RE-006+PCU Electric Actuator
RE-008~1100 Electric Actuator + Enclosure - Weatherproof - IP67 / Nema 4 - Submersible - IP68 (10 meters for 72 hours) - Explosionproof - Ex d IIB T4 (ATEX) + Motor Power (Motors are Fan Cooled) - 1 Phase - 110/220 Volt / 60-50Hz, +/- 10% - 3 Phase - 220/380/440/460 Volt / 60-50Hz, +/- 10% - DC - 24 Volt + Limit Switches - (4) Adjustable, SPDT (Rated 250 VAC, 10 Amp) + Torque Switches - (2) Open & Close, SPDT (Rated 250 VAC, 10 Amp) + Handwheel with Manual Declutch Lever + Mechanical Stops : Adjustable +/- 10ã?? + ISO 5211 Mounting Bases
SD series Pneumatic Actuator (Scotch Yoke)
SS Series Pneumatic Actuator (Scotch Yoke)
RD / RS series Pneumatic Actuator (Rack & Pinion type)
AP Series (Stainless) Pneumatic Actuator (Rack & Pinion)
PA-10 Side Handwheel
PA-13 Silencer
Product name 10TP583T operating temperature - 20 c to + 100 cpackage / case to-18 brand semitec mounting style through hole detectivity d-star at 500 f 14.7e7 cm hz1/2 / welement size1.05 mm x 1.05 mm noise equivalent power - nep2.2 nw/hz 1/2 photo sensitivity15 v/w height 2.85 mm length5.6 mm operating temperature range- 20 c to + 100 c
Supplier of walk-in environmental test chamber. Designed to perform high-temperature operations for large-sized test specimens. The multipurpose walk-in chamber is the perfect site for testing the components against humidity, temperature, and various climate conditions.
1. 8 channels of sending, 8 channels of reception; 2. Receive and add current system time; 3. Timing transmission and data can be updated at any time; 4. Receive labeled filtering and interrupt receiving; 5. The baud rate can be set to 10K, 12.5K, 48K, 50K, 100K, 150K; 6. FIFO reset function of sending and receiving, set to receive enable signal; 7. Send FIFO including 511x32BIT , and receive FIFO including (1M-1) Ã?32BIT 8. Standard ARINC429 data format, receiving and sending can be set separately; Product Description: ZY32208/32308 interface module which researched and developed according to ARINC429 Bus Communication Agreement is based on buses PXI/CPCI/PCI. The data can be updated at any time, and the word interval, message interval, the predetermined quantity of transmitting messages and the quantity of sent messages can be set up. The modules SCSI-68-pinhole connector makes it easy to operate. The powerful functions of this module can meet users communication testing requirements, and the excellent compatibility is available to all types of system configurations. Performance Parameters: Quantity of Transmitting channel: 8; Quantity of receiving channel: 8; Baud rate: 10K/12 5K/48K150K/100K/150K; Send FIFO: 511Ã?32BIT; Receive FIFO: (1M-1)Ã?32BIT; General Specifications: External dimensions (LÃ?WÃ?H): Standard PXI/CPCI3U card 160mmÃ?100mmÃ?4HP, tolerance
1. 8 channels of sending, 8 channels of reception; 2. Receive and add current system time; 3. Timing transmission and data can be updated at any time; 4. Receive labeled filtering and interrupt receiving; 5. The baud rate can be set to 10K, 12.5K, 48K, 50K, 100K, 150K; 6. FIFO reset function of sending and receiving, set to receive enable signal; 7. Send FIFO including 511x32BIT , and receive FIFO including (1M-1) Ã?32BIT 8. Standard ARINC429 data format, receiving and sending can be set separately; Product Description: ZY32208/32308 interface module which researched and developed according to ARINC429 Bus Communication Agreement is based on buses PXI/CPCI/PCI. The data can be updated at any time, and the word interval, message interval, the predetermined quantity of transmitting messages and the quantity of sent messages can be set up. The modules SCSI-68-pinhole connector makes it easy to operate. The powerful functions of this module can meet users communication testing requirements, and the excellent compatibility is available to all types of system configurations. Performance Parameters: Quantity of Transmitting channel: 8; Quantity of receiving channel: 8; Baud rate: 10K/12 5K/48K150K/100K/150K; Send FIFO: 511Ã?32BIT; Receive FIFO: (1M-1)Ã?32BIT; General Specifications: External dimensions (LÃ?WÃ?H): Standard PXI/CPCI3U card 160mm100mm 4HP, tolerance
1. 8 channels of sending, 8 channels of reception; 2. Receive and add current system time; 3. Timing transmission and data can be updated at any time; 4. Receive labeled filtering and interrupt receiving; 5. The baud rate can be set to 10K, 12.5K, 48K, 50K, 100K, 150K; 6. FIFO reset function of sending and receiving, set to receive enable signal; 7. Send FIFO including 511x32BIT , and receive FIFO including (1M-1) 32BIT 8. Standard ARINC429 data format, receiving and sending can be set separately; Product Description: ZY32208/32308 interface module which researched and developed according to ARINC429 Bus Communication Agreement is based on buses PXI/CPCI/PCI. The data can be updated at any time, and the word interval, message interval, the predetermined quantity of transmitting messages and the quantity of sent messages can be set up. The modules SCSI-68-pinhole connector makes it easy to operate. The powerful functions of this module can meet users communication testing requirements, and the excellent compatibility is available to all types of system configurations. Performance Parameters: Quantity of Transmitting channel: 8; Quantity of receiving channel: 8; Baud rate: 10K/12 5K/48K150K/100K/150K; Send FIFO: 51132BIT; Receive FIFO: (1M-1)32BIT; General Specifications: External dimensions (LWH): Standard PXI/CPCI3U card 160mm100mm4HP, tolerance
