European Industrial And Automotive Suppliers and Manufacturers

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter

1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.

Bacoban DL Alcohol-free disinfection and cleaning of medical fittings and equipment and other surfaces (in accordance with Directive 93/42/EEC: MDD). The product conforms to British Standards under ISO standards DIN EN ISO 13485:2010; DIN EN ISO 9001:2008; DIN EN ISO 10993-1; DIN EN ISO 14971:2007; and EN 14885. Bacoban is a disinfectant product produced in Germany by Ropimex R Opel GmbH. Its certifications are under the Disinfectants Commission in the Association for Applied Hygiene (VAH) in collaboration with the Scientific Societies and Professional Associations DGHM, DGKH, GHUP, BVÃ?GD and BDH tested according to the DGHM Standard Methods for Testing Chemical Disinfection Processes and deemed to be effective for prophylactic disinfection and hygienic handwash. Does not contain Aldehyde or Phenol. Microbiological effectiveness Bacoban DL is effective against: bacteria, fungi, viruses (hepatitis B and C, HIV, influenza including H5N1and H1N1, Rotaviruses and adenoviruses), and as listed on the page 'Infections that Bacoban kills'

We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).

Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

Stearic acid is a saturated fatty acid that plays a crucial role in various industries, including cosmetics, pharmaceuticals, and the production of candles and soaps. It is recognized for its waxy, solid form at room temperature and its versatility as an ingredient. In the cosmetics and skincare industry, stearic acid is commonly used as an emulsifying agent, thickener, and stabilizer in creams, lotions, and cosmetics, imparting a smooth texture and improving product consistency. In the manufacturing of candles and soaps, it acts as a hardening agent, enhancing the durability and structure of these products. Stearic acid's multifunctional properties make it an integral component in numerous consumer goods, contributing to their quality and performance.

Magnesium oxide, often referred to as magnesia, is a white, odorless, and alkaline solid with the chemical formula MgO. It is recognized for its diverse applications across industries. In healthcare, it is used as an antacid to relieve heartburn and indigestion, as well as a magnesium supplement. In the construction sector, magnesium oxide is utilized as a refractory material in kiln linings and as a fireproofing agent in building materials. It also plays a role in metallurgy as a refractory lining material for furnaces. Additionally, magnesium oxide finds application in the production of electrical insulators, as a catalyst in chemical processes, and as a stabilizer in some food products. Its ability to withstand high temperatures, neutralize acidity, and serve various functions highlights its importance in different industrial and consumer applications.

Polyacrylamide is a synthetic polymer composed of acrylamide monomers and is widely used in various industrial, environmental, and scientific applications. It comes in various forms, including powder, liquid, and gel. In water treatment, polyacrylamide is employed as a flocculant and coagulant to separate and remove suspended particles and impurities, aiding in the purification of drinking water and wastewater treatment. Additionally, it plays a crucial role in the petroleum industry for enhanced oil recovery and in agriculture for soil conditioning and erosion control. In the laboratory, it serves as a gel for electrophoresis in DNA and protein analysis. Its versatility in facilitating solid-liquid separation and its ability to modify the rheological properties of fluids make polyacrylamide a valuable polymer in a range of practical applications.

Oxalic acid is a colorless, crystalline organic compound with the chemical formula H2C2O4. It is naturally found in various plants, particularly in foods like spinach and rhubarb, and serves as a common component in some household cleaning products. Oxalic acid has versatile applications, most notably as a rust remover and stain cleaner for metal surfaces. In addition to its cleaning properties, it is used as a reducing agent in certain chemical reactions and as a mordant in textile dyeing. However, it should be handled with caution as it can be toxic when ingested in large quantities. Its ability to effectively remove stains and its role in various chemical processes make oxalic acid a valuable compound in both household and industrial settings.

Magnesium sulfate, commonly known as Epsom salt, is a chemical compound with the formula MgSO4. It is a versatile mineral compound used in various applications. In agriculture, magnesium sulfate is employed as a fertilizer to correct magnesium deficiencies in soil, promoting plant growth and health. In the medical field, it is used as a laxative and in certain medical treatments for conditions like eclampsia and pre-eclampsia during pregnancy. Additionally, Epsom salt is popular in personal care and wellness practices, where it is added to bathwater for its potential muscle-relaxing and soothing properties. Its multi-purpose utility in agriculture, healthcare, and relaxation underscores its significance in different aspects of everyday life.