General KYN28A-12 type metalclad withdrawable switchgear is a complete set of three phase AC indoor device and applicable to the singlebusbar and single busbar section power system of which the rated voltage is 3.6 to 12 kV,the reated frequency is 50/60Hz,Having perfect"five prevention"function,Used for power reception and power distribution,the device is mainly used in power plant,transformer substation,industrial and mining enterprises and high building,Having the function of controlling,protecting and monitoring the circuit. Standards: - KYN28A-12 switchgear meets the following domestic and international standards: IEC62271-200, GB3906, GB/T11022, DL/T404, etc.. Working condition: Normal working condition Ambient temperature: - Maximum temperature +40 C - Average value is no more than +35 C - Minimum temperature -15 C Ambient humidity - Daily average relative humidity of 95% and below - Average relative humidity of 90% and below - Maximum altitude of 1000 meters of the place of installation - Earthquake intensity is not more than 8 degrees, there is no fire, explosion danger, serious pollution, chemical corrosion and violent vibration. Technical data:
Metal Clad Switchgears SETAS Metal Clad Switchgears are switching and control cubicles manufactured between 1 kV 40.5 kV comply with IEC 62271-200 standards. SMC series Metal Clad Switchgears are defined with following features according to IEC 62271-200 standards. 3mm sheet steels LSC 2B class Loss of Service Continuity Pm Partition Class AFLR Internal Arc Classification 4 earthed accessible compartments Maximum personnel safety with 31.5 kA/ 1 s internal arc test. Safety electrical and mechanical Interlocking systems. Withdrawable type Vacuum / SF6 Circuit Breaker for fast and easy servicing General Production Range and Specifications Rated Voltage : 3.640.5 kV Power Frequency withstand Voltage : 1085 kV Lightening Impulse withstand Voltage : 40185 kV Rated Frequency : 50/60 Hz Rated Current ( natural ventilation ) : 6303150 A Short Circuit withstand Current : 1631.5 kA ( 3 s ) Internal Arc withstand Current : 1631.5 kA ( 1 s ).
SME series Metal Enclosed Switchgears are defined with followwing features 2 mm sheet steel LSC 2A Loss of Service Continuity Pl Partition Class AFL Internal Arc Classification 3 earted accessible compartmments Maximum personel safety with up to 25 kA / 1s internal arc test Safety electrical and mechanical Interlocking systems SF6 gas insulated Circuit Breaker allows fast and easy servicing Grounding systems with ensured continuity. General Production Range and Specifications Rated Voltage : 3.640.5 kV Power Frequency withstand Voltage : 1085 kV Lighting Impulse withstand Voltage : 40185 kV Rated Frequency : 50 / 60 Hz Rated Current : 6301250 A Short time withstand current : 16/20/25 kA ( 1 sec ) Internal Arc withstand Current: 16/20/25 kA ( 1 sec ).
PVC, Aluminum and Stainless Steel profiles used for tiling purposes such as covering the edges of columns, steps and in between floor tiles. Bars of 250cm length and in different widths.
Profiles... Plastic profiles.
Square edge profile rondcube is thealuminium edging profile for modern design of outside corners as well as providing a perfect protection for edges. The square shape provides a perfect right-angle finish. Square edge design matches protection and decorative solution thanks to a long-lasting beautiful appearance of its metal colours, old style copper, height tech titanium and metal finishing effect, brushed and chromed. Square edge rondcube is available into aluminum and stainless-steel. Available into 10, 12, 5 mm height and into 2, 50 mt length. Aluminum square edge rondcube is treated against corrosion by anodic oxidation and subsequently colored by anodic dye bath. Fully resistant against atmospheric agents even if used outdoors and against scratches and blows.
Second hand solar panels.
Solar panels.
Solar Panels.
stock solar panels.
solar panel.
Solar Panel.
Electrical insulation fiberboard.
Acoustic panels and skirtings.
Aluminum extrusion composite panel fiberglass.
Heating area - up to 3 sq.m. Weight - 3 kg Dimensions - 750mm x 130mm x 14mm Power consumption - 157 Watt Manufacturer Warranty - 5 years Electric skirting panels warm up walls and help eliminate mold, fungus, moisture, and condensate in rooms that usually have cold corners or cold external walls. Heating such a room with an ordinary oil-filled radiator, electric water boiler, or electric fan heater will not solve the problem. Three different models of UDEN-S skirting panel heaters range between 100W, 150W, and 200W in power capacity. They can be used not only as a stand-alone heating system but also combined with other UDEN-S heaters for efficient heating and a comfortable feeling in the room. Beautifully designed, our skirting panel heaters are only 13cm in height and only 14 mm in thickness. They come in white color as standard but a customer can order any color from our rich palette (over 100 colors and shades) that will match the customer's interior.
Heating area - up to 4 sq.m. Weight - 3.5 kg Dimensions - 998mm x 130mm x 14mm Power consumption - 200 Watt Manufacturer Warranty - 5 years Electric skirting panels warm up walls and help eliminate mold, fungus, moisture and condensate in rooms that usually have cold corners or cold external walls. Heating such a room with an ordinary oil filled radiator, electric water boiler, or electric fan heater will not solve the problem. Three different models of UDEN-S skirting panel heaters range between 100W, 150W, and 200W in power capacity. They can be used not only as a stand-alone heating system but also combined with other UDEN-S heaters for efficient heating and comfortable feeling in the room. Beautifully designed, our skirting panel heaters are only 13cm in height and only 14 mm in thickness. They come in white colour as standard but a customer can order any colour from our rich palette (over 100 colours and shades) that will match the customer's interior.
Grade: A/A, A/B, B/B Wood - pine and linden Joint - finger joint quantity - up to 200 m�³/monthly Work with: EXW, FCA, DAP Thickness 15 mm 45 mm Width: 200 mm 900 mm LENGTH: FROM 500 up to 6000mm Available 2 layers panel up to 6000mm
Aluminium Composite Panels, we have B1, B2 and A2 classes of production and have also been certified by SGS. Also our ACP coatings are under guarantee of HYDO as we use Hyro coated Aluminium Sheets on our products.
Aluminium Composite Panels, we have B1, B2 and A2 classes of production and have also been certified by SGS. Also our ACP coatings are under guarantee of HYDO as we use Hyro coated Aluminium Sheets on our products.
