85 x 217 cms 150 kg Portable, movable indoor & outdoor ice cream stand inclueded spagetti press
Specifications: H= 3-90 mQ= 5-550 m³/h Description: DESTINATION * Industrial water supply; * On the building sites; * In agriculture for irrigation; * As cooling-water pumps; * To increase the pressure in various industrial installations; * Clean o slightly polutted liquids of which temperature doesn't exceed 105°C; PARAMETERS: * FLOW 5-550 m³/h * TOTAL HEAD 3-90 m * TEMPERATURE max. 105 °C OPTIONS: * Special design for temperatures of the circulated liquid up to 130°C; * Internal-combustion engine driving; * Various manufacturing materials (Br,Al). * Various speeds of the driving electric motor: 750 rpm; 1000 rpm; * 60 Hz frequency; * Various voltage ratings: 220V; 380V/415V; 500V; * Various classes of insulation: E, F; * Various protection classes of the electric motor: IP54T3; EXD II CT4; ANTIGRI. * Various sealings materials; DESIGN: * Centrifugal mono-staged pumps with horizontal axle; * Axial suction; horizontal or vertical discharge; * Overhung mounted impeller; * Oil-bath lubrication; * Sealing with graphitized cord and stuffing box; ADVANTEGES : * Long life; * Easy assembly; * The steel base plate provides good vibration absorption; * Standard manufacturing materials; * Interchangeability of pump parts as well as of the pumps as part of the pumping machinery; MOTOR: * THREE-PHASE CURRENT: Speeds 1450; 2900; rpm Nominal power 0, 55-75 KW Voltage 220/380; 380/660 V Frequency 50 Hz Class of Insulation B Protection class IP54 ... Depending on the customer requirements.
Millma Square Plansifter main body is made of steel construction. Oscillation is performed from center of gravity by weight assembly attached from top and bottom parts. It enables to classify milled product cleanly and routinely owing to cycloid swinging body by centrifugal force and frames with various dimensions.
Millma semolina purifiers are used for the purpose of cleaning and classifying semolina in flour and semolina milling factories. Its sieves consist of double units and three layers. It is actuated by two vibro motors and equipped with in order to enable sensitive air adjustment. Sieves are cleaned by brushes against blockage. Brushers are operated by vibration.
Millma roller mills have huge power and capacity and they are produced using excellent engineering and labour. Models of single and double decks are available. Feeding screen is controlled as servo in order to keep the flow rate of flowing product and they supply non-stop feeding.
Good condition filtration press made ny German MSE Filterpress GmbH in year 1997. The press has 33 plates of size 630 x 630 mm, cace thickness 25 mm. Includes own hydraulic system and control cabinet. The equipment is manufactured by German MSE Filterpress GmbH, year 1997. Manufacturer’s type KFP 630-40-25K-MPN+DLMP. Structure is made on normal construction steel, plate size is 630 x 630 mm. The filter plates are pressed with single acting hydraulic cylinder with inbuilt hydraulic pump-motor. Product is fed in a central sludge feed inlet with flange connection and each pressing unit has its own outlet for the liquid filtrate which is them collected in one outlet channel. The cake will be disposed under the press. The unit has its own control panel attached to the equipment. Technical data: Manufacturer: MSE Filtterpress GmbH Year of manufacture: 1997 Manufacturers type: KFP 630-40-25K-MPN+DLMP Plate size: 630 x 630 mm Number of plates: 33 Cake thickness: 25 mm Hydraulic pressure: 380 bar max Filtration pressure: 15 bar.
