Repeater, booster, amplifier.
Speaker grill.
Horizontal driller machine and spare parts.
Dynamic Strain Amplifiers ModelCJ3818D Channels4,8,16,32,64 Bridge Resistance60-10000 Input Range0 - ±50000 Output Range±5VP/5mA Noise3V StabilityZero ±0.1V/??; ±0.1%/F.S/2h Sensitivity±0.01%/F.S//??; ±0.1%/F.S/2h Bridge Voltage1,2,3,4,10VDC/50mA GainSteps100,300, 1000,3000 Accuracy±0.5% Nonlinearity0.1% FS Balance (Resistance: Within 1%)Auto: ±5000 Measurement ModeDC,AC,PK+,PK- Frequency RangeDC-300kHz Low-Pass Filter(-3dB,-12dB/OCT)30,100,300,1k,3k,10k,100k,300kHz Operating EnvironmentOperating Temperature: -10 to 50??; Humidity: 85% R.H. Power SupplyAC220V50Hz Dimensions(mm)499W Ã?177HÃ?377D Weight6.5kG Input/Ouput TypeInput:7-Pin Socket Output: LBNC
Gaming PC, PC, desktop computer, gaming computer.
Electronic Hardware, General Electronics.
Audio mixer, powered audio mixers.
Audio amplifier.
Amplifiers.
Automotive chassis straightening bench,truck frame straightening machine,auto body floor pulling system,frame repair systems for heavy vehicles.
Professsional power amplifier manufacturer 2*1500w at 8ohms Also available at 4ohms and 2ohms using Suitable for outdoor events
100% Digital processing for exceponal sound quality Bluetooth Open-fit APP provided: -Volume control -Memory switch 2 channels WDRC amplifier 12 bands frequency shaping Low battery warning Open-fit design,easy operating Rocker Switch Wideband MPO Low current consumpon Advantages Digital open-fit Bluetooth
Audio Precision ATS-2 Audio Test Set Condition Used in good working condition Option: APIB/USB adapter
Roland TD-30KV-S V-Pro Electronic Drum Kit Roland TD-30KV-S V-Pro Electronic Drum Kit with all original parts and accessories! Package content are: Drum Sound Modpe TD-30 x 1 V-Kick KD-140-BC x 1 V-Pad (Snare) PD-128S-BC x 1 V-Pad (Tom1, Tom2) PD-108-BC x 2 V-Pad (Tom3, Tom4) PD-128-BC x 2 V-Hi-Hat VH-13-MG x 1 V-Cymbal Crash CY-14C-MG x 2 V-Cymbal Ride CY-15R-MG x 1 Drum Stand MDS-25 x1 (included in the US) Hardware Items Needed to Complete the set: Hi-hat stand Bass Drum Pedal Snare Stnad Drum throne
JBL 4345 Studio Monitors The JBL 4345 4way studio monitors are in great working condition. These are 4 way system designed for full range or biamplified operation w/ 18" woofers, 10" mids, 2" compression drivers & ultra high tweeters. These are very heavy and local pickup preferred but will ship. PLEASE LOOK AT PICS and judge for yourself. Scheme: 4 ways, 4 loudspeaker bass-reflex scheme, and a floor type Unit: For low-pass: 46cm cone type (2245H) For inside low-pass: 25cm cone type (2122H) For mid-high ranges: Horn type (2420+2307+2308) For high regions: Ring type (2405) Frequency characteristic: 32Hz-20kHz±3dB Directivity (horizontal x vertical): 60 degrees x 30 degrees (-3dB, 16kHz) Output sound pressure level: 95dB/W/m Impedance: 8ohms Allowable input: 120W (at the time of a network) 200W (multi-amplifier Lo) 100W (multi-amplifier Hi) Cross over frequency: 320Hz, 1.3kHz, 10kHz (at the time of a network) 290Hz, 18dB / oct (at the time of multi-amplifier) Enclosure dimension: 253L (Woofer) 14L (mid Woofer) Dimensions: Width 765x height 1096x depth of 470mm Weight: 112kg (at the time of an original packaging)
DLP Dolby Lake Processor LP4D12 4in 12Out unit work perfectly and looks great. ships in the original factory cardboard box. comment: 1 card with 4 analog input 3 card with 4 analog output the voltage is100 to 240 volt 50/60HZ very good used condition Number of Channels: up to 8 in / 16 out Connectivity: AES/EBU Digital In, AES/EBU Digital Out, S/PDIF Digital In, USB Interface, XLR In, XLR out Form factor: rack mountable
Eventide H8000FW 8-channel ultra-harmonizer effects processor Th processor provides high-quality 24-bit audio performance and over 1,600 preset effects algorithms including presets for 5.1 surround sound. The H8000FW features UltraShifter, Eventides most natural-sounding, formant-corrected pitch changer which is optimized for voice and includes automatic pitch correction. FireWire ports deliver computer interactivity with graphic computer
