Product name 10TP583T operating temperature - 20 c to + 100 cpackage / case to-18 brand semitec mounting style through hole detectivity d-star at 500 f 14.7e7 cm hz1/2 / welement size1.05 mm x 1.05 mm noise equivalent power - nep2.2 nw/hz 1/2 photo sensitivity15 v/w height 2.85 mm length5.6 mm operating temperature range- 20 c to + 100 c
Supplier of walk-in environmental test chamber. Designed to perform high-temperature operations for large-sized test specimens. The multipurpose walk-in chamber is the perfect site for testing the components against humidity, temperature, and various climate conditions.
General product A temperature sensor is a sensor that senses temperature and converts it into output signal. The temperature sensor can accurately measures the ambient temperature and is widely used in agriculture, industry, workshops, warehouses and other places. This product measures the change in ambient temperature and outputs the temperature change value in the form of RS485 digital signal through inter processing. This product provides a temperature query command and provides digital signals at the same time. This product adopts RS485 half-duplex communication interface and is compatible with terminals with RS485 communication interface on the market, which is convenient for collecting temperature signals. The product has the characteristics of simple structure and convenient installation. Scope of application A variety of industries that require temperature, such as the food transportation industry, the pharmaceutical transportation industry, and temperature sensitive article storage industry. Parameter description supply voltage:DC9-30V supply current:
General product A temperature sensor is a sensor that senses temperature and converts it into output signal. The temperature sensor can accurately measures the ambient temperature and is widely used in agriculture, industry, workshops, warehouses and other places. This product measures the change in ambient temperature and outputs the temperature change value in the form of RS485 digital signal through inter processing. This product provides a temperature query command and provides digital signals at the same time. This product adopts RS485 half-duplex communication interface and is compatible with terminals with RS485 communication interface on the market, which is convenient for collecting temperature signals. The product has the characteristics of simple structure and convenient installation. Scope of application A variety of industries that require temperature, such as the food transportation industry, the pharmaceutical transportation industry, and temperature sensitive article storage industry. Parameter description supply voltage:DC9-30V supply current:
General product A temperature sensor is a sensor that senses temperature and converts it into output signal. The temperature sensor can accurately measures the ambient temperature and is widely used in agriculture, industry, workshops, warehouses and other places. This product measures the change in ambient temperature and outputs the temperature change value in the form of RS485 digital signal through inter processing. This product provides a temperature query command and provides digital signals at the same time. This product adopts RS485 half-duplex communication interface and is compatible with terminals with RS485 communication interface on the market, which is convenient for collecting temperature signals. The product has the characteristics of simple structure and convenient installation. Scope of application A variety of industries that require temperature, such as the food transportation industry, the pharmaceutical transportation industry, and temperature sensitive article storage industry. Parameter description supply voltage:DC9-30V supply current:
Why I need it? High relative humidity can cause significant, possibly irreparable damage to sensitive equipment, supplies, and products. To ensure dehydration measures work, humidity indicator cards measure the relative humidity (RH) inside sealed packages to allow immediate visual inspection of whether it has sustained unsafe humidity levels. Why I need choose your product? Existing humidity indicator cards found in the market are impregnated with a chemical called cobalt chloride In the dry state, cobalt chloride is blue in color. After absorbing moisture cobalt chloride changes to pink color. A recent amendment made to the European CEE directive 67-548 pertaining to the Classification, Packaging and Labeling of dangerous materials, has classified cobalt chloride as a carcinogenic material. Improper handling of items containing carcinogen may cause health hazards and environment hazards, thus, goods containing cobalt chloride will not meet EU standards. Our new range of humidity indicator cards are carcinogen-free and meet EU standards and color change can be blue to pink, yellow to azure, blown to green. Advantage: Reversible Competitive price Bright color; high recognition Meet ROHS, EU standards, SGS A back film to prevent chemical to reverse to your products Using environmentally friendly ink and moisture-sensitive chemical Usage : 1. The humidity indicator spots will change from blue (dry condition) to pink (humidity condition) as the relative humidity changes in the volume of air surrounding the indicator. 2.Relative humidity is indicated at the lavender color. 3.Indicator spots will change within eight hours of being exposed to a change in relative humidity. 4.The humidity indicator spots are reversible, and the pink spots will change back to blue when the volume of air is dried. Humidity indicator cards with pink or lavender spots can be returned to a blue color by placing indicators in a sealed container with 33 grams (1 unit) of desiccant for four hours. However, we do not recommend reversing or using cards that have been exposed to high humidity in excess of 60 percent. 5.The highest humidity indicator spot should be blue before being put into use. 6.The humidity indicator will be at its most accurate at a temperature of 23 degrees Celsius 72 degrees Fahrenheit. 7.Avoid contact with indicator spots. Wash any irritated areas with clean water.
