Compose A Joint Usg Boral - Ready Mix Joint Compound All Purpose Joint Compound Is Usually Sold Pre-mixed. This Product Is Used For Almost Every Drywall Installation And Repair. Joint Compound Is Used To Finish Drywall Joints And Corners. It Provides Faster And Superior Performance In Joint Closure. It Is Also Useful For Repairing Cracks And Holes In Existing Plasterboard And Plaster Surfaces. You Can Save Time By Using Joint Compound Cause It Does Not Need To Any Extra Process. It Is Ready To Use. It Takes 6 To 12 Hours To Dry, Depending On The Humidity And Temperature. Turkey Is One Of The World's Leading Country In The Gypsum Resources And Production Of Gypsum. As Board And Wall Company; We Export Highest Quality Of Gypsum Powder And Joint Compound All Around The World. Megaturk Co. Ltd, Istanbul - Turkey
Facade with a clean design, but a relatively more expensive performance due to the specific requirements for the sealing gasket and weather conditions during installation Possibility for glazing up to 64mm Extremely good thermal performance uw> = 0.6 w / m2k
A new generation of facades corresponding to different types of construction and architectural solutions Possibility of glazing up to 56mm Extremely good thermal performance uw> = 0.6 w / m2k Very good waterproofing and noise insulation characteristics
Contact sales department
"ISO" in the context of polyisocyanurate insulation typically refers to the insulation material's type or category rather than an acronym. Polyisocyanurate is a type of rigid foam insulation known for its high thermal resistance (R-value) and effectiveness in providing thermal insulation.
XPS Insulation (Extruded Polystyrene): "XPS" commonly refers to extruded polystyrene insulation. This type of insulation is known for its closed-cell structure, providing good thermal resistance and moisture resistance. It is often used in various construction applications, such as insulating walls, roofs, and foundations. B1 Fire Rating: The "B1" component might refer to a fire rating. In some fire classification systems, materials are rated based on their fire resistance, and "B1" could indicate a certain level of fire resistance. For example, in the European fire classification system (Euroclass), B1 represents a material with limited combustibility.
Tile leveling wedges : 5mm/250pcs/047USD-EXW 10mm/250pcs/1,10USD-EXW Tile leveling wedges eco : 100pcs / 1,45USD-EXW Brand name : ORBOFIX Origin : Made in Turkey Payment : TT, LC %30 in front at purchase, %70 before loading Whole Sale Price Minimum Order Quantity : 3000
Plaster of Paris Production Averages TESTING PARAMETERS Water / Gypsum Ratio - 7 lt water 10kg powder Crystal Water - 5,22 Diameter - 193,61 Initial Setting time - 07:35 Final Setting time - 14:55 Flexural Strength (7 days) - 4,91 N/mm2 Compressive Strength (7 days) - 15,62 N/mm2 Dry Density - 680 g/L Seive Analysis 45 m - 17,12 100 m -1,64 160 m - 0,39 200 m - 0 400 m - 0
Material :plastic, concrete Round conductor/flat tape range mm 8-10 Height / lenght mm 105 Diameter mm 130 Weight kg 1 Others warranty: up to 5 years
It is a cement-based, one-component, ready-to-use plaster and repair mortar with special particle size filler and chemical additives that increase product performance and workability. SCOPE OF APPLICATION - In exterior plastering and exterior restoration works in buildings - In providing a smooth surface before painting, ceramic coating, insulation - Filling fine cracks - In repairing the damaged surfaces such as poured, carved, broken, ruptured concrete, plaster and such - On surfaces such as concrete, gas concrete, ytong, briquette, brick, heat pumice, prefabricated concrete, - 1-5 mm application range.
- Cement-based, high performance, elastic thin insulation plate adhesive mortar containing special chemical additives, which is preferred in places where the ambient temperature changes suddenly or where it is flexible. - High bonding strength - Ease of application SCOPE OF APPLICATION - Bonding of plates indoors and outdoors in buildings, - On surfaces such as concrete, plaster, screed brick
- Cement-based, one-component, ready-to-use plaster and repair mortar containing special particle size filler and chemical additives that increase product performance and workability. SCOPE OF APPLICATION - In the interior plastering and interior restoration works in the buildings - In providing a smooth surface before painting, ceramic coating, insulation - Filling fine cracks - In repairing the damaged surfaces such as poured, carved, broken, ruptured concrete, plaster and such - On surfaces such as concrete, gas concrete, ytong, briquette, brick, heat pumice, prefabricated concrete, - 1-5 mm application range.
4-0mm powder size 6-0 Mass Patch Sand Size 8-5 mm and 11-7 mm Size 16-9 mm and 12-12 mm Size 17-35 mm and 40-23 mm
Pink Marble in Sheet QTY Per Container 20'' = 435 m2 Price/M2 - Eur 16,00
ANO-Step: The picture above is what we produce with dimensions width 155mm ,length 135 mm ,plug is 50mm and diameter is 25 mm . Product of origin : Greece Minimum order of steps are : 1500. And packaging is as request by customer .
Injectable mortar HIT-RE 500 V4/500 Features Ultimate performance and model code-compliant design for virtually any concrete-to-concrete and steel-to-concrete connections ETA assessment for anchoring inc. C1 and C2 seismic and ETA for rebar inc. fire and seismic The first epoxy mortar qualified according to EAD 332402-00-0601 for concrete-to-concrete connections rigid connections can now be designed and executed with post-installed rebars without splices according to the newest design method TR069 Suitable for the toughest jobsite conditions works even in diamond-cored, wet or underwater holes, extremely deep injections, large diameters and at temperatures down to -5 °C / 23 °F Improved bond strength in the most demanding applications such as cracked concrete and seismic C2 conditions Easier to specify and order use PROFIS Engineering to design baseplate connections and PROFIS Rebar to design concrete-to-concrete connections according to EC2, TR069 or the Hilti Design Method UKCA UKCA Products in this group are generally suitable for seismic loading. Products in this group have a published fire resistance rating. Products in this group are generally suitable for fatigue loading. Applications Structural connections with post-installed rebar (e.g. slab extensions, wall/column connections, stairs, foundations, etc.) Structural renovation of buildings, bridges and other civil works, retrofitting and re-strengthening of concrete members Anchoring structural steel connections (e.g. steel columns, beams, etc.) Fastening structural baseplates, including in cracked concrete and challenging seismic conditions Fastening in natural stone and wood, including GLT and CLT made from spruce, pine or fir Show all Technical data Approvals/test reports BZS/shock, ETA, Fire, Seismic Seismic loading Yes Fatigue loading Yes Fire resistance Yes PROFIS software Yes Clean-Tec No Storage and transportation temperature range 5 - 25 °C Shelf life from date of manufacture (at 23 °C and 50% relative humidity) 12 months
Used to prevent water leaks and fill cracks, polyurethane based, water reacting, one component solvent free .Semi flexible injection with closed cell structure foams
304 stainless steel pipes, carbon steel pipes, galvanized steel pipes, seamless pipes, stainless steel pipes, used drill bits.
Building materials, construction material.All the clearing and arrangements for shipping and conditions arranged by my client companies
General trading company from uk we sell: construction equipment construction materials shipping containers steel petroleum and oil barrels commodities such as aloe vera gel milk powders electronic goods, smart phone tv and displays safety equipment such as nitrile gloves and hand sanitizer.Import and export to and from uk