Main Feature: 1. Fashion front panel is made of brushed aluminums alloy; 2. Sturdy steel case can shield the electromagnetic interference from outside; 3. Strong multi-protection mechanism including radiating protection, short circuit protection and switch delay protection; 4. Powerful output capacity to achieve driving bass, mellow alto and clear treble; 5. Multistage power transmission combines H technology and topology will led to clear and driving sound, and reduces electric consumption; 6. Design of optimized switching power supply makes the amplifier smaller and easy to be installed; 7. High quality connectors guarantee perfectly signal transmission by firming conjunction; 8. It's suitable for large performance, pubs, KTV rooms and large conference rooms etc. Technical Specifications: 8O stereo(per channel) (1kHz(EIA)with 0.5%THD):2*800W 4O stereo(per channel) (1kHz(EIA)with 0.5%THD):2*1200W 8Obridge mono (1kHz(EIA)with 0.5%THD):2400W Voltage Gain: 5dB Total Harmonic Distortion(THD):< 0.5%,20Hz-20kHz Intermodulation Distortion(IMD):?0.35% Slew Rate:>10V/us Frequency Response (at 1 Watt): 20Hz-20kHz,+0/-1dB Damping Factor (8 O), 10Hz-400Hz >200 Signal-to-Noise Ratio (below rated power,20Hz -20kHz, A-weighted ): >100dB Crosstalk (below rated power) At 1 kHz At 20 kHz:-75dB -59dB Input Sensitivity for full rated power at 8O: 0.775V or 1.4V Input Impedance (nominal) Balanced / Unbalanced: 20kO / 10kO Input Connectors: Once balanced XLR per channel Output Connectors(Speaker Connectors): 4-POLE Speakon per channel Front Panel Controls: Power on/off switch, one gain control per channel Rear Panel Controls: Power on/off switch ,one gain control per channel Input sensitivity switch:0.775V or 1.4V Power Indicator Signal Indicator: One red LED of work, One green LED per channel Clip(peak) Indicator Fault Indicator: One yellow LED per channel, One red LED per channel Protection: Protection against short circuits, no-load, on/off muting, Rf interference. Stable into reactive or mismatched loads
Main Feature 1. Fashion front panel is made of aluminums alloy with metal wiredrawing craft surface treatment; 2. Sturdy steel case can shield the electromagnetic interference from outside; 3. Strong multi-protection mechanism including radiating protection, short, circuit protection, switch delay protection; 4. 4 channels output and 800W rated power of per channel can achieve driving bass, mellow alto and clear treble; 5. Multistage power transmission combines H technology and topology will led to clear and driving sound, and reduces electric consumption; 6. Design of optimized switching power supply makes the amplifier smaller and easy to be installed; 7. High quality connectors guarantee perfectly signal transmission by firming conjunction; 8. It's suitable for large stage performances, pubs, KTV rooms and conference halls etc. Technical Specifications 8O stereo(per channel) (1kHz(EIA)with 0.5%THD):4*800W 4O stereo(per channel) (1kHz(EIA)with 0.5%THD):4*1100W Frequency Response ref 1k: THD+N:20Hz-20kHz,+0/-1dB < 0.5%,20Hz-20kHz Voltage Gain: 38.3dB Intermodulation Distortion(IMD): ?0.35% Slew Rate: >10V/us Damping Factor (8 O), 10Hz-400Hz >200 Signal-to-Noise Ratio (20Hz -20kHz): >100dB Crosstalk (1 kHz, 20 kHz): -75dB -59dB Input Sensitivity for full rated power at 8O: 0.775V or 1.4V Input Impedance (nominal) Balanced / Unbalanced: 20kO / 10kO Input Connectors: Once balanced XLR per channel Output Connectors(Speaker Connectors): 4-POLE Speakon per channel Front Panel Controls: Power on/off switch, one gain control per channel Rear Panel Controls: Power on/off switch ,one gain control per channel Input sensitivity switch:0.775V or 1.4V Power Indicator Signal Indicator: One red LED of work, One green LED per channel Clip(peak) Indicator Fault Indicator: One yellow LED per channel, One red LED per channel Protection: Protection against short circuits, no-load, on/off muting, Rf interference. Stable into reactive or mismatched loads Ventilation: Flow-through ventilation form front to back Cooling: speed regulated ,thermal protection
Main feature: 1. Class d digital technology with high efficiency, save energy and run in low temperature. 2. Balanced input xlr stereo (two ways) has two modes for selection, one is stereo and the other is bridging. 3. Functions of independent limiting, overload, overheating will protect the circuit. 4. Using ntc soft start up and pfc automatic voltage regulator circuit, so that it can work in ac-90v-240v. 5. Every channel has protection function for over voltage, overheating and overload. 6. Automatic limiting function can prevent the speaker from being damaged. 7. The class d amplifier performs surprisingly with the driving bass. 8. Equipped with high quality imported components. Technical specifications: Noise:20hz-20khz Operation mode: knob control Channel:2 channels Stereo output power 8o:1000w+1000w Stereo output power 4o:1800w+1800w Stereo output power 2o:2000w Bridged output power 8o:3600w Bridged output power 4o:4000w Frequency response:20hz-20khz±1db Thd+n (10%-1khz): < 0.1% Sr:>20v/µs Noise insulation factor (1khz):>250 Dynamic range:=95db Snr: =95db Input sensitivity: 2vrms Input impedance: balance 20k / unbalance10k Power specification: ac 90-240v 50-60hz (±10%) Packaging info.: Net weight: 20kg Gross weight: 23.65kg Quantity/ carton: 5pcs Packaging details:carton with plastic bag inside Packaging size: 560(l)×280(w)×410(h)mm
