1-Double heating elements with thermostat.Heating elements made of noncorrosive.
2-Yoke foot.
3-2000 watt
4-Guaranteed for 1 year.
5-Fibre framed machine(dielectric and heatproof fireproof light and shockproof)
5-Welding machine 50-125mm(capable of welding the pi diameters up to 5 inch)
Ability of simultaneous cutting the two corners of pvc and aluminum profiles at the same time.
The machine is computerized, finding the measure and cutting automatically.Has a memory for cutting by sensitivity of 0, 2mm and unit stopper.
Right head is constant and only left head is flexible.
Possibility of one head cutting when needed.
There is hydro-pneumatic system and it is possible to cut at desirable speed without vibration
Diamond saws diameter is 420 mm.
Capable of cutting at 45-90 v45 degrees and interval degrees.
Flexible head can be moved millimetrically.
Width 4000 mm
Depth 800 mm
Height 1500 mm
Voltage 400 v 3 npe
Frequency 50 hz
Total power 3.5 kw
Air pressure 6-8 bar
Air consumption 70 lt. / min
Max. Cutting profile lengths 4000 mm
Min. Cutting profile lengths 300 mm
Machine weight 800 kg
Standard machine color ral 7032
Product name
62S Plus Fusion Splicer
Model No.
62S Plus+ WITH CT-08
Dimensions
46 W x 159 D x 150 H (mm)
Cladding Diameter
80 to 150 microm
Power Supply
100 to 240 V AC
Wind Protection
Maximum wind velocity of 15 m/s (34 mph)
Weight
2.5 Kg
Coating Diameter
100 to 1000 microm
Fiber Cleave Length
5 to 16 mm
Splicing Modes
100 preset and user programmable modes
Product Keywords
Traditional Core Alignment with the 62S+ Fiber Splicer
The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars.
For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin.
We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).
"* Power ON self-test (POST). when machine switched on , the system does full inspection and testing on welder conditions, that protect components especially key components like IGBT, diode , capacitors , circuit board, etc .
* Full functions with thermal protection , over load protection , anti-stick , arc force , VRD .
* Suitable for a wide range of voltage from 160V-260V .
* Energy saving . if the welder not in use for few minutes , the welder will automotically swtich to sleep mode . if still not use after sleep mode , the welder will swtich off automatically .
* Can be used to welder acid electrode rod and alkaline (basic ) electrode rod .
* Accessories 200A electrode holder+16mm*1.6M 200A earth clamp+16mm²*1.3* CABLE CORD SIZE / LENGTH: 3*1.5mm² , OUTSIDE 1.6M ;VDE euro two pins plug COPPER CABLE
* Output cable size/length: 16mm²*1.6M 16mm²*1.3M
* DUTY CYCLE: 60%
* Usable electrode (mm): 1.6-4.0mm
*FREQUENCY: 50/60Hz
* VOLTAGE: AC 160-260V
* Output current range (A): 20-300
* POWER: 5.5KW
* CE Standard
"1.Power ON self test (POST). when machine switched on , the system does full inspection and testing on welder conditions , that protect components especially key components like IGBT , diode , capacitors , circuit board , etc .
2. Full functions with thermal protection , over load protection , anti-stick , arc force , VRD .
3. Suitable for a wide range of voltage from 160V-260V . 50-60 Hz
4. energy saving . if the welder not in use for few minutes , the welder will automotically swtich to sleep mode . if still not use after sleep mode , the welder will swtich off automatically .
5.can be used to welder acid electrode rod and alkaline (basic ) electrode rod .
Accessories 200A electrode holder+25mm²*1.6M
300A earth clamp+25mm²*Brush
6.Product power: 6.5 KW
Output cable size/length: 25mm²*1.6M 25mm²*1.3M
CABLE CORD SIZE / LENGTH:3*2.5mm² , OUTSIDE 1.6M ;VDE euro two pins plug COPPER CABLE"
T.K. 551 - Corner Welding Machine
Makes corner welding of PVC profiles.
Full electronic and full electro-pneumatic system
Fully automatic and program controlled.
Single table movable system
Adjustable welding angles between 30 â?? 180 degrees
Digitally adjustable heating and holding times
Adjustable welding and profile pressure
Clamps the profiles one by one at each press of the foot pedal
Fault warning system.
Low energy and air consumption
Technicial Specifications
Voltage
220 V
Frequency
50-60 Hz
Total power
2,5 Kw
Air pressure
6 Bar
Air Consumption
12 lt/min
Dimensions (mm)
660 x 660 x 1420
C.K.K. 552 - Double Head Welding Machine
Welds two corners of PVC profiles
Adjustable welding pressure and profile clamping pressure.
Fully automatic and program controlled.
Has separate digital timing control for melting and cooling
Technicial Specifications
Voltage 220 V
Frequency 50 Hz
Total power 4,5 Kw
Air pressure 6 Bar
Air Consumption 70 lt/dk-min
Dimensions (mm) 890 x 4010 x 1720
Weight (Kg) 475
Exothermic welding is a molecular connection which is the most efficient way to create a high-quality electrical connection. It minimises corrosion in underground conductor connections which brings problems such as loosening and separation and maximises the life and quality of grounding.
The price will be determined according to the order amount and the order date. We have 2 factories in Turkey and in Canada. We will ship the products according to the region.
High-tech machinery park, raw material quality & special formulas are able to produce special roller coating process and polyurethane parts from polyurethane elastomer.
Material Specifications;
STRONG AGAINST ABRASION
RESISTANT TO PRESSURE, STROKE & IMPACT
RESISTANT TO HYDROXIDE SOLVENTS
RESISTANT TO OILS
CAN BE APPLIED AS ANTISTATICALLY
Sectors Used;
TEXTILE
WOOD AND FURNITURE
IRON STEEL & GALVANIZED
PRINTING PRESS
MINE
PAPER
CORRUGATED CARDBOARD
