Fencing Made From Electro-welded Plastic-coated Wire With A Triple Selvedge. The Vertical (linear) And Horizontal (crimped) Wires Of The Electro-welded Mesh Are Made In Zinc Coated Steel.
25 M Rolls On Pallets Wrapped In Recyclable Polyethylene Film
Brief Introduction of Wire Mesh Cable Tray Systems:
These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits.
Features and Benefits of Wire Mesh Cable Trays:
1. Electroplated Zinc Finish
2. Fast Easy Installation
3. Mesh Design Allows Cable Exit or Entry at any point
4. Clear Cable Identification
5. Supplied in 3 Metre Lengths
6. Significant Cost Savings Compared to Standard Tray Products
7. Simple Creation of Fittings on Site
8. Wide Range of Sizes
9. Heights Shown are Internal Dimensions
Manufacturing:
Optional Material for wire mesh cable tray: Black Steel, Stainless Steel, Aluminium, Alloy, Fibreglass Reinforced Plastic (FRP)
Mode: Top curved / Top Straight
Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated.
Color: Optional
Suggestions:
1). MATERIAL
The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed.
2). SURFACE FINISH:
A). Zinc-plating cable trays are suitable for indoor use. The place where cold zinc-plating cable trays would work should be dry, ventilated, and corrosion free.
B). Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays.
C). Powder-coated cable trays should be carried out in alkali and salt corrosion free site.
D). Pickled & Passivated should be used to stainless steel wire trays.
Specification for power and communications cabling containment.
1). SCOPE
Steel Wire Cable Tray conforming to the material and performance of this specification.
2). GENERAL
A). Cable tray shall be manufactured from steel wires, welded together and bent into final shape prior to surface treatment.
B). Surface Treatments:
i). Electro zinc plated to BSEN 12329-2000 for interior use (level 2)
ii). Hot Dipped Galvanised with between 60 and 80 microns of zinc to BS 729.
iii). Stainless Steel AFNOREZ CND 17.2 (AISI 316L)
C). Steel Wire Cable Tray Widths & Depths
i). Cable Tray dimensions are all internal.
ii). Depths of 30mm, 54mm, 80mm, 105mm & 150mm
iii). Widths of 50mm, 100mm, 150mm, 200mm, 300mm, 400mm 450mm, 500mm & 600mm for depths of 30mm & 54mm.
iv). Widths of 100mm, 150mm, 200mm, 300mm 400mm & 500mm for Depths of 105mm & 150mm
All trays are of 3005mm long
3). SPECIFICATION
a). Steel Wire Cable Tray will be produced from lateral and longitudinal sidewall steel wires, with minimum diameters of -:
4 mm for trays of widths up to 150mm
4.5 mm for trays of widths of 200mm
5.0 mm for trays of widths of 300mm
6.0 mm for trays of widths of 400mm, 450mm, 500mm and 600mm
b). Trays will be manufactured with a longitudinal 'T-welded' safety edge along the top wire of the sidewall (excluding CF3050)
c). Trays will be constructed with a 50mm x 100mm mesh configuration.
d). All tray fittings (e.g. changes in direction, level and size) shall be constructed on site, to the manufacturers instructions, using side action bolt croppers and fastened using 25mm and 30mm counter clamps with M6 bolts and nuts, all surface treated as the tray.
e). Trays will be coupled together using either a fast spring coupler or a 25mm/30mm counter clamp combination with supporting lateral splice plate on trays over 300mm width. The coupling will have the same surface finish as the tray.
f). Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer.
g). All welds will be manufactured to an average minimum tensile strength of 500Kg per weld.
4. TESTS, CERTIFICATION AND CONFORMITY
a). Loading and deflection characteristics of the tray should be tested and the results published in accordance with the European Standard CEI/61537.
b). Suitability for the support of Cat6 data cabling should be demonstrated by way of independent test verification.
c). Fire test certification should be published in accordance with the E30/E90 standard.
d). Electrical continuity across a coupling should be demonstrated by means of a published test method and result.
We are able to design styles in various specifications according to the drawings and/or samples by the clients. And we offer fair price, excellent quality, quick delivery, continuous improvement. We own customer satisfaction. You can trust on us that we are the leading manufacturer of cable trays.