The main description of the plant equipmet is: 1. Brew House Make & Capacity: Steinecker1995 -1999 5 brews/d, 450-500 hl/brew. for 7000 kg malt, 3850 Raw grain Cast-out quantity: 500 hl, 16,5° Plato 8 Brews/ 24 hours, annual capacity 0.85 Mhl Controls are based on Siemens S5 and S7 PCS with, Botec Control system, PC Windows 2000 (Steinecker) Laboratory yield = 97.1% (2.1.09 – 28.5.09, 837 brews) The Brewhouse was installed in 1996 - 1999 by Steinecker to a high standard of control and automation and it contains the following main equipment: Wet Conditioning Mill, capacity 20 tons/hour and it is fully overhauled 2008 Configuration, main characteristics: 1 wet mill plant: 20 t/h 1 mash tun kettle plant: V=550 hl 1 lauter tun plant: D=7200mm 1 weak wort tank: V=155 hl 1 pre run vessel: V=640 hl 1 CIP- water distributor brew/whirpool kettle hot wort max. 520 hl (1 brew / 5 hours) wort cooling 400 hl/h, 10°C - Mash Kettle, a jacketed vessel 550 hl - Enzyme Dosing pot and pump - Lauter Tun complete with spent grain tank and Pondorff pneumatic grains transfer. Tun capacity 814 Hl and diameter 7200 mm, Solids capacity of 7000 kg malt and 3850 kg raw grain. Complete with internal rakes and scrapers - Pre Run Vessel complete with internal heater , volume 640 hl - Wort Boiler/ Whirlpool, gross volume 757 hl net 520 hl - Wort Cooler with aeration – GEA supplied plate heat exchanger (YOM 1990) – rated at 450 Hl/hr cooling the wort from 95oC down to less than 10oC. Cooling achieved with brewing water and then chilled water. Aeration achieved by use of a sintered disc and static mixers, and controlled manually using mass flow meters - 2 Hop Pellet Tanks - 2 Hop Oil Tanks - Brewhouse Weak Wort Tank, volume 150 hl - Alfa-Laval Decanter, year 2008, capacity 100 hl / h - 2 Weak Wort Tanks, volume approx 80 hl each - Gypsum Tank, volume approx 40 hl - Wet starch tank – volume 100 hl - Spent Grains Silo - Spent Grains Drying System - Bulk Acid tank – plastic tank with integral bund and dosing pumps
Good condition GEA Westfalia centrifugal separator used for molasses removal from fermented beer. The equipment has patented HydroStop solid discharged system that can be adjusted precisely and reproducibly to the specific solids concentration requirements of the process. This beer separator has continuous and self cleaning separation process and in beer filtration application this separator eliminates the need to use kieselghur. Technical information: Manufacturer: - GEA Westfalia Germany Year of manufacturing: - 2002 Manufacturer's type: - SC 30-06-177 Capacity: - 4000 - 6000 liters / hour Electric drive: - 18.5 kW Bowl diameter: - 440 mm Bowl speed: - 7270 rpm Relative density of solids removed: min 1.4 kg/l Relative density of suspension: max 1.2 kg/l Particle size or removed solids: > 4.6 micron Centrifugable solids: - max 5% v/v Viscosity of free liquid: - 2.5 - 5.5
Our company produces all types of machinery required for cleaning, milling, handling and packaging cereals. Therefore we can provide turn-key plants for; • Wheat flour and semolina factories, • Corn flour and semolina factories, • Cleaning and milling systems for various crops such as barley, rye and oat, • Cleaning and milling systems for spices, • Cleaning legumes, • Cleaning seeds, • Grain silos, • Feed Mills.
Scrap Fishnet.
1-Automatic and manual adjustable roll space and reducer control 2-Hinged, covers which can be opened. 3-Cover Lock whiich can be opened 4-Independent feeding cylinders 5-Rolls mechanism and quick roll replacement 6-Rolls pulleys driven by belts. 7-Product ,inlet level control 8-Integrated control system (touchscreen panel) 9-Control of the product flowing through Rolls (option) 10-Thermocouple plc module (option) 11-Rotation speed control of feeding cylinders (option) 12-Rotation speed control of rolls (option).
Flour mill machinery, semolina mill machinery, turnkey mill, electricity system, diagram, storage, silo, wheat grinding, wheat cleaning, package.
It is used to classify the sub products in accordance with their participle size at every stage of milling and seperate different flour types per their qualities in the flour mills.
It is used in flour and semolina mill for separating wheat and other grains from stalk, straw, spike and other foriegn particular materials.
Milling machinery
Comfortable bean bags
Row independent sunflower seed and maize silage cutter attachment ma²zestar 206 / 208 Provides high capacity efficiency. That is an attachment mountable to the self propelled construction machines of various tractor manufacturers. It collects the cobs of sun seed and maize with disregard to the row. It could be adjusted according to the size of cob. It could be folded in case of transportation. It is independent of the row.
Combined maize silage rolling and wrapping machine lt master
Thecn²cal spefication 400 lt, a3/b85 pompa model, 3 membran sayisi, max pompa deb²t 55-81 lt, max pompa basinci 30-40 bar, 10 mt, mama sayisi 20 reach.
1.Black painted shovel - 20*30*40 cm Metal thickness - 2 mm Weight of the shovelÆs head û 0.92 kg 2. Black painted shovel û 25*25*38 cm Metal thickness - 2 mm Weight of the shovelÆs head û 1.06kg 3. Rakes: 9 teeth - width û 32 cm Tooth length - 6.5 cm Metal thickness û 2mm Weight of the rake without handle û 0.48 kg 4. Rakes: 12 teeth - width û 42 cm Tooth length - 6.5 cm Metal thickness û 2mm Weight of the rake without handle û 0.52 kg
