When cuts ceramic tile, it will add water while cutting. The main functions of adding water are: 1. Prevent the ceramic tile from being too high and crack; 2. Reduce the temperature of the saw blade and prolong the service life; 3. Reduce the dust pollution. However, this produces a mixture of ceramic tile powder and water, Ceramic filters can efficiently separate materials and water from sewage.
The advantages of ceramic filters are as follows:
First, the power consumption is low, the power is only 12-20KW per hour, and the energy consumption is low.
Second, the filtered material is dry, the moisture content is about 10%, and the product has no loss, reaches 100% recovery.
Third, fully automatic control, can achieve one person to guard multiple devices or directly access the control center to achieve unattended.
Fourth, the liquid produced by the equipment is clear as pure water, and can be used directly as a production water source, which can achieve 90% water source recovery, greatly reducing the water consumption of the factory. #DiscVacuumFilter #DiscFilter #MiningSeparationFilter #MiningEquipment #MiningFilter #CeramicDiscVacuumFilter
Silicon Carbide Ceramic Foam Filter
Silicon Carbide Ceramic Foam Filter is mainly made of high purity fine silicon carbide powder, which is suitable for filtrating Ductile, Grey Iron, Vermicular Cast Iron and some Iron Alloy and also for filtrating non-ferrous alloy, such as Cooper alloy and Aluminum alloy. It can remove impurities efficiently, and make metal filling steady in mould. It can also reduce air flow and casting impact in mould, and decrease pin hole, sand hole defeats to increase casting quality and product rate.
These series of products are newest products, which are produced through special material formula and latest advanced technology. Compared with normal ceramic foam filters, these new series products can be used at a higher temperature, which have higher strength at room temperature and high temperature. The physical property of this special material enables our filters to have a better thermal shock resistance. They are suitable for harsh casting condition, such as placing on the bottom of vertical runner and casting at high temperature.
The ceramic filter material sold by Ningxia Biyuan Activated Carbon Co., Ltd. is refined by a series of production processes. The appearance of black, granular, with developed pores, good adsorption properties, high strength, economic advantages, mainly used for water treatment,Ningxia Biyuan Activated Carbon Co., Ltd. is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
Cff-s is a range of new generation silicon carbide based ceramic foam filters with a consistent, high level performance in terms of metal flow rate and filtration efficiency. Cff-s filters are intended for filtering grey, ductile iron and nonferrous metals at the temperatures up to 1450 â°c. The filters can be placed in the gating system of the mould as well as in combination with exothermic extensions for direct casting/pouring on the filter. They can also be used for continuous non ferrous metal filtering, e.G. Production of copper wires, roads.
Features:
1. High strength
2. Excellent corrosion resistance
3. Outstanding thermal shock resistance
4. Available in kinds of shapes, in a variety of pore sizes, e.G.10ppi, 20ppi, etc.
Functions:
1. Clean iron castings
2. Fewer inclusions
3. Increased casting yield
4. Cost-savings from reduction in scrap
5. Lower costs for machining of the castings
Standard dimensions and technical parameters
Dimensions (mm) Pouring rate(kg/s) Filtration capacity(kg)
Grey iron Ductile iron Grey iron Ductile iron
40x40x22 4 3 65 32
50x50x22 6 4 100 52
75x50x22 9 6 150 75
75x75x22 14 9 220 100
150x150x22 50 36 900 450
170x150x32 62 42 1020 510
200x170x32 84 56 1400 700
D50x22 5 4 80 40
D60x22 6 5 110 55
Above figures are only for reference .Other special specification could be customized.
Flat Sheet Ceramic Membrane
The flat plate membrane is a new type of high temperature plate porous ceramic membrane, which is prepared by high temperature sintering process using inorganic materials such as alumina. Our Ceramic flat sheet membrane can offer exceptional efficiency and durability compared with the organic film. Ceramic flat membrane produced by one of professional flat sheet membrane manufacturers in China has the advantages of good chemical stability, good reliability, long service life and strong anti-pollution ability.
Advantages of Flat Sheet Ceramic Membrane
Long life and no degradation
Strong resistance to acid, alkali and to organic solvent; Suitable for all kinds of wastewater containing solvents and chemicals
Strong hydrophilic and better anti- pollution property
Better Mechanical properties, no broken wires phenomenon of hollow fiber membrane
Easy to wash lower cleaning frequency, suitable for all kinds of membrane cleaning methods
Low operating cost and energy saving
Flat Sheet Ceramic Membrane Specification
Length (mm) 500-1100
Width (mm) 110, 150, 250
Thickness (mmï¼? 3, 6
Area (m2) 0.5
Membrane material Al2O3, ZrO2, TiO2
Pore diameter (�¼m) 0.1
Pure water flux (m3/m2.h) 0.5-1.0
pH 0-14
Breaking strength (MPa) 40
Ceramic Flat Sheet Membrane Application Area
Membrane Bioreactor (MBR)
Industrial wastewater treatment (e.g. paper mill wastewater treatment)
Seawater desalination pretreatment
Municipal wastewater treatment
Domestic sewage treatment
Hospital wastewater treatment
Landfill leachate treatment
Pretreatment of RO system
