Find Verified Electronic Antenna Suppliers, Manufacturers and Wholesalers

GPS Antenna

GPS Antenna

GPS Antenna

Specification:

Receiving Frequency:
VHF 1-12CH UHF 13-62CH
VHF 17-20dB UHF 17-20dB

Input Voltage: DC 12V
Impedance: 75
Aerial Length: 55cm

Outdoor antenna

Gain:vhf18-21db uhf 20-23db
Frequency range:45-860mhz
Output impendance:75
Standing wave ratio:<1.5
Working voltage:ac 110v/220v+_10%

Gsm antennas for m2m application. All the antennas can be customized for cable length, connector, gain options. For detailed information please contact us.

Guanhua antenna



Vhf(150mhz), uhf(450mhz), dvb(150-800mhz), cdma(800mhz), gsm(900mhz), dcs(1800mhz), phs.Pcs(1900mhz), umts , gps , wlan, wiwax(1.9-5.8ghz)

PDJ-PST2400-24-06

Frequency range: 2400~2483MHz
Bandwidth: 83MHz
VSWR: 1.5
Gain: 24dBi
Max Power: 100W
Polarization: Vertical or Horizontal
Horizontal Bandwidth: 10
Vertical Bandwidth: 14
F/B ratio: 31dB
Input impedance: 50
Connector: N-K
Size: 0.6*0.9m
weight: 2.5kg
Resist the intensity of wind: 60M/S


0.6*0.9m

Frequency range: 2400~2483mhz
Bandwidth: 83mhz
Vswr: 1.5
Gain: 24dbi
Max power: 100w
Polarization: vertical or horizontal
Horizontal bandwidth: 10
Vertical bandwidth: 14
F/b ratio: 31db
Input impedance: 50
Connector: n-k
Size: 0.6*0.9m
Weight: 2.5kg
Resist the intensity of wind: 60m/s


0.6*0.9m

Frequency range: 2400~2500mhz
Bandwidth: 100mhz
Vswr: 1.5
Gain: 9dbi
Max power: 200w
Polarization: horizontal or vertical
Horizontal bandwidth: 90
Vertical bandwidth: 8
F/b ratio:25db
Input impedance: 50
Connector: n-k
Size: 260*160*60(mm)
Weight: 1.1kg
Resist the intensity of wind: 60m/s


260*160*60(mm)

Antenna trainer

Experiments that can be performed
01. Polar plots & polarization.
02. Wave modulation & demodulation.
03. Antenna gain.
04. Antenna beam width.
05. Element current Study.
06. Front-back ratio study.
07. Antenna matching.
08. Antenna radiation with distance.
09. Antenna Fabrication Study.
10. SWR Measurement.
SPECIFICATION & FEATURES
1.0. Antenna Trainer consists of the following built-in parts:
1.1 RF Generator - 750 MHz Approx. (Output Adjustable)
with Level Display on DPM.
1.2 Modulation Signal -1KHz approx. Sine wave
(Output Adjustable).
1.3 Slot Line Matching Stub - Slider Type.
1.4 Directional coupler - Forward and Reverse
( Selectable ).
1.5 Antenna Rotation - 0-360 Deg.Resolution 1 dig.
1.6 RF Output Connector - 75 ohm.
1.7 Main ON/OFF Switch and Jewel light for power Indication
and Power Cord.
1.8 Power supply -230V AC 10ª% 50Hz.
2.0. RF Detector with Level Adjustable Analog Meter with
Mounting Stand.
3.0. Antenna Fabrication Kit Including to PCB's and
+ Kg.14 S.W.G. wire roll.
4.0 Good Quality, reliable terminal/sockets are provided at
appropriate places on panel for connections / observation
of waveforms.
5.0 Strongly supported by detailed Operating Instructions,
giving details of Object, Theory, Design procedures,
Report Suggestions and Book References.
ANTENNAS ACCESSORIES
Transmitting Antennas Type AT -1001- ........
01. Simple Dipole l / 2
02. Simple Dipole l / 4
03. Simple Dipole Antenna 3/2l
04. Folded Dipole
05. Yagi UDA Folded Dipole (3 E)
06. Yagi UDA Simple Dipole (5 E)
07. Yagi UDA Simple (7 E)
ANTENNA TRAINER
OMEGA TYPE AT - 1001
08. Yagi UDA Folded Dipole (5 E)
09. Hertz Antenna (Horigental end Fed)
10. Ground Plane Antenna
11. Slot Antenna l / 2
12. Loop Antenna
13. Rhombus Antenna
14. Helix Antenna
15. Phase Array l/2 Antenna
16. Phase Array l/4 Antenna
17. Broad Side Array
18. Combined Collinear Array
19. Log Periodic Antenna
20. Simple Dipole Cut Paraboloid Antenna
21. Zeppline Antenna (Horigental end Fed)
OTHER ACCESSORIES
01. Current Probe comprising of two PCBs
Connected by Shielded Cable.
02. Transmitter Mast
03. Detector Antenna:(Folded dipole with reflector)
04. BNC-Tee
05. BNC-BNC adapter M
06. BNC-BNC adapter F
07. BNC-BNC cable-18"
08. Operating Manual & workbook
09. Accessories case
10. Patch Cord
11. Polar Graphs( 25 Nos.)
12. Polar Graphs (For Normalised Reading)(25 Nos.)
13. Allen key
14. Aligner Taparia 911( Duly filed )
15. Text Book "Antennas"

