The first fully recyclable shaped spouted pouch available on the market. Made entirely of a mono material (low density polyethylene with EVOH barrier properties) these pouches are 100% recyclable under the code 4 recycle code (most supermarket and recycle centres offer code 4 drop of points) The pouches are ideal for single use refills of for example; Cosmetics - Coffee scrubs, Dense soaps, gels, Shampoo, Conditioner, Shower gel, Concentrate for products such as (add water to mix) Soap / Detergents - Fabric softener, Car cleaning products, Screen washer fluid, Meal kit sauces / pasta. The pouches are pre-formed and can be filled by the opening on the top edge and sealed using conventional heat sealers â?? the end user can easily access the product by removing the tip of the shaped pouch & easily dose out through the created opening. Available in 5 formats â?? and from just 100 pieces per size. We can also provide you with a fully customized version â?? with full colour printing & custom format from just 10,000 pieces per size. Standard color: transparent Standard sizes: 50 ML - 100 ML - 250 ML - 330 ML - 500 ML - 1000 ML
Safetybags by DaklaPack Secondary leak proof packaging - 100% leak and tamper proof. Available in various sizes, suitable to hold a wide range of primary containers, such as blood tubes, specimen containers and swabs. The pouches are easy to close. They are sequentially numbered and incorporate a tamper-evident seal to ensure ease of identification and security throughout the chain of custody. The pouch is made of strong transparent polyethylene, and is guaranteed to keep liquid inside. Easy to close, simply removing the backing strip and applying even pressure across the strip, the pouch is then hermetically sealed. In combination with the transport blister, the PolyMed mailing envelope and sufficient absorbent material, this composition complies with the packaging regulations (P650 and P959). We would be happy to quote you for various formats and for printing, on request. UN3373 Standard â?? Key Requirements The P650 packaging instructions for liquid substances state:- The primary receptacle(s) shall be leak proof and must not contain more than 1L liquid, and not contain more than 1kg solid. The secondary packaging shall be leak proof for liquids; (DaklaPack's Safetybags) If multiple fragile primary receptacles are placed in a single secondary packaging, they shall be either individually wrapped or separated to prevent contact between them; (DaklaPack's Absorbing sheets + tube holders) If liquid, absorbent material shall be placed between the primary receptacles(s) and the secondary packaging. The absorbent material shall be in quantity sufficient to absorb the entire contents of the primary receptacle(s) so that any release of the liquid substance will not compromise the integrity of the cushioning material or of the outer packaging; The outer packaging must be rigid and must not contain more than 4L liquid or 4kg solid. One surface of the outer packaging must measure at least 100mm x 100mm (DaklaPack's boxes and shipping solutions are fully conform if there is any doubt as to whether or not residual liquid may be present in the primary receptacle during transport, then a packaging suitable for liquids, including absorbent materials, must be used.
100% leak proof, tamperproof and true 95kpa meets DOT and IATA requirements. We at DaklaPack recently designed and patented our own 95kpa Safetybags�® and have had them fully certified by the BVI. DaklaPackâ??s 95kPa transport bags are ideal to use as a secondary watertight receptacle in accordance with DOT and IATA regulations for shipping Biological Substances. DOT and IATA shipping regulations require that UN3373 Biological Substance, Category B specimens are transported in either a primary container or secondary packaging that has passed the 95kPa pressure differential test. Custom sizes and solutions can be made available - contact us for expert advise.
RigidSafetybag - combining 3 packaging elements into 1 & simplifying the packing process. The patented RigidSafetybag by DaklaPack consists of a 100% leak and tamper-proof Safetybag, a blister like tube holder surrounded with sufficient absorbing material to fully absorb any leaked content from the primary receptacle during the unlikely event of a leakage. Due to the rigid internal component, the filled and sealed RigidSafetybag can simply be entered into a fully labelled UN3373 envelope / box and sent to the receiver. Save time effort and money using this simple solution which is fully labelled with usage instruction and provides 100% tamper evidence due to its destructive seal and tamper text in the side seals.
