Canon has released the 5D Mark IV DSLR which is an outstanding still photography option and an able 4K-capable video machine. This multimedia maven offers a newly developed 30.4MP full-frame CMOS sensor paired with the DIGIC 6+ image processor in order to balance fine detail and resolution with low-light performance and sensitivity. It is able to work within a native range of ISO 100-32000, which can then be expanded to an impressive ISO 50-102400, for sharp, low-noise images in a variety of conditions. Along with these improvements to image quality, users will enjoy a performance boost across the board with an enhanced AF system, built-in Wi-Fi, NFC, and GPS, and much more.
In order to deliver detailed images quickly and effectively the 5D Mark IV leverages the power of the DIGIC 6+ image processor, which can handle up to 7 frames per second during continuous shooting. It also uses a 150,000-pixel RGB+IR metering sensor to evaluate the scene and subjects for accurate exposures under a variety of different lighting conditions. An improved 61-point High Density Reticular AF furthers the camera's speed by tracking and locking onto subjects quickly and accurately for tack sharp photos. A new AF area select button is now available as well for near immediate access to this setting.
Video benefits from the addition of Dual Pixel CMOS AF and Movie Servo AF to smoothly rack focus during a shot. Shooters can even make use of the 3.2" 1.62m-dot touchscreen LCD to simply tap to adjust the focus point. Furthermore, now that the camera has DCI 4K (4096 x 2160) video recording at up to 30 fps, users can snag 8.8MP stills from the video for an even faster capture option. Tied into the Dual Pixel sensor architecture is a brand new feature for Canon: Dual Pixel RAW, which allows for fine tuning of certain image parameters, including bokeh shift and focus micro adjustment, after the image is taken.
Imaging
Lens Mount Nikon F
Camera Format Full-Frame (1x Crop Factor)
Pixels Actual: 24.92 Megapixel
Effective: 24.5 Megapixel
Maximum Resolution 6048 x 4024
Aspect Ratio 1:1, 3:2, 16:9
Sensor Type CMOS
Sensor Size 35.9 x 23.9 mm
Image File Format JPEG, Raw
Bit Depth 14-Bit
Image Stabilization None
Exposure Control
ISO Sensitivity Auto, 100 to 51200 (Extended: 50 to 204800)
Shutter Speed Electronic Front Curtain Shutter
1/8000 to 30 Seconds
1/8000 to 900 Seconds
Bulb Mode
Time Mode
Metering Method Center-Weighted Average, Highlight Weighted, Matrix, Spot
Exposure Modes Aperture Priority, Manual, Program, Shutter Priority
Exposure Compensation -5 to +5 EV (1/3, 1/2 EV Steps)
Metering Range -3 to 20 EV
White Balance Auto, Cloudy, Color Temperature, Daylight, Flash, Fluorescent, Incandescent, Preset Manual, Shade
Continuous Shooting Up to 12 fps at 24.5 MP
Up to 7 fps at 24.5 MP
Interval Recording Yes
Self-Timer 2/5/10/20-Second Delay
Mirror Lock-Up Yes
Video
Recording Modes MOV/H.264
UHD 4K (3840 x 2160) at 23.976p/25p/29.97p
Full HD (1920 x 1080) at 23.976p/25p/29.97p/50p/59.94p/100p/119.88p
External Recording Modes 10-Bit
UHD 4K (3840 x 2160)
Full HD (1920 x 1080)
Recording Limit Up to 29 Minutes, 59 Seconds
Video Encoding NTSC/PAL
