The machine complex is designed for packaging 1-2-5 kg flour info premade paper bags.
The line is designed to fill beer in to three different type of 0,33 litre glass bottles, label the bottles neck around and lower body small around and pack the bottles in to 4 x 6 bottle cartoon boxes. This bottling line capacity is 20000 bph. Clean glass bottles were brought on wooden pallets to depalletizer which feed them to the filling lines. Innofill DMG bottle filling machine and Handtmann MMS filtration system are located in a clean air room. KHS lamella conveyor system for bottle transport and cartoon boxes. The equipment were totally delivered by German KHS in year 2003, most of machines manufactured in year 2002. All control units are Siemens Simatic S7 model with remote connection. The line was shut down in year 2008 and it is still installed and in very good operational condition. Main equipment are: - Bottle Depalletizer KHS AL, semiautomatic - Micro Filtration Handtmann MMS 130 - Filling Equipment KHS Innofill DMG (rinsing, filling and capping) - Labelling Machine KHS Innoket 2060 - Cartoon Box Forming Machine KHS Innopak CA-1 - Bottle Packing Robot KHS Innopak SP 1200 - Box Marking System - Case Sealer KHS Innopak CV.
Kisters Wrap Around Packer 310 Kisters fully automated wrap around packer model 310 is a single-lane, high-performance packing robot for producing wrap-around and tray packs from stable individual products. It can handle tins, cans, jars, glass and PET bottles, as well as pre-packed products from the beverage, hygiene and food processing industry with high packaging speeds. It can process flat corrugated cardboard and full carton blanks in different qualities. In each case, the carton is folded tightly around the product groups and subsequently glued with hotmelt and it has a large and easily accessible cardboard blank magazine. Optimum packaging results are achieved in conjunction with the precise cardboard blank guides and the exact folding process. Wrapping robot can handle a wide range of formats. The unit is PLC-controlled and it can be easily adjusted for other packing formats. This machine has been packing beer tins (12/24 x 0.3 liters and 12 / 24 x 0.5 liters) into cartoon wrap-around packs at speed of 60 packs / min. This unit was in full operation till beginning of November 2010 and is now dismantled and stored. Technical Data Manufacturer: Kisters Machinenbau GmbH (Nowadays KHS ) Model: Wrap Around Packer 310 / 100 Year of manufacture: 1994 Serial number: 941782 Capacity: upto 60 cycle / min Electricity: 16 kVA, 400 V / 50 Hz
This laminating tunnel / convection oven is made by Swedish TRIAB / Tri Innovations AB in year 2006. The oven is designed for industrial use and in build up in two separable laminating sections, both equipped with one 40.5 kW hot air sections, one product and one return conveyors and common control unit. All product touching parts are made either of stainless steel (structures and panels) or Teflon made net belts. Convection belt (600 mm wide) is located inside of the oven tunnel and has grid type surface, the return conveyor is installed on the tunnel and it has tight waived Teflon belt. The control cabinet is attached to the equipment structures. The speed of laminating conveyor is adjusted with an inverter driven motor. The speed of return conveyor can be fine tuned via a potentiometer. The equipment is featured with a remote control possibility. This has been operating with hygienic products (material foam / polyurethane film, thickness 5 mm, max. width 450 mm and production speed 6 m/min) and is in excellent operational condition with total 3450 operating hours only and it comes with original operation manual in English language. Technical data: Made by: TRIAD / Air Innovations AB Manufacturing year: 2006 Total operating hours: 3450 Convection capacity: 2 x 40.5 kW Process control PLC: Eurotherm 2216e Hot air circulation volume: 2 x 9000 m3/h Fan electric power: 2 x 2.2 kW Temperature range: 50 – 150 C Total machine length: 10 000 mm Total machine width: 1600 mm Convection belt material: Teflon covered metal net Convection belt length: 9 000 x 600 mm Convection belt speed: 3 – 8 m/s / 0.25 kW, inverted controlled Heated width: 650 mm Inside / free height: 80 mm (from belt to nozzles) Return conveyor: Habasit FAB-8EO WV Return conveyor dimensions: 12000 x 600 mm (Teflon) Return conveyor drive: 0.25 kW, 380 V/50 Hz.
This Powerpak 660 horizontal thermoforming machine (form/fill/seal) is manufactured by German Tiromat Krämer+Grebe GmbH & Co in 1998. It is designed for high capacity packing of various products in food and pharmaceutical industry. This unit has been packing bread in to vacuum pack and it is equipped with a three head hot foil printer, 2- gas mixing device for CO2 injection, separate vacuum pump, cross- and longitudinal cutters and water cooled upper cover of the forming unit. Construction material is food quality stainless steel and equipment is controlled with PC-programmable Tiromat Control Unit. This unit has very little operation hours - estimated total 3000 hours - and therefore it is in excellent condition. Operating and service manuals in English, Finnish and German and machine comes with the CE-certificate. Machine type:Powerpak 660 Machine number:665/0211 Manufacturing year:1998 Foil type:Flexible Formatting width:430 mm Film type used:PS-PE 450/50 Max formatting depth:40 mm Forming dies:223-3,1 Capacity:10 phases / min Control unit:Tiromat Ho foil printer:SC-700 with 3 printing units Overall length:7.30 meters Overall width:1.15 meters Height:1.85 meters Nominal power need:50 A / 380 V / 50 Hz.
