado bajo directiva 89/392 CE / Designed according to EC directive 89/392.
Caracteristicas Técnicas : Ancho / Width X Largo / Length X Alto / Height : 145 X 310 X 345 Peso / Weight : 4Kg Capacidad dosificador : 600 g de café molido / Dispenser capacity : 600 g of ground coffee.
Caracteristicas Técnicas : “SILENCIOSO” Ancho / Width X Largo / Length X Alto / Height : 185 X 270 X 525 Peso / Weight : 12 Kg Voltage / Weight : 230V/110V/220V Frecuencia / Frequency : 50Hz / 60Hz Fases / Phases : 1(monofásico / Single phase) - Rpm: 1300 / 1600 Intensidad / Current : 1,15 A / 2,47 A - Condensador / Condenser : 10nf / 40nf Potencia / Power : 0,10Hp / 270W Grado de protección / Degree of protection : IP21 Motor provisto de protector térmico / Motor equipped with thermal protector Tiempo máximo de funcionamiento continuo / Maximum continuous operation time : 30 min. Muelas de acero templado (62Rb) de 60 mm de diámetro / 60 mm diameter tempered steel grinding wheels Duración de las muelas : 500Kg de café / Duration of grinding wheels : 500Kg coffee Capacidad de la tolva : 1kg de café en grano / Hopper capacity: 1kg of coffee grains Regulación del dosificador : 5 - 12 g de café molido / Dispenser adjustment : 5 - 12 g of ground coffee Paro / marcha versión estándar : molido y dosificación instantáneos / ON/OFF, standart version : instant grinding and dispensing . 0 - 8g = 6’’. - C. O. C. : 2 Kg. - Ruido aéreo: 63dB Diseñado bajo directiva 89/392 CE / Designed according to EC directive 89/392.
Caracteristicas Técnicas : 'SILENCIOSO' Ancho / Width X Largo / Length X Alto / Height : 400 X 250 X 666 Peso / Weight : 24 Kg Voltage / Weight : 230V/110V/220V Frecuencia / Frequency : 50Hz / 60Hz Fases / Phases : 1(monofásico / Single phase) - Rpm: 1300 / 1600 Intensidad / Current : 4, 4 A / 9,46 A - Condensador / Condenser : 25nf / 100nf Potencia / Power : 0,60Hp / 920W Grado de protección / Degree of protection : IP21 Motor provisto de protector térmico / Motor equipped with thermal protector Tiempo máximo de funcionamiento continuo / Maximum continuous operation time : 30 min. Muelas de acero templado (62Rb) de 65 mm de diámetro / 65 mm diameter tempered steel grinding wheels Duración de las muelas : 500Kg de café / Duration of grinding wheels : 500Kg coffee Capacidad de la tolva : 1kg de café en grano / Hopper capacity: 1kg of coffee grains Regulación del dosificador : 5 - 12 g de café molido / Dispenser adjustment : 5 - 12 g of ground coffee Paro / marcha versión estándar : molido y dosificación instantáneos / ON/OFF, standart version : instant grinding and dispensing . 0 - 8g = 3’’. - C. O. C. : 4 Kg. - Ruido aéreo: 63dB Diseñado bajo directiva 89/392 CE / Designed according to EC directive 89/392.
Caracteristicas Técnicas : Ancho / Width X Largo / Length X Alto / Height : 210 X 250 X 605 Peso / Weight : 25 Kg Voltage / Weight : 230V/110V/220V Frecuencia / Frequency : 50Hz / 60Hz Fases / Phases : 1(monofásico / Single phase) - Rpm: 1300 / 1600 Intensidad / Current : 5, 75 A / 12,3 A - Condensador / Condenser : 108nf / 324nf Potencia / Power : 0,75Hp / 980W Grado de protección / Degree of protection : IP21 Motor provisto de protector térmico / Motor equipped with thermal protector Tiempo máximo de funcionamiento continuo / Maximum continuous operation time : 30 min. Muelas de acero templado (62Rb) de 65 mm de diámetro / 65 mm diameter tempered steel grinding wheels Duración de las muelas : 500Kg de café / Duration of grinding wheels : 500Kg coffee Capacidad de la tolva : 1/2kg de café en grano / Hopper capacity: 1/2kg of coffee grains Paro / marcha versión estándar : molido y dosificación instantáneos mediante pulsador ON/OFF, standard version:Instant pushbutton-activated grinding and dispensing. 0 - 500g = 1,44” - C. O. C. : 20 Kg. - Ruido aéreo: 63dB Diseñado bajo directiva 89/392 CE / Designed according to EC directive 89/392.