Audio Recording Built-In Microphone (Stereo)
External Microphone Input (Stereo)
Audio File Format AAC, Linear PCM (Stereo)
Focus
Focus Type Auto and Manual Focus
Focus Mode Continuous-Servo AF (C), Full-Time Servo (F), Manual Focus (M), Single-Servo AF (S)
Autofocus Points Phase Detection: 51 (15 Cross-Type)
Phase Detection: 273
Autofocus Sensitivity -3 to +19 EV
Viewfinder and Monitor
Viewfinder Type Optical (Pentaprism)
Viewfinder Eye Point 21 mm
Viewfinder Coverage 100%
Viewfinder Magnification Approx. 0.7x
Diopter Adjustment -3 to +1
Monitor Size 3.2"
Monitor Resolution 2,359,000 Dot
Monitor Type Tilting Touchscreen LCD
Flash
Built-In Flash No
Flash Modes First-Curtain Sync, Off, Rear Sync, Red-Eye Reduction, Slow Sync, Slow Sync/Red-Eye Reduction
Maximum Sync Speed 1/200 Second
Flash Compensation -3 to +1 EV (1/3, 1/2, 1 EV Steps)
Dedicated Flash System iTTL
External Flash Connection Hot Shoe
Interface
Memory Card Slot Dual Slot: SD/SDHC/SDXC (UHS-II)
Connectivity USB Type-C (USB 3.1), HDMI C (Mini), 3.5mm Headphone, 3.5mm Microphone
Wireless Bluetooth
Wi-Fi
GPS No
Environmental
Operating Temperature 32 to 104�°F / 0 to 40�°C
Physical
Battery 1 x EN-EL15b Rechargeable Lithium-Ion (Approx. 2260 Shots)
Dimensions (W x H x D) 5.65 x 4.55 x 2.99" / 143.5 x 115.5 x 76 mm
Weight 1.85 lb / 840 g
Item Digital Microscope 16MP camera
Objective 10A (Standard) 0.7Ã?-4.5Ã?
7010 0.7Ã?-4.5Ã?
CCD tube 0.5Ã? (1.0Ã?)
Digital Magnification 15Ã? - 90Ã? (30Ã? - 180Ã?)
Zoom Ratio 7 ï¼?1
Resolution 1920Ã?1080(adjustable) 60/FPS
Pixel 16MP
Image sensor 1/3 inch
Lighting 6V 5W ring LED
Video output HDMI and PC
Standard monitor 13" (included)
WD(Working distance) 90mm (Standard)
Base and Lifting parts Pillar Stand
Base size 360Ã?250mm
Camera Function "Taking photo, taking video, video play back,
remote control, TF card memory function, automatical zoom, connect with computer"
Item Digital Microscope 16MP camera
Objective 10A (Standard) 0.7Ã?-4.5Ã?
7010 0.7Ã?-4.5Ã?
CCD tube 0.5Ã? (1.0Ã?)
Digital Magnification 15Ã? - 90Ã? (30Ã? - 180Ã?)
Zoom Ratio 7 ï¼?1
Resolution 1920Ã?1080(adjustable) 60/FPS
Pixel 16MP
Image sensor 1/3 inch
Lighting 6V 5W ring LED
Video output HDMI and PC
Standard monitor 13" (included)
WD(Working distance) 90mm (Standard)
Base and Lifting parts Pillar Stand
Base size 360Ã?250mm
Camera Function "Taking photo, taking video, video play back,
remote control, TF card memory function, automatical zoom, connect with computer"
Item Digital Microscope 16MP camera
Objective 10A (Standard) 0.7Ã?-4.5Ã?
7010 0.7Ã?-4.5Ã?
CCD tube 0.5Ã? (1.0Ã?)
Digital Magnification 15Ã? - 90Ã? (30Ã? - 180Ã?)
Zoom Ratio 7 ï¼?1
Resolution 1920Ã?1080(adjustable) 60/FPS
Pixel 16MP
Image sensor 1/3 inch
Lighting 6V 5W ring LED
Video output HDMI and PC
Standard monitor 13" (included)
WD(Working distance) 90mm (Standard)
Base and Lifting parts Pillar Stand
Base size 360Ã?250mm
Camera Function "Taking photo, taking video, video play back,
remote control, TF card memory function, automatical zoom, connect with computer"
31234 Electronics Entertainment Suppliers
Short on time? Let Electronics Entertainment sellers contact you.