Drum and Container Filling Line, Semiautomatic YOC 2006 The line is designed for filling both 1000 liter IBC’s and normal 209 liter drums / barrels. It consist of straight chain driven heavy duty roller conveyor which is carrying IBC’s or a standard pallet loaded with four drums / barrels through the filling process and conveying them for further storing. The filling machine is semiautomatic coarse-and-fine filling station; first is programmable volumetric and then fine filling with integrated weighing system. Cap closing / bunging and sealing will be made manually but a machine aided. The station operation is controlled by Siemens S7C programmable logic. The line is manufactured in 2006 by Finnish company “Insinööritoimisto Jyrki Kekälainen” who is specialized supplying automation solutions filling and packing applications. Operation description: The operator lifts the empty containers on the conveyor (open the cap of container), the container will move into filling machine and it will be filled automatically with 2 "and 1 / 2" valves, coarse-and fine-filling. After filling the container will move out of the machine and the operator will fix the label and close the cap. After the filling station there is ~16 m long puffer conveyor for the filled IBC`s, where a fork lift will pick up the IBC`s In drum filling the operator lifts the empty drums on pallet (open the caps). Then he lifts the pallet on the conveyor. In the machine there is an extra filling lence for the drums. The drums are filled on the weighing system of the machine which is controlling the filling of each barrel. After the drum is filled the operator move the lence into second drum and machine start to fill it. After all drums are filled the pallet will move out of machine and the operator will close the caps and fix the seals and labels. Technical data: Manufactured in: 2006 Suitable for: Standard IBC and Drums Max filling weigh: 1500 kg Filling accuracy: 0.5 kg Filling capacity: 7 IBC/hour or 35 Drums (209 liters) / hour Roller conveyor type: Chain Driven, Galvanized Roller conveyor length: Approx 16 meters Roll diameter: 80 mm.
EKO – 32H / HORIZONTAL ON-EDGE PACKAGÝNG MACHINE WITH FEEDER •Photocell and speed control system Includes. •Packaging is easy, straight forward and continuous. • feeded properly 100 packets / minute can be achieved. • the Biscuit sizes and dimension are nearly the same round and rectangular biscuits can be packaged. •The machine will be double jaws with cut-off knife. •work s easily to produce neat and continues packets. • Film holders with quick release lock, minor adjustor and adjustable brake • has photocell “data logic” made in Italy or “sick” Made in Germany • has 4 sets temperature controllers “autronix” made in Turkey . •It has Electrical controlled variable speed drive. •It has safety switch and guard design. Design will be done according to the packet size you need.(60x100 MM).
The quadropack pack 1 is a high speed flowpack machine designed for flexibility and durability. The servo driven design works in continuous mode with cross seal units that are equipped with rotating tools and single or multiple sealing bars. The machine is able to achieve speeds up to 600 ppm. In combination with automatic feeders. Unpacked, ex works, weight and dimensions depending on model.
Packaging machine equiped with a multihead weigher. 2000(W)*3500(H)*2000(L).
Roll bale wrapping machine.
Mattress Edge Tape Specific: Polyester ,polyproplene, pp-polyester Width:20mm-70mm Min.Order Quantity: 200.000 mt. 100mt roll * 10 = 1000 mt per nylon bag
Vinyil asetat acrilic ester copolymer used in automatic selefan machine as lamination glue .
Basas ambalaj company since 1989 mainly specialized in production of high-qualitative pvc films. And now we are exporting our production at Middle East, Europe, Middle Asia.
Compact, easy-to-use, low-cost, such are the dominant features of the new PACK sealing machines
Max. Wrapping speed:0-30 m/min Foil width:30-1300 mm Lenght/width/height:6000x2150x2500 mm Weight:3.750 kg Total power:380v x 36kw
Slitting speed:-75 m/min Foil width:700 mm Min. Slitting width:15 mm Lenght/width/height:1070x1020x1100 mm Weight:650 kg Total power:2, 2 kw û 220v
Max. Wrapping speed:0-60 m/min Foil width:20-350 mm Lenght/width/height:6000x950x2000 mm Weight:2.500 kg Total power:380v x 56, 2kw
Max. Wrapping speed:0-60 m/min Foil width:35-350 mm Lenght/width/height:5000x950x2000 mm Weight:2.500 kg Total power:380v x 30, 7kw
Laminating machine, is reserved for lamination profiles and sheets, laminating by pvc film with hot polyurethane glue (PUR) Machine equipment and technical features: ò Monoblock in steel tank ò Total 140 different clamping cylindrical shafts ò System of submission film with one cylinder and braking system ò System of drawing glue with teflon coating ò Electronic system of centering submission film ò 92 pieces of figurative shafts with silicone and rubber covering ò Anti-static system for clearing profile area ò 6 thermo-pneumatic guns with heating regulation ò Special station for first coat ò Emergency turn off system for machine ò Digital displays showing the operating speed of the machine ò 5 meters front and 5 meters of back conveyers TECHNICAL FEATURES : Type of Folio : PVC, PP, Finish Foil Min Folio Width : 30 mm Max Folio Width : 1300 mm Profile Type to be Covered : MDF, DSP, DVP, PVC, Aluminium Profile Width : 15-1300 mm Profil Height : 250 mm Coating speed : 0-30 m/min Glue : Polyurethane hot glue DIMENSIONS : Machine frame : 6.000 mm Total height : 16.000 mm Width : 2.150 mm Height : 2.500 mm Weight : 3.750 kg POWER Main engine : 2,2 kw Hot Air Blowers : 6 x 3 kw Total Power : 36 kw Air Pressure : 6 Bar Voltage : 380 V Frequancy : 50 HZ
Cellophane film Excellent permeability for flavour penetration Excellent barrier properties Increase yield during cooking Provides excellent shiny colour Good smoke results applies a nice smoke colour Excellent tightness with net Hygienic wrapping, no leakage of harmful compounds during smoking Biodegradable 30gsm: 400mm (100, 200m per roll) 480mm (100, 200m per roll) 600mm (100, 200m per roll)
