Maintains highest HDMI single link video to supports HDTV resolution up to 1,080p, and supports VGA, SVGA, SXGA(1280x1024) UXGA(1600x1200) Frequency bandwidth: 10.5Gbps Power Supply: DC 6V, 1A adapter. Supports DDWG standard for HDMI compliant monitors. Support long length cable up to 15m Inputs: HDMI A type 19pin, female, 5 ports, 3 ports for alternatives. Output: HDMI A type 19pin, female, only one port available. Dimension:(LXWXH) 181x78.5x24.5mm Weight 380g.
Mini HDMI Switcher.5 input 1 output. Compact size.No need of remote. Signaling rates up to 2.25GbitsX3 in support of 1080P display. 8dB receiver equalization to compensate for 5m HDMI cable losses. 3dB driver pre-emphasis to compensate for PCB losses. Each port supports HDMI or DVI inputs. HDCP compliant. HDMI 1.3.
3-in-1-out Mini HDMI Switch 1. Compact size. 2. Auto switching. 3. No power supply. 4. Distribute any of the three input signal to the output port. 5. Manual selection button offered. 6. Signaling rates up to 2.25*3Gbits in support of 1080P display. 7. Super receiver equalization to compensate up to 20m HDMI cable losses. 8. 3dB driver pre-emphasis to compensate for PCB losses. 9. Each port supports HDMI or DVI inputs. 10. HDCP compliant. HDMI 1.3 Dimensions:62mmW*62mmH*19mmD Mass(main unit):40gs
Mini HDMI Switcher.3 input 1 output. Compact size. No need of remote. Signaling rates up to 2.25Gbits in support of 1080P display. 8dB receiver equalization to compensate for 5m HDMI cable losses. 3dB driver pre-emphasis to compensate for PCB losses. Each port supports HDMI or DVI inputs. HDCP compliant. HDMI 1.3
These switches have a normally open contact which closes when the switch reaches the acceleration/activation level. 14"x9"x12"
Float switches are used to monitor liquid levels by opening or closing when a desired action point is reached. A variety of types are available using mercury and non-mercury tilt switches and, also, permanent magnets and reed switches. Common applications include sumps, pump-control systems, bilge pumps, below ground vaults and irrigation systems. 14"x9"x12"
Motion sensors (also known as vibration sensors )are very similar in design to tilt switches; in fact, some tilt switches are used as motion sensors. The sensor will be in one condition (open or closed) at rest. When it is subjected to motion it will continually change state as long as it remains in motion. Some common applications include: anti-theft devices, man-down alarms to detect non motion, smart appliances to turn off power when not in use and portable equipment to do the same. 14"x9"x12"
Tilt switches are used to sense movement (tilt) of a device above and below a horizontal axis. A typical use is in a thermostat. A glass mercury switch is mounted to a bi-metallic spring which expands and contracts with temperature. As the spring moves, the switch contacts pass through the horizontal plane, opening or closing to operate the furnace or boiler. The angle through which the switch must move for proper operation -the differential angle- is measured from the point of just make to just break; it is specified as a maximum. When selecting a tilt switch, it is important to ensure that the operating mechanism can move the switch through an angle greater than the differential angle. Some additional applications include: level controls, appliances, security alarm systems, toys and games, float switches and water-treatment equipment (non-mercury). 14"x9"x12"
Tip over switches sense tilt over 360 degrees of a vertical axis. A common use is in portable heaters used in the home to prevent electrical shock or fire. When the heater tilts more than a specified angle, the switch operates turning the heater off. This angle, called the operating angle, describes the angle from vertical to the point of contact operation, subject to a tolerance, ie:45 degrees plus-minus 10 degrees(35 degrees to 55 degrees). Both normally closed(tilt to close) switches are available. Some additional applications include: portable lamps, pc anti-theft devices, vending-machine alarms and machinery security systems. 14"x9"x12"
The hbs line of reed switches is the comus groups answer to the market demands for a lower cost reed switch that is still capable of handling high voltage applications. The hbs line of reed switches is ideal for certain markets such as medical applications; for example defibrillation equipment where high reliability and excellent quality is absolutely essential. 14"x9"x12"
Proximity switches and sensors use a reed switch and a permanent magnet. Each is encased in a plastic housing for protection and ease of mounting. A classic use is sensing the opening of a door in a security system. A reed switch in the jamb and a permanent magnet in the door complete a circuit when the door is closed. Opening the door breaks the circuit. 14"x9"x12".
A reed switch consists of two ferromagnetic and specially shaped contact blades(reeds) positioned in a hermetically sealed glass tube with a gap between them and in a protective atmosphere. The plated contact surfaces are isolated from the outside environment, which protects the contacts from contamination. Reed switches are available as form a (normally open) and form c (changeover), and are operated using a magnetic field generated by either a permanent magnet or current-carrying coil. The features that make the reed switch a valuable tool include compact size, low weight, quick response time, long life and low cost. Some common applications are: reed relays, automotive sensors, robotics sensors, security sensors and toys and games. They are also available in moulded packages affording protection from damage and in surface mount styles. 14"x9"x12" 4"x2 1/2"x1 3/4"
Electronic control panel for submersible pump for operation of 0.50 hp to 3 hp 1 phase and electrical coustomise panel up to 150 hp in 3 phase. Quality component used in panel for long lastings result and for customer satisfaction Panels are available in diffrent lot size according to hp wise but 1 box contain min. 20 pcs. Weight n dimension are veries according to product specification
LF10-L pressure switch is a pressure-operated electric switch for use in regulating the tank pressure between two preset values on electrically driven air compressors. It is available with an unloader valve, which prevents compressors from starting under load, and an on-off button for manual cut off the compressor. A four-port manifold style is available which provides a means for easy mounting of valves and gauges. Specifications: MODEL LF10-L1H LF10-L4H Media Air Air Operating Pressure 0.5~1.2Mpa 0.5~1.2Mpa Differential Pressure 0.2Mpa 0.2Mpa Factory Setting 0.6~0.8 Mpa 0.6~0.8 Mpa Electrical Rating 240V, 20A, 50Hz 240V, 20A, 50Hz Contact Arrangement Normal On(NC) Normal On(NC) Port Connection one port four ports Pipe Fittings G1/4, G3/8 or 1/4, 3/8 NPT Female G1/4, G3/8 or 1/4, 3/8 NPT Fe.
Rotary switch.
Rocker switch.
Tip-over switch..
Salient Features: * 4 /8/12Lamps * 1 Fan * Fan Speed Control * Fan Speed 7 Segment Display optional * Inverter supply compatible * Very rugged/functions perfectly without being effected by noise and other line disturbances. * Low Cost * Kits available * 4 remote options ready * Any remote can be used (preprogrammed as per requirement)
Receive 2 ku band satellite tv programs Connect to 8 satellite receiver No need ac power input Water proof Easy out door environment installation Cascade and stand alone both ready Cost effective structure design Global patent
Receive 2 KU Band Satellite TV programs Connect to 12 Satellite Receiver No need AC power input Water proof Easy out door environment installation Cascade and Stand Alone both ready Cost effective structure design Global patent