Laser cut Architectural Sheet Operated by advanced CNC equipment, produced uniform hole size without burs.
Surface can be treated by powder coated, Fluorine carbon spraied, Anodic Oxidation,
With the advanced computer control equipment, we can design and produce the products with all kinds of types, specifications according to customers request.
If you are finding architectural & decorative metal facade or spiral architectural wire mesh in China, we will be your best choose! We have our own factory, so we can give you a cheap price!
For more information on wire mesh, please click here.
Product Name: CO2 cutting engraving carving machine
Place of Product Suzhou ,China
Power : 100W /150W
Working area: 1300*900mm /1600*1000mm
Machine size: 1800*1200*1100mm
Laser Tube : Yongli 100W/150W
Total Weight 500kg-1000kg
Cutting head :Single/ double Head
Controller: Topwisdom
Driver JMC/Stepper/FUJI/servo Controlling method DSP
Communication Interface USB Cooling Method Water Cooling
Graphic format supported BMP,GIF,JPGE,PCX,TGA,TIFF,PLT,CDR,DMG,etc Compatible software Corel-Draw,Auto-CAD
Metal CNC fiber laser cutting machine
Quick Details(machine power and working area can customized)
Machine power: 500W/750W/1000W/2000W/4000W/6000W/12000W/15000W
Working Area: 3000*1500mm /2000*4000mm/2000*6000mm
Cutting Speed: 60m/min, 90m/min, 120m/min (Depens on machine power)
Graphic Format Supported: AI, PLT, DXF, BMP, DST, DWG, LAS, DXP
Cutting Thickness:1mm-22mm (according to material and machine power)
Total Weight: 2.5-7T
Working voltage :380v/50HZ
Place of Origin: China
Brand Name: YOSOON
Certification: CE, ISO, FDA,GS, SGS, UL, CCC
Laser Source Brand: IPG/RAYCUS/MAX/SPI/YOSOON
Laser Head Brand: Precitec/Raytools/Ospri/WSX/Yosoon
Servo Motor Brand: Fuji / Pansonic/Yaskawa, Japan
Guiderail Brand: Hiwin ,THK,PMI, Taiwan
Driving system(brand&name of origin): precision Bevel Rack and pinion-ROR Germany
Control System Brand: Cypcut /Backoff
Warranty: Whole machine 3 years, laser source 2 years.
After-sales Service Provided: Online/ Video technical support, Free spare parts, Field installation, commissioning and training, Field maintenance and repair service.If some customers have question about it. we will have professional technist to help them to install and teach how to use it.
D1 delivers cinematic images with stunning clarity even in the daytime with a 20% improved brightness of 750 ANSI Lumens in 4-channel optical Path Technology.Mstar 4-core high-end TV CPU is used for faster and smoother response ,delivering soft color temperature and resonable gamma parameters.HFR video optimization provides a more pleasing movie time at home.
1. Cut or shave hair to 1-2mm or ask patients to shave at home 2-3 days before treatment.
2. Clear treatment area.
3. Turn on machine, adjust the parameter, set it to 'standby' .
4. Put cooling gel on treatment area about 2mm.
5. 808nm diode laser: Wear protect glasses for patient and operator.
6. Shot the treatment area, let the crystal tip closely touch cooling gel, permitted to have 1/3 overlapping on treatment area.
7. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients feel warm or hot, you may put ice bag on treatment area until heat disappear.
German Laser Chip Hair Removal Machine Application:
755nm, most effective on white and more light color skin type
1064nm, made for treating darker and black color skin types
808nm, most effective for white to medium tan color skin types
All unwanted hair parts of the body, such as lip hair, whiskers, armpit hair, body hair, bikini hair.
