This product is made of acrylic resin and imported sun resistant pigment.It has high solid content,good covering power,fast drying and good weather resistance.It is more convenient to paint with special female valve and special nozzle.It can easily draw various colors and lines.
This product belongs to the aerosol type nitro from dry paint, is specially designed for wood product repair. Good is well established for its flexible operation, spray atomization, gushing rate high characteristic. Paint film dry quickly, fullness, high hardness, adhesion, gloss, flexibility, impact resistance and other comprehensive excellent, rich color is gorgeous, adornment effect is good, and have very good protection function. Advantages: 1. High hardness & good abrasion 2. Excellent leveling & easy to apply Application: Applicable for wood, furniture,plastic, ABS and any surface of wood.
Theaoson zinc coating spray is composed of aerosol can, aerosol valve, paint liquid and propellant. This product uses bright silver powder imported from Germany. The color of the paint film produced after use has the same high-gloss galvanized color as the galvanized parts, it has the same color as the galvanized color that fades with the exposure time, so that there is no color difference in the repaired part coated on the galvanized part. Features High-gloss bright zinc Color consistent with galvanized parts Good atomization, easy to use Application It is suitable for color changing and anti-corrosion treatment of stainless steel, carbon steel, galvanized parts and other metal parts. Base material to prepare Clean the oil, dust and water stains thoroughly before use, and polish or spray primer on the base material if necessary. Instructions: Before use, you must shake up, down, left, and right, and continue to shake the can for about 1 minute after hearing the sound of glass to ensure that the paint liquid is fully mixed and even. 15 ~ 30cm away from the surface of the object to be sprayed, press the nozzle with the index finger to spray uniformly back and forth. When a small amount of remaining liquid cannot be sprayed, please rotate the nozzle 180 �° and spray again. If spraying is not finished one time, put the can upside down before storage, press the nozzle for about three seconds, and clean the nozzle to prevent plugging. Ending working After spraying, it should be placed in a clean and ventilated environment for about 12 hours. If it is not sprayed, the remaining material needs to be kept away from the light, and avoid being near fire sources. The solution of normal problem 1. Paint film whitening: It is recommended to avoid rainy days (especially high temperature and high humidity) and the next day after continuous rain. 2. Shut up: shake evenly and spray for 3 seconds or change nozzle. 3. Spray up: low temperatures suggest using 50 â?? warm water to heat up, one-time finish spray, spray avoid angle 45 degrees. 4. Flow: use the correct spraying distance (15-25cm) and spray movement speed (30-60cm/s) to avoid a thick spray. 5. Bite bottom: remove the bottom part of the bite, fill the bottom ash, and then spray the paint after the coating is dry and flat. Attention Keep away from children, please work in the air. If swallowed, you should immediately cause vomiting and seek medical advice. Spray must be kept in aerosol cans are vertical and horizontal angle of no less than 45 �°. Flammable, pressure vessel, do not use near fire source. The weight changes over time, which is normal, and the attrition rate is less than 2%/ year.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on. Features Fast drying Colorful and easy to use Full paint film and high gloss Application Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions. Usage 1.Shake well the can about two minutes before use to ensure that the paint is evenly mixed; 2.First spray on a small area of the test panel to confirm the accuracy of the selected color; 3.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth; 4.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180�° and spray it again. 5.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on. Features Fast drying Colorful and easy to use Full paint film and high gloss Application Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions. Usage 1.Shake well the can about two minutes before use to ensure that the paint is evenly mixed; 2.First spray on a small area of the test panel to confirm the accuracy of the selected color; 3.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth; 4.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180�° and spray it again. 5.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking. Finishing work: 1.After spraying, the sample should be placed in a clean and ventilated environment for about 12 hours; 2.If not sprayed, the remaining material must be stored at room temperature and protected from light.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on. Features Fast drying Colorful and easy to use Full paint film and high gloss Application Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions. Usage 1.Shake well the can about two minutes before use to ensure that the paint is evenly mixed; 2.First spray on a small area of the test panel to confirm the accuracy of the selected color; 3.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth; 4.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180�° and spray it again. 5.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking. Finishing work: 1.After spraying, the sample should be placed in a clean and ventilated environment for about 12 hours; 2.If not sprayed, the remaining material must be stored at room temperature and protected from light.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on. Features Fast drying Colorful and easy to use Full paint film and high gloss Application Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions.