The US-series ultrasonic sensor uses the principle of high-frequency ultrasonic linear propagation to detect the edge position of the coil. Compared with the photoelectric sensor, it is not affected by the transparency of the materials, so it is very convenient to use without calibration. 1. Support analog/switch output, can be used with EPC-A10 or EPC-D12 correction controller 2. Suitable for opaque, transparent, ultra-transparent film edge application 3. No need to manually adjust the calibration 4. 200K ultrasonic beam 5. 1ms reaction time 6. The detection range is 5mm, the detection accuracy is 0.1mm 7. With offset display Order Details Item Name: US-400S/US-500 Ultrasonic Sensor MOQ(Minimum Order Quantity): 1pc Lead time: 1-2 days after receiving the deposit Calculated Packing Size: 20cm*10cm*10cm,1.5kg/pc Package: Carton/Wooden Box Price Term: EXW,FOB, CIF, etc Payment term: TT, L/C,Western Union Country of Origin: China
Type:Temperature Sensor Car Make:MITSUBISHI OE NO.:MC850070;31390-00100 Place of Origin:Zhejiang, China (Mainland) Brand Name:ANT Model Number:CTS-041 Warranty:12 Months Sensor Type:Water Temperature Sensor 1OE NO.::MC850070 2OE NO.::31390-00100 Payment:Union.Paypal TT Shipping Term:DHL FEDEX EMS UPS Packing:Neutral Packing Quality:High-Quality Size:OEM Size
OEM: 036906262t TB NO.: 2912502A Sensor Type: 5 wire wideband oxygen sensor Fitting: For SEATIBIZA IV (6L1) (2002/02 - 2009/11) For SEATCORDOBA (6L2) (2002/09 - 2009/11) For SKODAFABIA (6Y2) (1999/08 - 2008/03) For SKODAFABIA Combi (6Y5) (2000/04 - 2007/12) For SKODAFABIA Saloon (6Y3) (1999/10 - 2007/12) For POLO (9N_) (2001/10 - 2012/01) For POLO Saloon (9A4) (2002/09 - /)
HIGH PERFORMANCE TRUCK RADIATOR FOR MITSUBISHI CANTER 5.2D 4M51 02- AT OEM: NISSENS : Year : OEM : Car Make : MITSUBISHI Inquire Download Email Product Description Products you may also interested in MOQ :30 PCS Port :Nanjing or Shanghai BT NO. :UT-BS-0245 Supply Ability :600000 sets/year Core Size :520*518*48AT Place of Origin :Jiangsu, China Application :CANTER 5.2D 4M51 02- AT DPI No : Warranty :12 months Packaging :Carton Box or as your request Delivery :45 days
Spo2 sensor Specifications: Plug ( patient side) : d-sub 9pin male. Cable material: 30awg/2c+30awg/1p+shield Sensor: 660nm/905nm Precision: 1%(between70%~90%) www.hsmedco.com
We have for immediate delivery 3000 Metric tons of used Oil rig anchor chain
new lika absolute encoder electronic sensor encoder ATI HANDELS GMBH registered in Germany with the Company reg no HRB114892 HAMBURG. It can be contacted at Germany, Raboisen 16, c/o ETL International GmbH, 20095 Hamburg. It's current status is active. Company was founded 18.08.2010 (5 years and 9 months ago). the brand we can do is Sprint Electirc,Roessel,MP Filtri,Conatex,easy lift,Albrecht ,Di-Soric,Stieber,Kostyrka,Votech etc. and what we sell are valve,switch,timer,pump,coupling,generator,clutch,pump head,sensor,rake pads,cylinder,relay,analyzer,motor
UV Flame sensor is fire detect sensor which detecs ultraviolet rays of a flame instantly and output warning signal outside. By using emergency call equipment or adjusting the sensor connection, SKH-)$& can supervise multiple sensors at a long range.
Typical vehicle detection application using magnetic sensor and earth' field are: replace loop sensor. The VDS100 has been specifically designed and engineered for use in the demanding Traffic control industry. With standard operations including: 2 Channel input ports, 2 channel ouput ports and selectable presence time options(1~60 sec)
Humidity sensor, as an important chemical sensor, which is widely used in fields of warehousing, industry production, and process control, environmental monitoring, home appliances and meteorology etc. inner: plastic foam outside: carton
Detection gas CO Measurement Range 0~1000ppm Max detecting concentration 2000ppm Sensitivity (3~12)nA/ppm Resolution ratio 1ppm Response time(T90) 30S Load resistance(recommend) 1000 Repeatability
Items Technical parameter Detection Range a1000ppm Max detecting bound 2000ppm Detecting life 5 years Sensitivity 0.015 Resolution 0.5ppm Temperature range Pressure range Normal atmosphere Response time(T90)
Model No. RD-622 Standard Encapsulation: TO-5 Infrared receiving Electrode 1mm, 2 sensitive elements Window Size: 4mm Receiving Wavelength: 7-14 Transmittance >75% Output signal peak[Vp-p] 3500mV Sensitivity 3200V/W Detection Rate (D*): 1.4 108 cmHz1/2/W Noise peak[Vp-p]:
Application Humidity sensor, as an important chemical sensor, which is widely used in fields of warehousing, industry production, and process control, environmental monitoring, home appliances and meteorology etc. inner: plastic foam outside: carton