More information you can click here
Wavelength 808nm, 755nm, 1064nm
Working frequency 1~10hz
Energy density 1-120J/cm²
Handle piece cooling TEC+Sapphire
TEC cooling 12V6A
Spot size 15*15mm/15*20mm/20*25mm/25*31mm ( optional )
Output power 600W,900W,1200W ( optional )
Laser chips Germany laser Jenoptik,150W/piece
Product Application
Suitable for plastic pipes, Electric cable, electronic components, electrical products, IT industry, auto parts, hardware tools products, precision instruments, gift accessories, medical equipment and other high-end products of precision, fine logo printing. Typical applications such as, plastic (PA66) insulation flying laser marking, plastics laser marking, packing box body online laser marking, medicine package & PET bottle laser marking, wooden material marking etc.
Description Of CYCJET LF30F Flying Laser Marking Machine
1; Laser oscillation in the FIBER optical wave, low dissipation, good stability and is not affected by external dust gas and mechanical looseness, the output of a laser beam is stable.
2; Processing speed is 2 to 3 times the traditional laser marking machine.
3; Wind cooling FIBER laser, no consumables, low maintenance, high photoelectric conversion rate, low consumption (600 w) or less, use cost.
4; Integrated design, small size (there are a whole cabinet and portable optional).
5; Environmental adaptation ability strong can be in vibration, shock, dust, humidity environment continuous work, easy to implement with optical FIBER coupling, which can realize remote work.
6; Bar code, QR code, graphics, text rules and irregular marking serial number, etc.
7; Software running on WINDOWS platform, Chinese/English interface, can be compatible with AUTOCAD, CORELDRAW, PHOTOSHOP software, such as PLT, PCW, DXF, BMP, etc, but also can be used directly SHX, ttf font.
Leapion fiber laser marking machine LF-20H use the world top brand parts,jcz ezcad control system , and imported high precision, high speed, large torque, performance is stable and durable, ensure the high speed operation of the whole machine., high power ,high precision.Top brand control system : automatic layout optimization.
Fiber Laser Marking Machine can mark logo, character, serial number, bar code, data matrix on both metals It does not have consumable. It's very cost effective. It boasts fast marking speed and high marking precision. It's widely used and well accepted in prevailing international market.
Pioneer cnc fiber laser cutting machine PF-3015S is specially designed laser cutter for carbon steel,stainless steel,aluminum,copper and other metal cutting demands.
PF-3015S laser cutter is suitable for 3000mmx1500mm plate steel cutting process. This machine is equipped with Raycus laser source,range from 1000w-4000w to suit different metal cutting thickness.Standard type will have Swiss Raytool laser head with auto focus function to higher working efficiency and cutting precision.Japan Yaskawa servo motor can ensure long time stable running condition,plate steel welded heavy duty machine bed can protect cnc laser cutting machine from deformation in longer lifespan.
This machine is widely used in steel fabric,kitchenware,fitness equipment,agricultural equipment manufactruing,lighting industry,metal craft cutting,automobile industry...etc.
High Speed Fiber Laser Tube Cutting Machine CNC Tube Laser Cutter For Sale
1.PG-6020L tube laser fiber cutting machine is professional tube cutting fiber laser machine, suitable for all kinds of stainless tube, round tube, square tube and oval tube.
2.It can satisfy various tube cutting process such as tube cutting-off,tube hole cutting,or any shapes cutting on tube surface.
3.The machine adopt Raycus laser source,Swiss Raytools auto focus laser head,Japan Yaskawa servo motor to give you perfect tube laser cutting performance meanwhile ensure long time stable running,less failure rate,maintenance costâ?¦etc
4.It can be also equipped with automatic material loading system to higher efficience,it is optional according to your demands.
High Power CNC Laser Cutting Machine Laser Cutter For Metal Processing
The series of pioneer PF-3025D laser cutting machine offers power ranges between 1000W to 10000W. One of the most efficient machine technologies for rapid sheet metal cutting which can cut the thickness for 50mm or less.
1. Saving Material ---- CNC control, it can cut the material in different shapes, improve the utilization rate and reduce waste.
