- Cement-based, high performance, elastic thin insulation plate adhesive mortar containing special chemical additives, which is preferred in places where the ambient temperature changes suddenly or where it is flexible. - High bonding strength - Ease of application SCOPE OF APPLICATION - Bonding of plates indoors and outdoors in buildings, - On surfaces such as concrete, plaster, screed brick
- Cement-based, one-component, ready-to-use plaster and repair mortar containing special particle size filler and chemical additives that increase product performance and workability. SCOPE OF APPLICATION - In the interior plastering and interior restoration works in the buildings - In providing a smooth surface before painting, ceramic coating, insulation - Filling fine cracks - In repairing the damaged surfaces such as poured, carved, broken, ruptured concrete, plaster and such - On surfaces such as concrete, gas concrete, ytong, briquette, brick, heat pumice, prefabricated concrete, - 1-5 mm application range.
Morter sec premesclat construction based on cement, sand and additius, Components - Ciment P�²rtland - Silica origin sand - Additiu. Continuous granulometry 0 a 2 mm Aigua de amassat % 13 â?? 15 % (aprox. 3,5- 4 litres per sac de 25 kg) Apparent density of morter endurit1800 kg/m3 aprox. Apparent density of fresh morter 1950 kg/m3 aprox. Medium compressive strengthâ?¥ 7,5 N/mm2 (with a consistency in the 175 �± 5 mm dust table Medium flexural strength â?¥ 3,0 N/mm2 Application time 45 â?? 60 minuts (depending on the support and environment) Application temperature between 5 �ºC y 35�ºC. Consumption 19,5 kg/m2 cm. aprox.
Construction PU Sealant is a one-component, low-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics. Possesses permanent elasticity. 25 % movement capability. No surface tackiness after full cure. Do not pick up dirt. No shrinkage. Cures bubble-free. Enhanced storage stability. No sagging Thixotropic. Can be applied with hand gun and tooled easily. Paintable.
Compose A Joint Usg Boral - Ready Mix Joint Compound All Purpose Joint Compound Is Usually Sold Pre-mixed. This Product Is Used For Almost Every Drywall Installation And Repair. Joint Compound Is Used To Finish Drywall Joints And Corners. It Provides Faster And Superior Performance In Joint Closure. It Is Also Useful For Repairing Cracks And Holes In Existing Plasterboard And Plaster Surfaces. You Can Save Time By Using Joint Compound Cause It Does Not Need To Any Extra Process. It Is Ready To Use. It Takes 6 To 12 Hours To Dry, Depending On The Humidity And Temperature. Turkey Is One Of The World's Leading Country In The Gypsum Resources And Production Of Gypsum. As Board And Wall Company; We Export Highest Quality Of Gypsum Powder And Joint Compound All Around The World. Megaturk Co. Ltd, Istanbul - Turkey
Facade with a clean design, but a relatively more expensive performance due to the specific requirements for the sealing gasket and weather conditions during installation Possibility for glazing up to 64mm Extremely good thermal performance uw> = 0.6 w / m2k
A new generation of facades corresponding to different types of construction and architectural solutions Possibility of glazing up to 56mm Extremely good thermal performance uw> = 0.6 w / m2k Very good waterproofing and noise insulation characteristics
Contact sales department
Tile leveling wedges : 5mm/250pcs/047USD-EXW 10mm/250pcs/1,10USD-EXW Tile leveling wedges eco : 100pcs / 1,45USD-EXW Brand name : ORBOFIX Origin : Made in Turkey Payment : TT, LC %30 in front at purchase, %70 before loading Whole Sale Price Minimum Order Quantity : 3000
Material :plastic, concrete Round conductor/flat tape range mm 8-10 Height / lenght mm 105 Diameter mm 130 Weight kg 1 Others warranty: up to 5 years
4-0mm powder size 6-0 Mass Patch Sand Size 8-5 mm and 11-7 mm Size 16-9 mm and 12-12 mm Size 17-35 mm and 40-23 mm
Pink Marble in Sheet QTY Per Container 20'' = 435 m2 Price/M2 - Eur 16,00
ANO-Step: The picture above is what we produce with dimensions width 155mm ,length 135 mm ,plug is 50mm and diameter is 25 mm . Product of origin : Greece Minimum order of steps are : 1500. And packaging is as request by customer .
Injectable mortar HIT-RE 500 V4/500 Features Ultimate performance and model code-compliant design for virtually any concrete-to-concrete and steel-to-concrete connections ETA assessment for anchoring inc. C1 and C2 seismic and ETA for rebar inc. fire and seismic The first epoxy mortar qualified according to EAD 332402-00-0601 for concrete-to-concrete connections rigid connections can now be designed and executed with post-installed rebars without splices according to the newest design method TR069 Suitable for the toughest jobsite conditions works even in diamond-cored, wet or underwater holes, extremely deep injections, large diameters and at temperatures down to -5 °C / 23 °F Improved bond strength in the most demanding applications such as cracked concrete and seismic C2 conditions Easier to specify and order use PROFIS Engineering to design baseplate connections and PROFIS Rebar to design concrete-to-concrete connections according to EC2, TR069 or the Hilti Design Method UKCA UKCA Products in this group are generally suitable for seismic loading. Products in this group have a published fire resistance rating. Products in this group are generally suitable for fatigue loading. Applications Structural connections with post-installed rebar (e.g. slab extensions, wall/column connections, stairs, foundations, etc.) Structural renovation of buildings, bridges and other civil works, retrofitting and re-strengthening of concrete members Anchoring structural steel connections (e.g. steel columns, beams, etc.) Fastening structural baseplates, including in cracked concrete and challenging seismic conditions Fastening in natural stone and wood, including GLT and CLT made from spruce, pine or fir Show all Technical data Approvals/test reports BZS/shock, ETA, Fire, Seismic Seismic loading Yes Fatigue loading Yes Fire resistance Yes PROFIS software Yes Clean-Tec No Storage and transportation temperature range 5 - 25 °C Shelf life from date of manufacture (at 23 °C and 50% relative humidity) 12 months
Used to prevent water leaks and fill cracks, polyurethane based, water reacting, one component solvent free .Semi flexible injection with closed cell structure foams
Construction machinery and equipment
SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry for reinforcing concrete(Express way; office building, Bridge etc) Transportation By sea(20' 40' container, In different countries, rebar is produced based on different standards, and in each standard, there is a definite classification in relation to the mechanical properties of steel,
Standard or specially different machinery Capacities per shift between 2.000 to 30.000 pcs Brick output Sample brick insizes 250x120x65mm Solid or hollow Mixing ratio % 100 soil %7 cement and water
DPM High Pressure Polyurethane Dosing Machine is suitable for different applications (automotive, construction, white goods etc.). The machine has 2 x 200 lt raw material tanks, filling level monitoring, temperature and pressure transmitter, 2 automatic raw material filling pumps, PLC Control screen, frequency driver etc. equipment. Machine equipment is prepared in line with the customer's request. According to the request and product type; Our machines are capable of open and closed casting. Our company, an innovative leader in its sector and region in the production of Block Foam, Rigid Foam, Cold cure Foam, Visco and cold room panels, produces polyurethane dosing machines with 30 gram - 4000 gr / sec high pressure injection capacities. Our components used on the lines are selected from fully European and Turkish well known brands. For additional information, technical documents or price information you can send E-Mail.
Production capacity is between 1200 and 1400 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 600-750 units. manual, semi-automatic and fully automatic preferred fixed machines.