usa,pakistan,japan,malaysia,saudi arabia,australia
General product A temperature sensor is a sensor that senses temperature and converts it into output signal. The temperature sensor can accurately measures the ambient temperature and is widely used in agriculture, industry, workshops, warehouses and other places. This product measures the change in ambient temperature and outputs the temperature change value in the form of RS485 digital signal through inter processing. This product provides a temperature query command and provides digital signals at the same time. This product adopts RS485 half-duplex communication interface and is compatible with terminals with RS485 communication interface on the market, which is convenient for collecting temperature signals. The product has the characteristics of simple structure and convenient installation. Scope of application A variety of industries that require temperature, such as the food transportation industry, the pharmaceutical transportation industry, and temperature sensitive article storage industry. Parameter description supply voltage:DC9-30V supply current:
55KU band satellite dish antenna small TV antenna outdoor dish satellite 1. Specifications: Material: Steel plate Stand: Wall and/or Ground mount Finishing: Polyester powder coating Short axle: 55cm Long axle: 59cm Elevation Adjustment: 0�-90� Azimuth Adjustment: 0�-360� KU-BAND Gain @ 12.5GHz: 35.83dB Can receive: 25m/sec Can replace: 40m/sec Not damage: 60m/sec F/D radio: 0.65 Focal distance: 330mm Working temperature: -40 to +60 2. Shipping: 1) Small order: By express, DHL/ UPS/ Fedex/ EMS etc. 2) Large order: By sea or By air. 3) Choose the best and convinient way for your need. 3. OEM/ODM Service: 1) OEM/ODM project is welcome .with our professional top service .you could make your own special and new design. 2) The MOQ for customized products is varied from 500pcs to 5000pcs or even more. 3) We always respect our customers'copyright or business secrets. 4. Other Details: 1Samples policy: For small quantity samples,we offer without charges, but shipping and taxes paid by the buyer. 2Our main market: Latin America, Africa, Mid East, Asia. 3About payment: T/T,L/C,and other Payment can be discussed. We Provide You With Sincerely Service, if you interest, pls contact us NOW!!!
45KU band satellite dish antenna 0.45m 45cm small TV antenna outdoor dish satellite 1. Specifications: Material: Steel plate Stand: Wall and/or Ground mount Finishing: Polyester powder coating Short axle: 45cm Long axle: 49.5cm Elevation Adjustment: 0�-90� Azimuth Adjustment: 0�-360� KU-BAND Gain @ 12.5GHz: 34.22dB Can receive: 25m/sec Can replace: 40m/sec Not damage: 60m/sec F/D radio: 0.65 Focal distance: 270mm Working temperature: -40 to +60 2. Shipping: 1) Small order: By express, DHL/ UPS/ Fedex/ EMS etc. 2) Large order: By sea or By air. 3) Choose the best and convinient way for your need. 3. OEM/ODM Service: 1) OEM/ODM project is welcome .with our professional top service .you could make your own special and new design. 2) The MOQ for customized products is varied from 500pcs to 5000pcs or even more. 3) We always respect our customers'copyright or business secrets. 4. Other Details: 1) Samples policy: For small quantity samples,we offer without charges, but shipping and taxes paid by the buyer. 2) Our main market: Latin America, Africa, Mid East, Asia. 3) About payment: T/T,L/C,and other Payment can be discussed. We Provide You With Sincerely Service, if you interest, pls contact us NOW!!!
CAPT valve actuators includes worm gear driven units suitable for ball valves, butterfly valves, plug valves, as well as fire-control worm gear drives with micro-switches for fire protection systems and debris insulation. This product series also include a line of bevel gear driven units suitable for gate valves and globe valves. This bevel gear unit features either a one-stage or multi-stage series transmission, which includes a wide output torque range. CAPT has over 15 years of experience manufacturing this product line, with an annual output of 300,000 sets of various types of valve actuators including custom actuators per customer request. Advanced equipment and strict production technique ensures CAPT valve actuators are trusted domestically and worldwide for their dependability and quality.
DDS-1702 Portable Conductivity Meter is an instrument used for the measurement of the conductivity of aqueous solution in the laboratory. It is widely used in petrochemical industry, bio-medicine, sewage treatment, environmental monitoring, mining and smelting and other industries as well as junior college institutions and research institutes. If equipped with conductivity electrode with the appropriate constant, it can also be used to measure the conductivity of pure water or ultra-pure water in electronic semiconductor or nuclear power industry and power plants.
PHS-1701 Portable pH Meter PHS-1701 portable pH meter is a digital display PH meter, with LCD digital display, which can display PH and temperature values simultaneously. The instrument applies to the labs in junior college institutions, research institutes, environmental monitoring, industrial and mining enterprises and other departments or field sampling to determine the aqueous solutions PH values and potential (mV) values. Equipped with ORP electrode, it can measure the solutions ORP (oxidation-reduction potential) value; equipped with the ion specific electrode, it can measure the electrode potential value of the electrode.
