CMM-12R is designed for extension of transformer service life by restoration of dielectric strength and chemical composition of electrical insulation oil. In the process of oil regeneration, decomposition products and acidic compounds are removed, the oil is clarified, its oxidation stability is improved, and gas solvency is reduced. The unique feature of the CMM our units is the ability to regenerate transformer oil directly in a transformer with the transformer either online or offline. The functions of the unit: *Oil regeneration; *Thermal vacuum drying of oil; *Vacuum treatment of transformer; Such regeneration of oil is capable of removing sludge from paper insulation and capturing it with the sorbent. One of the advantages of the regeneration unit is the use of Fuller`s earth sorbent, which can be reactivated many times. This gives the unit the capability to process oil continuously without stops to change saturated sorbent. Even after the sorbent is completely exhausted after 1.5 to 2 years of use, it is completely environmentally safe and can be used as a filler for construction materials and mixes. The CMM 12 our unit is controlled by a computer with special status software. The scanner control system offers the operator full control of all components. The operator can control the equipment, switch to various modes of operation, monitor sensor indications and access event flow. As requested by clients, the CMM-12R can be controlled remotely via the internet. If GlobeCore assistance is required, we can simply connect to the unit through the internet and monitor the entire operation process - if there is a problem, we will see it. Many of our clients purchase equipment for operation in unstable climates, explosive environments and even at sea. The CMM units can be manufactured in various optional designs. The most popular and convenient design is placement of the unit on a one or two axle trailers - this trailer has a metal frame covered with metal sheets and is equipped with an operator room.
Dear Sir / Madam, I have SCO to secure buyers for Nigerian crude oil as per the terms below: Delivery CIF/FOB/TTT/TTO: ASWP [Any Safety World Port] Inspection: SGS or Equivalent Financial Instruments: Buyer issues [SBLC/DLC/BLOCK FUND] via MT760/MT700/MT799 Payment Term: 100% Payment via Wire Transfer / MT103, upon Successful Q&Q Commission: USD$4:00 ($2:00 to Seller side and $2:00 to the Buyer side) (Full SCO document shall be given to genuine buyers upon request) In addition, we also need trusted refineries for Our client based in Africa for huge capacity refinery capable of refining industrial - scale volumes of crude oil per day, in order to satisfy domestic markets and consumers. We are convinced that our invitation is in line with current drive by refineries globally to reach cross - border export markets and, we intend to synchronise effort with you, towards achieving your goal in this direction. Expected duration of contract shall be between 18 to 24 months while financials will be competitive for scope of engagement. If interested, you are hereby requested to submit your expression of interest, mandate, profile, proof of viability, evidence of best - practices and environmental friendliness, to enhance our due diligence, after which successful applicants are sent a non - disclosure agreement and then, invited to clientâ??s base for pre - contract meetings, which should then culminate in the signing of contracts to enable activities commence in due course. However, you are kindly advised to note that all processes preceding the actual project activities shall be very fast - paced, in order to quickly commence production and cope with the trending market dynamics in clientâ??s home country in Africa. We shall be hoping to receive all the afore - mentioned requirements from you at your earliest convenience.
We Can Supply Monthly Up To 2.000.000 Bbr Crude Oil Please Real Buyer Contact With Icpo Thanks
I sell .+ *3/8/0*5*0/0-6*1- 5*4-1/7 BR Alex aviation kerosene JP54, There are also A1, Diesel D2, D6, M100, Crude oil light, all types of gasoline, LNG, LPG. Prices below Platts. Payment L / C, FOB, CIF.
Specifications: As Per Attached Origin: Nigeria Cargo Size: 1.000.000 Bbl To 5.000.0000 Bbl As Per Annual Contract Quantity: 1.000.000 Bbl To 5.000.0000 Bbl Per Month, One Year With R&e Delivery Terms: Cif Pod, Or Fob Bonny Terminal Or TTO Ghana, International Waters. Surveyor: Sgs Invoiced Quantity: As Per Quantity Report Provided By Third Party Inspection Company Price :. To Be Agreed With Buyer As Per Delivery Terms. (see Down Below) Payment Terms : Sblc And Mt103 Preferably.
Refined Sunflower oil, Crude Sunflower oil, Vegetable oil, Extra Virgin olive oil, Refined corn oil, Refined soyabean oil, Crude soybean oil, Rbd palm oil, Refined canola oil, degummed rapeseed oil, Peanut oil, Mixed oil, used cooking oil & crude jatropha oil.
- Bitumen 60/70 - Bitumen 85/100 - Bitumen 40/50
Light & Heavy curde oil made by persingolf
Base Oils The American Petroleum Institute (API) has categorized base oils into five categories (API 1509, Appendix E) and Charin Energy is active in the supply of each of these categories. The base oils from groups I, II and III are all refined from petroleum crude oil while polyalphaolefins (PAO, Gr. IV) are fully synthetic oils. We also offer all other base oils which belong to group V as well as supply low viscosity base oils and other speciality oils such as process oils & white oils.
Additives are organic or inorganic compounds that lube oil blenders’ mix with base oils to achieve any or a combination of the following; Enhance existing base oil properties with antioxidants, corrosion inhibitors, anti-foam agents and demulsifying agents. Suppress undesirable base oil properties with pour-point depressants and viscosity index (VI) improvers. Add new properties to base oils with extreme pressure (EP) additives, detergents, etc. In the additives segment, Charin Energy constantly identifies innovative additives that we introduce to customers as a value added to their product blending activities. Charin supplies additives within the following functional categories:- Antioxidants, Friction Modifiers, Antiwear, Corrosion Inhibitors, Viscosity Index Improver, Extreme Pressures, Antifoam, Detergents, Dispersants & Emulsifiers, Solvents, Demulsifiers, Rust Preventatives, Packages
We, as ABSPetroleum Co. hereby, issued this Offer and Looking for buyer of BITUMEN 60/70, 80/100, 85/100 EN22203816861 W.P.T Co. Trial Quantity: 50,000 Metric Tons Contract Quantity: 200,000 Metric Tons Product Price Per MTS Gross USD$: 330 / Net USD$: 320 Commission Structure: 10$ PER MTS (Buyer Side/Seller Side (50%/50%) Delivery/Destination: FOB- BANDAR ABBAS PORT / IRAN, STORAGE TANK Method of Payment: L/C, T/T, PayPal, Other For future information please send us your inquiry along with you L.O.I (Letter Of Intent)
We, as ABSPetroleum Co. hereby, issued this Offer and Looking for buyer of RUSSIAN Export Blend Crude (REBCO) GOST 51 858-2002 Trial Quantity: 2,000,000 Barrels Contract Quantity: 5,000,000 Barrels Product Price Per BBL Gross USD$: 50 / Net USD$: 48 Commission Structure: 2$ PER BBL (Buyer Side/Seller Side (50%/50%) Delivery/Destination: FOB-ROTTERDAM, STORAGE TANK Method of Payment: L/C, T/T, PayPal, Other For future information please send us your inquiry along with you L.O.I (Letter Of Intent)
We, as ABSPetroleum Co. hereby, issued this Offer and Looking for buyer of RUSSIAN ESPO Crude Oil Trial Quantity: 2,000,000 Barrels Contract Quantity: 5,000,000 Barrels Product Price Per BBL Gross USD$: 50 / Net USD$: 48 Commission Structure: 2$ PER BBL (Buyer Side/Seller Side (50%/50%) Delivery/Destination: FOB-ROTTERDAM, STORAGE TANK Method of Payment: L/C, T/T, PayPal, Other For future information please send us your inquiry along with you L.O.I (Letter Of Intent)
Product Description: Export Blend Crude Oil Product origin: Russia Key Specifications/ Special Features: Provided on Request Minimum Order Size And Packaging Details: 100,000 BBL
Product Description: BLCO Product Origin:Provided on Request Key Specifications/ Special Features:Provided on Request
Product Description: Liquefied natural Gas (LNG) Product Origin: Russia Key Specifications/ Special Features: Provided on Request Minimum Order Size And Packaging Details:50,000 MT
Product Description: Liquefied Petroleum Gas (LPG) GOST: 20448-90 Product Origin: Russia Key Specifications/ Special Features: Provided on Request Minimum Order Size And Packaging Details: 10,000 MT
Product Description: Russian Bitumen/Petroleum Asphalt 60/70 Product Origin: Russia Key Specifications/ Special Features: Provided on Request Minimum Order Size And Packaging Details: 10,000 MT
We offer a variety of standardised bitumen for shipping: 50/70, 60/70, 70/100, 100/150, 160/220. Please, ask for more bitumen penitrations. Available supply capacity from 20 MT/month up to 35 000 MT/month. Ask for prices
our Company have more than 5 years experience in the Metall and Oil Industry. We have maked many Projects in Oil Industry in Russia and have Contract with Producer in Russia for Oilproducts for Sell. We are Metall and Oil Trader represented in London and would like to cooperate with you in long term. We can realise you Oil Product only with the procedure from Seller. Letter of Credit Payment will be acceptable for any Banks and Countries. Details and procedure we send only for seriosly Buyer. 1. Step: Letter of Intent 2. Step: Soft Corporate Letter Sincerely Gennady Timm General Manager Anton Timm Manager