DaklaPack - IV UV Protection bags Protect medication from harmful UV light! DaklaPackâ?? s IV UV Protection bags are ideal for protecting IV Infusions, medications, and even nutritional bags against harmful ultraviolet light. Ultraviolet light can cause oxidation, hydrolysis, and loss of potency to sensitive medications. Simply place the IV bag (even bottles, piggyback container & syringes) inside of the IV UV Protection bag to ensure medication potency. The amber colouration protects against UV light whilst offering enough transparency to check fluid levels & flow rates. available in 2 sizes - 135mm x 250mm + 200mm x 400mm and made from a strong 120micron Polyethylene. â?¢ Perfect for cytostatic iv bags & nutrition bags. â?¢ Manufactured from a strong ultraviolet inhabitant polyethylene â?¢ Tested from wavelength 500nm to 320nm with max 5.36% and min 0.15% across the spectrum â?¢ Fully evaluated by SGS and test reports are readily available with full wavelength transmittance curve. We can also provide you with custom sized IV UV protector bags, with a completely custom print, ideal for private health sector organisations. Contact us for more information.
Features Two different adult sizes Three different child sizes Material = PEVA Plastic Adult bags = U-shaped zip Infant bags = Straight zip Clear ID document pocket Folded edge giving a watertight seal Double skinned strip of material to cover zips ends. Subject to the qty. price is negotiable. Export from the UK.
It is produced with COEX technology, which can be the same inside and outside in different colors. Flexo printing option up to 6 color. High quality printing in up to 6 colors with Flexo printing technology. Supply of different film types and thicknesses according to customer needs. Film Type: LDPE-MDPE. Single coat or Co-ex
Packaging, cleaning products.
We can tailor drum sizes to meet your specific requirements and use case. * From 12 litre (3 gallon) up to 160 litres (42 gallon) capacity. * Tight Head, Open Head, Composite options available. * Thicknesses according to specification. * UN Solid and Liquid ratings available. * Plain or internally lacquered with epoxy, phenolic etc. * Stainless Steel Options also available.
Tight Head or Open Head Steel Drums Available and can be customised to meet your requirements. * Tight Head drums have a triple seam construction (7 layers of steel) with a vertical seam electrically welded. * Superior vacuum resistance. * Open Head drums have completely removable lids and a triple seam safety factor with several locking band alternatives. * Many large steel drums can be reconditioned and reused several times before being recycled. * Fully customisable size 55+ gallons (208+ nominal litres), lined, various closures and fittings available. * Various colour and product decoration options are also available.
Pizza box. corrugated box. cardboard box. burger box. food box..
Type: Die Cut Shopping Bag, Carrier Bag Material: HDPE / LDPE Color: Desired Color Thickness: Customized Thickness Printing: Customized Logo / Design Size: Customized Size MOQ: 50.000 Pieces
pizza box, corrugated box, carton box, cardboard box, printed box.
Disposable fast food packaging boxes.
It is painted with long-lasting machine paint that is resistant to UV sun rays and can be wiped. The fabrics on it are non-stick, stain-proof, dart series fabric. sponge thickness is 7 cm fabrication cut 27 density sponge. Comfortable to sit and use.
Reference: KH-1495 Capacity: 2.2 L - High quality stainless steel - Double walled design - Light and convenient to carry - Unbreakable - Ideal for food and drinks - Will stay hot or cold for hours - Capacity : 2.2 L
Reference: KH-1460 Capacity: 0.75 L - High quality stainless steel - Double walled design - Light and convenient to carry - Unbreakable - Ideal for food and drinks - Will stay hot or cold for hours - Ideal for school, office and outdoor use. - Capacity : 0.75
Reference: KH-1458 Capacity: 0.75 L - High quality stainless steel - Double walled design - Light and convenient to carry - Unbreakable - Ideal for food and drinks - Will stay hot or cold for hours - Ideal for school, office and outdoor use. - Capacity : 0.75 L
Suit Covers / Garment Bag UNIT WEIGHT: 75 gr BOX SIZES: 23X30X30cm BOX TYPE: Cartoon PIECES IN BOX: 24 BOX CBM: 0,021 m3 BOX WEIGHT: 1900 gr Foldable - Space saving â?? Easy set up - Helps to protect your suits â??Classic uses - Always in stock - Printed with standart clasic patterns-Sizes are adjustable Packing : 1 unit in 1 PP bag Availablity for customized pattern print for order above 5.000 units
We are pleased to offer - Sub unsold- LDPE foils 95-5, bales quantity: abt. 10 loadings today from Germany EURO 498,--/mt cfr Asian main port