46% zinc cold galvanizing is composed of aerosol cans, aerosol valves, paint liquids and propellants. It is widely used in the following fields: anti-corrosion and repair of metal parts such as outdoor, indoor, manufacturing, and transportation industries. , refurbished. Metal products such as iron, tin and other metals whose chemical reducibility is lower than that of zinc. Features 1.Fast drying 2.Colorful and easy to use 3.Full paint film and high gloss 4.Strong adhesion Application It is suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions
FEATURES This product adapted lead free water-based environmental formula,Contain efficient formaldehyde remover factor.Not only can remove formaldehyde for a long time,eliminate peculiar smell,but also have antibacterial effect. conforms to the RoHS test.Suitable for indoor and outdoor spraying.It will not fade after drying.Mild odor,no strong organic solvent pungent odor. APPLHCATION It is widely use for various materials, such as foamed styrene, plastic (acrylic acid, polycarbonate, hard vinyl chloride, ABS, styrene), metal, wood,brick, paper, glass, asbestos tile and so on. DIRECTION 1.It will not corrode the substrate when spray on the foam styrene,oil-based paint and other materials,can be applied to a wide range.2.Spray delicate,not easy to flow,good spraying effect.3.It can be wiped to clean before dry,band it is resistant well to water and weathering after drying..4 It is a high-grade environmentally friendly self-painting paint that meets the European Union's RoHS heavy metal content.5.Effective removal of formaldehyde,at the same time have a certain antibacterial,deodorizing effect. USAGE 1.Shake the can fully before using,shake for about 30 seconds more after hearing the voice of glass beads.Also need constantly shake during spraying. 2.Clean the dust,oil stains,rust,mildew before spraying. 3.Keep 30cm from the spraying surface to the nozzle when spray. 4.Keep parallel moving with the sprayed surface and do not spray too thick each time,and spraying thinner and thinner,spraying 2-3 times. 5.It should be dried before spraying the second time,usually in summer need 0.5 hour to dry( 1 hour in winter). 6.When spraying in strong water absorption wood products,should paint water-based varnish in advance or other primer to prevent excessive adsorption of the paint; 7.spraying times:Standard spraying for 2 times.
Excellent weather resistance; Excellent light retention and color retention. Good chemical resistance and water resistance; With appropriate primer, good adhesion; Fast drying, good leveling, strong covering power; Wide range of application, good matching, can be matched with a variety of primers and used for a variety of material surface.
FEATURES: This product is rich in silicone oil formulations, so that furniture and household items at once see moisturizing gloss, bright and nature. Not only to nourish wood and leather, but also on the surface of the article formed a layer of protective film, so that prevent the water vapor, dust particles and the friction, while effectively prevent the deformation of dry goods, and always as good as new, easy to use, spray, rub, clean, polish and protect in one step. APPLICATION: Applicable to all kinds of wood, veneer furniture, leather products, polyester lacquer, marble, tiles, musical instruments and household appliances, automotive interior and exterior decoration, and so on.
Features This product is adopted distinctive high-gloss formula, at the same time, in the removal of iron and steel surface besmirch can increase the metal surface luster, leaving no water lines and fingerprints, and keep the surface dry, not greasy, long-term effect, rich in foam, smell fragrant. Application It is widely used in stainless steel, chromium plating materials, aluminum products, metal products, ceramics, rubber and other clean glazing.
It is water based and benzene-free, so this is a fresh flower safe products. Theaoson flower spray is a fast drying, flawless finish, pigmented spray which provides beautiful color without a thick coat of paint. It is specially formulated for the demanding use of the professional and DIY creative individuals. We have the color like BLUE VIOLETS, JUST PEACHY, SAKURA BLOSSOM, PINE FOREST and so on.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on. Features High-gloss bright zinc Color consistent with galvanized parts Good atomization, easy to use Application It is suitable for color changing and anti-corrosion treatment of stainless steel, carbon steel, galvanized parts and other metal parts. Instructions: Before use, you must shake up, down, left, and right, and continue to shake the can for about 1 minute after hearing the sound of glass to ensure that the paint liquid is fully mixed and even. 15 ~ 30cm away from the surface of the object to be sprayed, press the nozzle with the index finger to spray uniformly back and forth. When a small amount of remaining liquid cannot be sprayed, please rotate the nozzle 180 �° and spray again. If spraying is not finished one time, put the can upside down before storage, press the nozzle for about three seconds, and clean the nozzle to prevent plugging.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on. Features Fast drying Colorful and easy to use Full paint film and high gloss Application Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions. Usage 1.Shake well the can about two minutes before use to ensure that the paint is evenly mixed; 2.First spray on a small area of the test panel to confirm the accuracy of the selected color; 3.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth; 4.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180�° and spray it again. 5.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on. Features Fast drying Colorful and easy to use Full paint film and high gloss Application Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions. Usage 1.Shake well the can about two minutes before use to ensure that the paint is evenly mixed; 2.First spray on a small area of the test panel to confirm the accuracy of the selected color; 3.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth; 4.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180�° and spray it again. 5.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking. Finishing work: 1.After spraying, the sample should be placed in a clean and ventilated environment for about 12 hours; 2.If not sprayed, the remaining material must be stored at room temperature and protected from light.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on. Features Fast drying Colorful and easy to use Full paint film and high gloss Application Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions. Usage 1.Shake well the can about two minutes before use to ensure that the paint is evenly mixed; 2.First spray on a small area of the test panel to confirm the accuracy of the selected color; 3.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth; 4.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180�° and spray it again. 5.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking. Finishing work: 1.After spraying, the sample should be placed in a clean and ventilated environment for about 12 hours; 2.If not sprayed, the remaining material must be stored at room temperature and protected from light.