Caracteristicas Técnicas : Ancho / Width X Largo / Length X Alto / Height : 270 X 460 X 630 Peso / Weight : 13 Kg Voltage / Weight : 230V/110V/220V Frecuencia / Frequency : 50Hz / 60Hz Fases / Phases : 1(monofásico / Single phase) - Rpm: 1300 / 1600 Intensidad / Current : 2,1 A / 4,7 A - Condensador / Condenser : 14nf / 55nf Potencia / Power : 0,37Hp / 497W Grado de protección / Degree of protection : IP21 Motor provisto de protector térmico / Motor equipped with thermal protector Tiempo máximo de funcionamiento continuo / Maximum continuous operation time : 30 min. Muelas de acero templado (62Rb) de 65 mm de diámetro / 65 mm diameter tempered steel grinding wheels Duración de las muelas : 500Kg de café / Duration of grinding wheels : 500Kg coffee Capacidad de la tolva : 1,5kg de café en grano / Hopper capacity: 1,5kg of coffee grains Capacidad del dosificador : 600 g de café molido / Dispenser capacity : 600 g of ground coffee Regulación del dosificador : 5 - 12 g de café molido / Dispenser adjustment : 5 - 12 g of ground coffee Paro / marcha: arranque automático cada 2 cafés/ ON/OFF: Automatic start every 2 coffee La palanca de accionamiento del dosificador puede estar colocada a la izquierda o a la derecha / The dispenser lever can be placed on the left or right side. 0 - 500g = 3’ . - C. O. C. : 4 Kg. - Ruido aéreo: 63dB Diseñado bajo directiva 89/392 CE / Designed according to EC directive 89/392.
Caracteristicas Técnicas : Ancho / Width X Largo / Length X Alto / Height : 210 X 355 X 555 Peso / Weight : 11 Kg Voltage / Weight : 230V/110V/220V Frecuencia / Frequency : 50Hz / 60Hz Fases / Phases : 1(monofásico / Single phase) - Rpm: 1300 / 1600 Intensidad / Current : 1, 55 A / 3,33 A - Condensador / Condenser : 9nf / 40nf Potencia / Power : 0,16Hp / 325W Grado de protección / Degree of protection : IP21 Motor provisto de protector térmico / Motor equipped with thermal protector Tiempo máximo de funcionamiento continuo / Maximum continuous operation time : 30 min. Muelas de acero templado (62Rb) de 60 mm de diámetro / 60 mm diameter tempered steel grinding wheels Duración de las muelas : 500Kg de café / Duration of grinding wheels : 500Kg coffee Capacidad de la tolva : 1kg de café en grano / Hopper capacity: 1kg of coffee grains Capacidad del dosificador : 600 g de café molido / Dispenser capacity : 600 g of ground coffee Regulación del dosificador : 5 - 12 g de café molido / Dispenser adjustment : 5 - 12 g of ground coffee Paro /marcha: arranque automático cada 2 cafés/ ON/OFF: Automatic start every 2 coffee La palanca de accionamiento del dosificador puede estar colocada a la izquierda o a la derecha / The dispenser lever can be placed on the left or right side. 0 - 500g = 6’. - C. O. C. : 3 Kg. - Ruido aéreo: 63dB Diseñado bajo directiva 89/392 CE / Designed according to EC directive 89/392.
