An excavator grapple and dig bucket all-in-one, the NG Grab Bucket is the perfect tool for land clearing and demolition jobsites. Features dual thumb cylinders on the bucket for greater gripping force that follows the bucket throughout the entire curl cycle. The thumb is mounted directly to the bucket giving you superior machine versatility by allowing you to drop the entire thumb and bucket assembly as one piece.
NG Hydraulic Shear is suitable for various operations, including breaking the steel structure, scrap steel processing and other applications, cut iron material, steel, tank and tube etc, unique design and innovative ways to ensure the efficient operation and powerful cutting force. Quick Couplers Buckets for Excavator Buckets for Loader Buckets for Quarry and Mining Special Equipment Demolition equipment Recycling equipment Buckets for excavator and loader Forestry equipment
NG BUCKET - NG ATTACHMENTS / Innovation Meets Excavation Complete range of standard and reinforced digging buckets for excavators and loaders, rear and front quick couplers. Line of special buckets, with wear-proof equipment and larger thicknesses, conceived for the extractive sector in quarry and mining for excavators up to 200 t. Quick Couplers Buckets for Excavator Buckets for Loader Buckets for Quarry and Mining Special Equipment Demolition equipment Recycling equipment Buckets for excavator and loader Forestry equipment
P.F.K. 250/3G - Pantograph Milling And Drilling Machine With the help of a template on PVC and aluminum profiles, it opens the lock place, the lever place via the gearbox, and the water discharge channels with the 3rd unit. It has a full electropneumatic system. It is double angled. Copy head on the vertical axis, triple drilling on the horizontal axis, and water discharge device at 45 degrees. PFK 250/3 G creates the locking area with the help of a template on PVC and aluminum profiles, and makes the lever place via the gearbox, and creates the water discharge channels with its 3rd unit Full electro-pneumatic system PFK 250/3 G is double-angled. Copy head on the vertical axis, triple drilling on the horizontal axis, and water discharge device at 45 degrees Makes all copy operations with the universal template Pierces the profile with triple drilling device. Low energy and air consumption Opens water discharge channels on PVC profiles at different angles Full automatic working system Technicial Specifications Voltage 220 -380 V Frequency 50-60 Hz Total power 1,5 Kw Air pressure 6 Bar Air Consumption 10 lt/min Dimensions (mm) 830 x 610 x 1270 Weight (Kg) 160
I would like to inform you about that our company, as RDS Machine manufactures and supplies drilling rigs and hydraulic rock drill drifters alternative(aftermarket) spare parts of Atlas Copco, Sandvik, Furukawa and Montabert brands.
I would like to inform you about that our company, as RDS Machine manufactures and supplies drilling rigs and hydraulic rock drill drifters alternative(aftermarket) spare parts of Atlas Copco, Sandvik, Furukawa and Montabert brands.
I would like to inform you about that our company, as RDS Machine manufactures and supplies drilling rigs and hydraulic rock drill drifters alternative(aftermarket) spare parts of Atlas Copco, Sandvik, Furukawa and Montabert brands.
I would like to inform you about that our company, as RDS Machine manufactures and supplies drilling rigs and hydraulic rock drill drifters alternative(aftermarket) spare parts of Atlas Copco, Sandvik, Furukawa and Montabert brands.
NEW JAW CRUSHERS READY AT STOCK NEW MODEL TOP QUALITY FROM 100 to 150 tph capacity. 900 x 650 mm feeding dimension 25 Cr + 2% Mo Casting parts 90kW Motor Power Features Heavy-duty base frame is submerged, arc-welded, then thermally stress relieved. Oversized, heavy-duty spherical, self-aligning roller bearings. Large diameter, drop-forged chrome-nickel steel pitman shaft. Large flywheels to ensure the inertia is maintained to crush even the hardest materials. HYDRAULIC SYSTEM 2 YEARS WARRANTY FREE OF CHARGE SPARE PARTS CALL FOR MORE INFORMATION
30 m3/h mobile & compact full automatic concrete batching plant from constmach Ideal solution for africa countries Most economic concrete plant in the market. Advantages of our mobicom 30 concrete plant: Unlike classical mobile concrete plants, our mobicom 30 concrete plant can be shipped within only 1 pcs 40ft container. It requires minimum site preparation and does not require a mobile crane for the installation. Only a loader is enough. If you supply the cement in bags, you can use this plant without investing in a cement silo. The plant can be shipped by a truck between your jobsites easily. Mixer capacity: 0.5 m3 Aggregate hopper: 4 x 5 m3, total 20 m3 Control type: full automatic Cement weighing hopper capacity: 300 kg Water weighing hopper volume: 200 lt Additive weighing hopper volume: 15 lt Cement opening bag & cement screw conveyor is included. Power:55hp Weight:9, 000kg Tyre condition:100% Colour:beige Bucket volume:1 m3 Chain status:100% Assembly & training is included in the price. Warranty : 2 years.
Full Automatic Stationary Concrete Plant Capacity : 120 m3/h Mixer : 3 m3 Wet Concrete Volume Cement Hopper : 1800 kg Water Hopper : 1000 kg Admixture Hopper : 50 kg Control Cabinet : Included in the price. Cement Silos : Excluded. Optional. ASSEMBLY & TRAINING IS INCLUDED IN THE PRICE. WARRANTY : 2 YEARS.