According to the receiving orders from our customers collers (min 50kg-max. 1500kg) can be put of for sale with the preferred diameters and surface finishing characteristics such as; bright, extra bright, copper-plated, galvanized, annealed, annealed skin-passed, zinced, chrome plated and phosphate plated.
Technical and mechanical charecteristics: according to uni 3823/din/17223/eni 2701 norms
Production range: diameters from mm 1.50 to mm14.00
Applications:
This type of products lends itself particularly to the manifacture of
Grills and baskets for fitted kitchens
Grills for domestic appliances
Household articles
Supermarket trolleys and baskets
Promotional display units
Bird and pet cages
Omamental chains
Articles fort he car industry..Etc
There are different sizes and sections for special profiles by the specialized methods such as turks heads and wire flatting. Together with the ordinary roun sections. Gunes wire also manufactures square, hexagonal, octagonal, triangulari rectangular, oval, half-oval, half-rounded, keystone, peeled round bars, ground bars and flat shaped sections and various sizes.
Diameter of wire: 1mm-20 mm
Packages: bunches
Weight: 25 kg-1000 kg
Proporties:
Possible to produce with any surface characteristics and with preferred rigidity.
Plating:
Hot galvanized or cold heading wire
Applications:
This type of product lend itself particularly to the manufacture of
For domestic appliances
Accesories of lighting products
Key and lock apparatus
Household articles
Metal nets/meshes
Curtains-venetian blind miles etc
According to the receiving orders from our customers all type of bars can be straighten and
Cut in respect of our customers diameter and length preferences. Gunes wire is continuing also to serve with the wire and tube surface grinding and polishing wire works from 4.00 mm to 80 mm diameters. Our wire straightening and cutting machines are suitable for ferrous, nn-ferrous anf high tensile wires(from 1.50 mm to 14.00 mm)
Production range:
Diameters from mm1.50 to mm14.00 and lengths from 20 mm to 4500 mm
Applications:
This type of product lends itsef particularly to the manufacture of
Grills and baskets for fitted kitchens
Grills for domestic appliances
Household articles
Supermarket trolleys and baskets
Promotional display units
Bird and pet cages
Omamental chains
Articles fort he car industry..Etc
Reinforced mesh is a kind of general purpose metal constructions used for reinforcement of construction projects, protection against mechanical damage and to ensure long-term and trouble-free building operation. ... Reinforcing mesh is made of class AI and AIII rebars and low-carbon indented steel wire.can be made in any size you want.
For automatic and mechanized welding and surfacing of carbon and low alloy structural steels.
Shielding gas types: carbon dioxide, argon and mixtures of carbon dioxide and argon, submerged arc welding.
Coil 1 - 15 kg, diameter from 0.8-2.0 mm, EN ISO 14341:2020
Wire grades Sv-08G2S and Sv-08GS are used in shipbuilding, car building, boiler building, installation work, construction for welding metal structures, the automotive industry, and agricultural engineering.
Chemical composition, % (steel grade Sv-08G2S)
Manganese: 1.80-2.10; Carbon: 0.05-0.11;
Silicon: 0.70-0.95;
Chrome, no more: 0.2;
Nickel, no more: 0.25;
Sulfur, no more: 0.025;
Phosphorus, no more: 0.03.
Produce from 0,8mm, 1mm, thickness galvanize steel profile.
Resistant against expolsive materials and strike.
Through its micro perforations can be preferred in places which showcase is important.
It can be painted to all Ral Colours through catalogue.
The price shows dollar/running meter
we can supply following following Products : PVC Coated Tarpaulin ,PVC Coated Digitex ,PVC Coated Mesh
,PU Coated Digitex
,Frontlit
,Backlit
,Blockout
and some other technical coated Textile Fabrics.
Format :
Different GSM ,Roll- Widths, Colors available .
Our products are made made of supreme quality materials under high-tech Coating Process .All Made in Germany.
PRIME STOCKLOTS AND B-GRADE STOCKLOTS:
Apart from our Prime Materials we can also offer B-Grade Stocklots of the same materials.
Kindly send us an email or a Message on this Portal
1. Your Application (Banner Printing , Tent Manufacturing , TruckCover ,etc.)
2. Contact Details of your Company
3. Destination (Port )
We are looking forward to offer you a suitable Product from our Portfolio.