Theaoson water-based spray paint is composed of aerosol cans, aerosol valves, paint and spray agent. It is widely used in the following fields: repairing paint defects, molds, industrial machinery, buildings, steel structures, advertising, marking, graffiti and so on. Features 1.Fast drying 2.Colorful and easy to use 3.Full paint film and high gloss 4.Strong adhesion Application It is suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions Usage Before use, you must shake up, down, left, and right, and continue to shake the can for about 2 minute after hearing the sound of glass to ensure that the paint liquid is fully mixed and even. 1.First spray on a small area of the test panel to confirm the accuracy of the selected color; 2.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth; 3.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180�° and spray it again. 4.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking. Finishing work: 1.After spraying, the sample should be placed in a clean and ventilated environment for about 12 hours; 2.If not sprayed, the remaining material must be stored at room temperature and protected from light.
Theaoson graffiti spray paint is composed of aerosol tank, aerosol valve, paint liquid and spray agent. This product is one component acrylic paint, made of acrylic resin, imported sunproof pigment, additives and solvent. With special valve and special nozzle, it is more convenient to paint various colors and different lines easily. Features High solid content Good covering power Rapid drying Good weather resistance Rich color Application It is suitable for all kinds of metal, ceramic, wood, glass and other materials graffiti painting. If it needs to be used for plastic material, it can be used in a small area first, and then be used in a large area after no adverse reaction. Usage Clean up dirt, oil and water stains on the surface of the sprayed object before using. A small area trial spray is carried out before spraying, and construction is carried out after no adverse reactions; From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth; Shake the product up and down for about 1 minute, so that the material liquid is fully mixed and uniform, spray at a distance of about 15~20cm from the sprayed surface at a uniform speed, completely cover about 2~3 times, according to the required covering effect can decide the number of spraying times, spraying for multiple times, each time interval of 1 minute; If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking. How to deal with emergency Soothe your skin by washing it with lots of soap and water, and go to a doctor asap if you still feel unwell. If you get into your eyes, wash them with plenty of water. If you still feel unwell, go to medical treatment immediately. Stop working immediately if you feel uncomfortable during operation and go to a well-ventilated place to relax. If the spray is not finished, the remaining materials should be stored at normal temperature and protected from light, so as to avoid being near the fire source.
Theaoson graffiti spray paint is composed of aerosol tank, aerosol valve, paint liquid and spray agent. This product is one component acrylic paint, made of acrylic resin, imported sunproof pigment, additives and solvent. With special valve and special nozzle, it is more convenient to paint various colors and different lines easily. Features High solid content Good covering power Rapid drying Good weather resistance Rich color Application It is suitable for all kinds of metal, ceramic, wood, glass and other materials graffiti painting. If it needs to be used for plastic material, it can be used in a small area first, and then be used in a large area after no adverse reaction. Usage Clean up dirt, oil and water stains on the surface of the sprayed object before using. A small area trial spray is carried out before spraying, and construction is carried out after no adverse reactions; From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth; Shake the product up and down for about 1 minute, so that the material liquid is fully mixed and uniform, spray at a distance of about 15~20cm from the sprayed surface at a uniform speed, completely cover about 2~3 times, according to the required covering effect can decide the number of spraying times, spraying for multiple times, each time interval of 1 minute; If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking.