The benefits of ptek rchf3 Ripple, it also integrate the input and output protections and Is equipped with an over-temperature control both on the Primary side and the secondary side of the converter. With a wholly programmable control unit, easy-to-use with the User-friendly graphic interface displaying all the parameters, Historical data of the charge cycles executed, alarms, data Plate and all general information concerning the device. The interface also allows setting all the charge parameters, Selecting the charge curves, setting the clock and activating all The optional functions. Ptek rchf is equipped with a monochromatic graphic lcd Display of 64x128 pixels. The control unit can be connect it to a personal computer. An interface software for pc is available permitting a whole Configuration of the ptek rchf, in order to check and monitor All the functions in real time. The software is equipped With a specific tool for the charge curve configuration and Customization. Input voltage: 400 vca ± 15% three-phase, input frequency: 50 – 60 hz, Efficiency: ~ 90%, operating temperature: – 20 to + 50 °c, current drawn by the Battery: 0 a, if network electrically bonded, protection against output short-circuit, Protection against polarity reversal, thermal protection semi-conductors, input Protection, charge curve: programming and settings, displaying and messages with Monochromatic graphic lcd display, thermal compensation with optional probe, Ventilation with forced air circulation, metallic body with these dimensions: 830 x 500 x 500 mm, protection ip20, in conformity with the low voltage directive 73/23/ Cee and the emc and directive 89/336/cee and their successive amendments.
Attery charger due to battery Disconnection, smart charging system according to the discharge level of the battery, Short check of functions and times, option: custom-made colour and custom-made Logo and silk-screen printing, final acceptance test conforming to safety regulations, Charging with decreasing current (wa characteristic): 9÷11 h charging time, charging With decreasing current (wo - wa characteristic): 7÷8 h charging time, complete With mains and battery cables; assembly of plugs and battery connectors on request. Wa (din 41774): Charge at decreasing current with intervention of the Final charge at 2.40 v/cell, final charge with timed Control 9h / 11h, fixed charging time (equalization Charge excluded), equalization charge (week-end Charge) to be recalled. It will start after 55’ from Charge end, duration of equalized charging phase: Each hour 5’ (repeated for 48 hours), calculation to Determine the size of suitable battery charge: 16a For every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a). Wo-wa: Charge at decreasing current with intervention of the Final charge at 2.42 v/cell, final charge with timed Control 7h / 8h, fixed charging time (equalization Charge excluded), equalization charge (week-end
ier output, rectifier bridge with snubber protection, short check of functions and times, option to program the equalized charge automatically, lab tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic Start, automatic disconnection of battery charger due to battery disconnection, equalization charge based on time, charging with decreasing current (Wa characteristic): 9÷11 h charging time, transformer thermal protection, modular installation on galvanized steel base (20/10) – (30/10), sheet steel case with modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, oven-baked, standard colour: RAL 2002 red, option: custom-made colour, logo and silk-screen printing, mains input and d.c. output polarized cables, complete with mains and battery cables; assembly of plugs and battery connectors on request. “WA” CHARACTERISTIC (DIN 41774): charge at decreasing current with intervention of the final charge at 2.40 V/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization charge (week-end charge) to be recalled. It will start after 55’ from charge end, duration of equalized charging phase: each hour 5’ (repeated for 48 hours), calculation to determine the size of suitable battery charge: 16A for every 100 Ah of the battery (e.g. 500 Ah battery: 16Ax5 = 80A).
The battery chargers of the cemb-easy 3000 Series are designed to recharge medium capacity Traction and start lead-acid batteries and are O the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. Technical characteristics easy 3000: • 230v - 50hz one phase supply, (with possibility to request voltages different from The standard ones), adjustable to ± 5% or ± 10% • electronic control provided with final charge timer • on-off switch • rectifier bridge with silicon diodes, natural cooling, with snubber protection and Gemov • tropicalized stray-flux transformer : tenvex copper windings with double enamel Insulation; class h; impregnated in autoclave with ecological epoxy resins. • 12/10 sheet steel case provided with electrical bondings and ergonomic handle • epoxy powder coating, oven-baked • standard colour: ral2002 red • new lexan plate with charging data very easy to understand • lab-tested electronic circuit conforming to the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. • charge at decreasing current with intervention of the final charge At 2.40 v/cell • final charge with timed control 9h / 11h • fixed charging time (equalization charge excluded) • equalization charge (week-end charge) to be recalled. It will start after 55’ from Charge end • duration of equalized charging phase: each hour 5’ (repeated for 48 hours) • calculation to determine the size of suitable battery charge: 16a for every 100 Ah of the battery (e.G. 500 ah battery: 16ax5 = 80a)
Asuring via digital Gearcase. Such microprocessor control is designed to optimize the Charging cycles for any type of battery. • 230v coil three-pole contactor. • d.C. Fuse on rectifier output. • delta-star stray flux three-phase power transformer class h; Impregnated in autoclave with ecological epoxy resins, with Thermocouples for disconnection due to maximum temperature. • three-phase rectifier bridge with silicon diodes, natural cooling, with
Charge end, duration of equalized charging phase: Each hour 5’ (repeated for 48 hours), calculation to Determine the size of suitable battery charge: 16a For every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
With decreasing Current (wa characteristic): 9÷11 h charging time, transformer thermal protection, Modular installation on galvanized steel base (20/10) – (30/10), sheet steel case With modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, ovenbaked, Standard colour: ral 2002 red, option: custom-made colour, logo and silkscreen Printing, mains input and d.C. Output polarized cables, complete with mains And battery cables; assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of the final charge at 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging Time (equalization charge excluded), equalization charge (week-end Charge) to be recalled. It will start after 55’ from charge end, duration Of equalized charging phase: each hour 5’ (repeated for 48 hours), Calculation to determine the size of suitable battery charge: 16a for Every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Switching technology with microcontroller digital control. They Are flexible and reliable devices. The high efficiency of the battery Chargers assures a remarkable energy saving optimizing the Economic benefits and permitting to amortize the investment for The selection of high frequency in a short time. They are suitable for the recharge of all kind of batteries (leadacid Gel, sealed, agm batteries, etc…) and allow selecting a specific Charge curve or configuring easily a suitable curve for the type of Battery. They are characterized by a negligible residual output ripple. The battery chargers integrate the input and output protections And are equipped with an over-temperature. They have a wholly programmable control unit, easy-to-use thanks To the user-friendly graphic interface displaying all the charge Parameters, the alarms, the data plate and all general information Concerning the device. These kind of battery chargers are equipped With a monochromatic graphic lcd display/led. Technical characteristics: - input voltage: 230 vca ± 10%, mono-phase - input frequency: 50 – 60 hz - efficiency: ~ 90% - operating temperature: – 20 to + 45 °c - current drawn by the battery: 0 a, if network electrically Bonded - protection against output short-circuit: yes, fuse - protection against polarity reversal: yes, fuse - thermal protection semi-conductors: yes - input protection: yes, fuses and varistors - charge curve: programming and settings at Will - default iu ia - displaying and messages: monochromatic 2x20 lcd Display - led - audible alarm device: yes - state charge indicator: yes multicolours
Customized robot cells Full-comprehensive productive solutions with high-reliability components and units, carefully selected and checked for quality over more than 20 years extremely positive experience . Regular wodden crates, suitable to be included in container for oversea shipments
Turbochargers
15kWh Lithium Solar Battery For no city power areas, the battery pack can be charged by solar panels and used for night lighting; For the areas that city power is expensive, the battery pack can be charged during the electricity valley value period, and used at the peak power period; For the areas which power off from time to time, the battery pack can be used as UPS, to avoid information loss caused by sudden power outage
Exportize Ltd supplies a full and diverse range of reliable batteries suitable for cars, commercial vehicles, trucks and boats in both Dry Charge and Maintenance Free types. In order to provide the most powerful driving force for your vehicles, we focus on longer life batteries at competitive prices. To fully meet your needs, we have 20 production lines and the total annual capacity of 12 million KVAh. All our batteries are produced in accordance with international standards such as GB/T5008, BCI, IEC, JIS (Japan), DIN (Germany), SAE (US) to ensure a high and stable quality level for your peace of mind. Our manufacturing base has been accredited with ISO9001:2010 international quality management system and ISO/TS 16949:2011 certification. Want to display your own branding on these products? No problem we'll help you to get your business off to a flying start.
Exportize Ltd supplies a full and diverse range of reliable batteries suitable for cars, commercial vehicles, trucks and boats in both Dry Charge and Maintenance Free types. In order to provide the most powerful driving force for your vehicles, we focus on longer life batteries at competitive prices. To fully meet your needs, we have 20 production lines and the total annual capacity of 12 million KVAh. All our batteries are produced in accordance with international standards such as GB/T5008, BCI, IEC, JIS (Japan), DIN (Germany), SAE (US) to ensure a high and stable quality level for your peace of mind. Our manufacturing base has been accredited with ISO9001:2010 international quality management system and ISO/TS 16949:2011 certification. Want to display your own branding on these products? No problem we ll help you to get your business off to a flying start
we are seller of battery storage systems
"* Charging & Starting& Timing * Suitable for 12/24V Lead-acid battery * Fast Charging,Switchs set for different charging ampï * circuit breaker for safe charging * CABLE CORD SIZE / LENGTH: 3*2.5mm² , OUTSIDE 1.6M ;VDE euro two pins plug COPPER CABLE * Output cable size/length: 10mm²*1.8M 10mm²*1.8M * Reference capacity(Ah): 20-1000Ah * Rated starting current (A): 540A *Rated Charing current (A): 50A *FREQUENCY: 50/60Hz * VOLTAGE: AC 220-240V * Charging voltage (V): 12/24V * POWER: 2.0KW * CE Stanard
"*Charging & Starting *Suitable for 12/24V Lead-acid battery *Switchs set for different charging ampï *circuit breaker for safe charging * CABLE CORD SIZE / LENGTH: 3*1.5mm² , OUTSIDE 1.6M ;VDE euro two pins plug COPPER CABLE * Output cable size/length: 10mm²*1.8M10mm²*1.8M * Reference capacity(Ah): 20-700Ah * Rated starting current (A): 180A * Rated Charing current (A): 30A * FREQUENCY: 50/60Hz * VOLTAGE: AC 220-240V * Charging voltage (V): 12/24V * POWER: 0.6KW * CE Standard
Charge 5 Pink
The DEWALT DCB206 20V MAX* 6.0Ah Lithium Ion Premium Battery is a premium 6.0Ah battery that provides 2X the capacity of standard Battery Pack (DCB200), and 3X the capacity of compact XR Battery Pack (DCB203). It features a 3-LED fuel gauge system that allows for immediate feedback on state of charge. This battery offers no memory and virtually no self-discharge for maximum productivity and less downtime. It is perfect for higher demand tools like demo hammers and grinders which need longer runtimes.
Makita LXT1500 Specifications: Voltage: 18V Number of Tools in Kit: 15 Makita LXT1500 Includes: 18V LXT 1/2" Hammer Driver-Drill (BHP452) 18V LXT 6-1/2" Circular Saw (BSS611) 18V LXT Recipro Saw (BJR182) 18V LXT Impact Driver (BTD141) 18V LXT 4-1/2" Cut-Off/Angle Grinder (BGA452) 18V LXT 1/2" Impact Wrench (BTW251) 18V LXT 7/8" SDS-Plus Rotary Hammer (BHR240) 18V LXT 3/8" Angle Driver-Drill (BDA350) 18V LXT Drywall Screwdriver (BFS450) 18V LXT 1/2" High Torque Impact Wrench (BTW450) 18V LXT 5-3/8" Metal Cutting Saw (BCS550) 18V LXT Blower (BUB182Z) 18V LXT Fluorescent/Incandescent Flashlight (BML184) 18V LXT Flashlight (BML185) 18V LXT Job Site Radio (BMR100W) (4) LXT Li-Ion 3.0 Ah Batteries (BL1830) (2) Rapid Optimum Battery Chargers (DC18RA) Contractor Bag with wheels and telescoping handle (831269-3) Contractor Bag (831284-7)
The Set Includes: (1) M18 Compact Blower (0884-20) (1) M18 Compact 1/2" Hammer Drill/Driver (2607-20) (1) M18 Cordless 5/8" SDS Plus Rotary Hammer (2612-20) (1) M18 Cordless Right Angle Drill (2615-20) (1) M18 SAWZALL�® Reciprocating Saw (2621-20)