Spfinal drives major in supply excavator final drives, excavator travel motors in stock. Gm50 final drives for excavator accessory
excavator final drive pc200-7, excavator travel motor
R-Steel® Wire Loops and Boxes manufactured by R-Group Finland Oy are steel parts consisting of a high strength steel wire and a steel box. R-Steel® Wire Loop boxes are very easy to use on site, with proven no tool tear off tape that releases the flexible loops. Our wire loop box range includes: Single wire loop boxes and Double wire loop boxes. Highly effe�cient product available for both precast and cast in situ structure. It is mainly used in the connection of slabs, walls and columns. Quality control of the wire rope loops is done according to the requirements of the Finnish Code of Building Regulations and the instructions according to the quality and environment system of the R-Group Finland Oy (ISO9001 and ISO 14001). R-Group Finland Oy has a quality control contract with Inspecta Sertifiointi Oy. The steel box and the wire rope are zinc coated. Zinced products are passivized with min. 1 month of storage. R-Steel Loop is a flexible wire rope is bent to loop and held together by compression sleeve. R-Steel® Loop may be used e.g. to tie concrete wall elements to the building frame with ribbed steel bars installed through the wire rope loop. The wire boxes have the advantage of ease of casting and protection of the loop, however the R-Steel® loops can be used in thinner panels and can also be used for lifting. Single Wire Loop Boxes For Single Boxes available standard wire lengths of 60 mm, 80 mm, 100 mm, 120 mm and 140 mm. Double Wire Loop Boxes Double Wire Loop Box offers unique solution for joining double walls to precast elements. Design resistances can be achieved in all directions. Wire lenghts of 80 mm and 100 mm are available for double wire loop. Thickness of the steel plate of the box is 0,7 mm, according to SFS-EN 12385.
Yoncalik Casting - Concrete Spare Parts LTD is a leading company of producing well-known companies such as (Putzmeister, Schwing, Cifa, Sermac, Junjin, etc.) and Truck Mixers (Imer, Stetter, Baryvall, Intermix etc.) Besides that we produce our own Concrete Pump and Truck Mixer Spare Parts, Batching Plant Spare Parts, Cement Truck Cement Parts but we also sell genuine spare parts by offering attractive prices Over the 17 years of experience Yoncalik Casting Co. has two factory facilities in Konya, Turkei produce more than 1.000 kinds of spare parts and so far export to 35 different countries. Our Company's main goals are providing International standards, customer satisfaction, after sales follow-up. At quality department each part specifically controlled by Quality Control Engineers before delivery experienced engineers. Therefore, we believe that Yoncalik Spare Parts increases the productivity as well as the performance confirming EU Standardsâ?? with competitive prices. YONCALIK Casting-Spare Parts LTD.STI
Yoncalik Casting - Concrete Spare Parts LTD is a leading company of producing well-known companies such as (Putzmeister, Schwing, Cifa, Sermac, Junjin, etc.) and Truck Mixers (Imer, Stetter, Baryvall, Intermix etc.) Besides that we produce our own Concrete Pump and Truck Mixer Spare Parts, Batching Plant Spare Parts, Cement Truck Cement Parts but we also sell genuine spare parts by offering attractive prices Over the 17 years of experience Yoncalik Casting Co. has two factory facilities in Konya, Turkei produce more than 1.000 kinds of spare parts and so far export to 35 different countries. Our Company's main goals are providing International standards, customer satisfaction, after sales follow-up. At quality department each part specifically controlled by Quality Control Engineers before delivery experienced engineers. Therefore, we believe that Yoncalik Spare Parts increases the productivity as well as the performance confirming EU Standards with competitive prices.
MODELING YONCALIK has the advantage of short time pattern making for its customers: New projects will be implemented shortly. As a result, sample production takes less time compared to other foundries. We can produce patterns according to technical drawings, customer samples and 3D Data. Suppliying of 3D files from customers reduced our pattern production time. In patternmaking there are many options as raw material. Pattern material is chosen according to the quantity of parts. (Small quantity, medium quantity and large quantity) The patterns are manufactured according to samples or drawings by wood, epoxy or Alminum. Our customer patterns then stored with begin of serie in our foundries
MACHINING Our Company YONCALIK is dealing with the machining of metal parts such as cutting steel, hardened steel, brass, bronze, cast iron, ductile iron and cast steel .Following operations are performed in our factory; turning, milling, grinding, drilling, gear cutting, sheet metal forming, pressing, pre-assembly, final assembly Maximum workpiece size of the machined parts are as below; CNC turned parts Machining Dia 225 mm ,Turning Leight 1000 mm Machining Dia 380 mm , Turning Leight 500 mm Universal Turned Parts Machining Dia 710 mm , Turning Leight 2000 mm CNC Machining Dia X=1060 mm, Y=610 mm, Z=610 mm , a=300 mm,b=300 mm We have invested for 5 achs CNC Machine For even larger workpiece dimensions, we are ready with our subsidiaries to make cooperation to answer our customer requests.
Fresh vegetables, construction materials, food products.Global trading
Grain, drilling equipment, construction materials .