2.Easy Programme ----high accuracy, cut to shape without molding, smooth finish, eliminating the process for edge modification.
3. Save Investment for Molding ---- Laser cutting without molding, eliminating the cost for molding and repair, save time, resulting in less manufacturing cost, reduce the cost of goods sold, particularly suitable for processing parts in large-size.
4. Protecting Environment ---- working area for laser cutting is fully enclosed, low noise, is clean, safe, free of pollution, totally improve the working condition and environment.
This PFG-3015D double-platform laser cutting machine is a fully enclosed laser cutting machine combining with tube cutting function.Full enclosure design can not only reduce the damage of laser radiation to workers, but also effectively prevent metal debris splash from causing damage to operators.The maximum power of this metal laser cutting machine can reach 20000W. It can be used for cutting, punching and engraving various precision parts and machine panel.The metal crafts processed by the optical fiber laser cutting machine have little heat effect on the cutting seam and generally do not need secondary processing.
Application Materials
Fiber Laser Cutting Equipment is suitable for metal cutting like Stainless Steel Sheet, Mild Steel Plate, Carbon Steel Sheet, Alloy Steel Plate, Spring steel Sheet, Iron Plate, Galvanized Iron, Galvanized Sheet, Aluminum Plate, Copper Sheet, Brass Sheet, Bronze Plate, Gold Plate, Silver Plate, Titanium Plate, Metal Sheet, Metal Plate, Tubes and Pipes, etc
Application Industries
Machines are widely used in manufacture Billboard, Advertising, Signs, Signage, Metal Letters, LED Letters, Kitchen Ware, Advertising Letters, Sheet Metal Processing, Metals Components and Parts, Ironware, Chassis, Racks & Cabinets Processing, Metal crafts, metal art ware, elevator panel cutting, hardware, auto parts, Glasses Frame, Electronic Parts, Nameplates, etc.
DV8919 is a 4K OTT TV Box running on Android TV 10.0 Q OS, support Custom Android TV Operator Tier Launcher, designed for Telecom, Broadcasting and Pay TV operators.
Software
Built in lots of content and entertainment, such as YouTube, Play Movies & TV, Google Play Music, etc.
Official Android TV OS has a better compatibility of software, games and application programs
Provides maintenance-free Android TV Platform and cost-saving solution to operators
Short time to market, rapid innovations of features, bring ultimate TV watching experience
SDMCs XMediaTV platform could provide fast customization for operators
Hardware
Quad-Core 64-bit CPU
4Kp60 10-bit H.265; 4Kp60 VP9 Profile2 Decoding
HDMI 2.1, CEC, HDCP2.2
Streaming Protocol: RTCP, RTMP, RTP, RTSP, UDP, HTTP, DASH, HLS, Smooth streaming
DRM:Widevine, Playready; Verimatrix Optional
Air Remote: Can use the android and iOS mobile phone to control
System upgrading: Upgrade software via USB or network
Product Information
Capture scenic photos with the Canon EOS Digital SLR Camera. This DSLR camera has 12.2-megapixel resolution, producing incredible photos from your adventures. Great for capturing photos of distant objects, it is built with 3.1x optical zoom so that you can focus on images without reducing the quality of your pictures. This digital SLR camera features a USB port, which enables you to easily show your photos to your friends. Take impressive photos with this Canon EOS Digital SLR Camera.
Product Identifiers
Brand Canon
MPN 5161B030AA
EAN 8714574570181
Model EOS 1100D
Product Key Features
Optical Zoom 3.1x
Features AF Lock, 720p HD Video Recording, DPOF Support, Direct Print, Eye-Fi Card Ready, Auto Power Save, Histogram Display, PictBridge Support
Series Canon EOS
Colour Black
Manufacturer Colour Black
Battery Type Lithium-Ion
Screen Size 2.7"
Type Digital SLR
Connectivity USB
Megapixels 12.2MP