110 kgs

TV antenna
With booster

6 pcs per cartoon boxes

Electrical
GPS Part: Dielectric Antenna
Frequency Range 1575.42MHZ±3 MHz/1602-1610MHz
Polarization Type RHCP
Gain 5dBi
V.S.W.R

Electrical
Frequency Range 698-960/1710-4000MHz
F/B Ratio 16dB
Gain 6dBi
V.S.W.R 1.8
Radiation Direction
Horizontal Beam width 75
Vertical Beam width 55
Polarization Vertical
Lightning Protection DC Grounded
Maximum Input Power 50W
Impedance 50
Connector N Female
Cable Type RG58U
Cable Length 30cm
Antenna Radome Material ABS
Mount way Pole
Diameter of Installation Pole 30~50mm
Mechanical
Dimensions 630x210x50mm
Weight 880g
Operating Temperature -40 to+70
Rated Wind Velocity 60m/s
RoHS Compliant YES

Electrical
Frequency Range 600-960/1710-2700/3300-3800MHz
Gain 4/6/7dBi
V.S.W.R 2.0
Radiation Omni-Direction
Polarization Vertical
Maximum Input Power 50W
Impedance 50
Connector N Female
Cable Type SFF-141
Cable Length 30cm
Antenna Radome Material ABS
Mount way Ceiling Mount
Mechanical
Dimensions 160x18mm
Weight 174g
Operating Temperature -40to+80
RoHS Compliant YES

We provide OEM,ODM service,you can customized your own design,put with your logo etc


From coil to the magnetic sheet/plastic or electronic parts/accessories,we can provide one step solution service with cost saving .

You can customized the wire material,wire size,coil dimension,coil turns, coil thickness, magnet,leading wire,resistance, inductance etc.

Wire size: start from 0.011mm -1.3mm /customized Coil Size: 0.1-3MM To 300MM /Customized
Wire material:enameled copper wire,silk cover /customized
winding style: self-adhensive, wet winding

by automatic and semi-automatic machine over 400

Coil Style:inductor coil,self-bonding coil,bobbin coil, hearing adis coil, antenna coil, ,RFID Coil, Sensor Coil,

Transformers,inductors,

Application of precision coil:

Hearing Aids,sound amplifiers,bluetooth,high-end earphone,medical equipment and instruction etc.



Customized service included:

Wire material

Wire size

Coil height

Number of Coil

Inductance

DCR

Etc



Customized process options

Clients Provide the design drawing

Clients Provide the Samples

Clients Provide the detailed data and requirements



Supply drawing is best, or tell us the size, inductance,

resistance, Q value, OD, ID, Turns, thickness, etc.

Sample lead time

1-3 days

Sample delivery

Ship via your agent

Ship via DHL/UPS/TNT/FEDEX/China Post



Bulk order Lead Time

7-15 Days

Supply Ability Of our factory

1000000 Piece/Pieces per Month

Quality Certification:ISO14000,ISO9000,ISO9001

IATF16149

Test Equipment/Laboratory certification:

1:High-Potting

2:combustion flame retardant experiement

3:Cold and hot shock/Thermal Shock

4: constant temperature and humidity test

5: Drop Test

6:the vibration test

7: PCT High pressure accelerated aging test

8: 2D Profile/two dimensional image measurements

9" X-ray fluorescence

ETC

Package: plastic bag. blister divider,carton etc

customized as per your products feature

Shipment

BY AIR,BY EXPRESS,BY SEA,BY TRAIN ETC

EX-WORK,FOB,CIF,DDP,DDU etc


Payment term: T/T L/C 30% Deposit and balance before shipment

This indoor panel antenna is designed for broadband in-building MIMO distribution of modern wireless communication systems as LTE, GSM, CDMA, PCS, 3G, WiFi, WLAN services.

This omnidirectional antenna is specifically designed for broadband in-building distribution of LTE, GSM, CDMA, PCS, 3G, WiFi, WLAN services. The antenna is constructed from lightweight materials suitable for ceiling mounting. The off-white radome blends easily into most building aesthetics.

868/915mHz fiberglass Lora antenna 5.8db

5.8dBi 860-930mHz Fiberglass Antenna

Frequency 860-930MHZ
Impedance 50
VSWR 2.5
Gain 5
Efficiency(MAX) 75%
Return Loss /
Beamwidth 360�°
Connector NJ dual tooth connector
structure Fiberglass


Length 800 ±10mm
Cable /
Salt Spray Test 96H

Operation Temperature -20 ~65
Storage Temperature -30 ~75

THY Precision Medical Micro Molding offers medical micro molding services meets ISO 13485 certified and Class 100K clean room requirements.


At THY Precision, we understand that molding for the medical industry requires the highest levels of repeatability, accuracy and quality. We are prepared to satisfy our medical clients' exacting needs:

1. Apply for disposable medical consumables and laboratory supplies.
2. Medical device qualification ISO 13485 certified and Class 100K injection clean room to ensure high and steady quality.
3. Highest quality medical micro plastic injection molded components.
4. Medical grade titanium alloy used to manufacture highly specialized medical implants.
5. CNC equipment enables manufacturing high quality, precise medical devices and components.


THY Precision provides OEM medical plastic micro parts:
As the medical field demands smaller and smaller sizes, it is our goal to continue to provide a wide range of minimally invasive micro medical components. We specialize in plastic medical devices including chamber filters, dialyzer filters, caps and pump connectors, intravenous infusion drip components, bacteria filters, laboratory consumables, injector cartridge for IOL surgery... etc.


THY Precision manufactures custom medical grade implants:
Titanium medical devices we have made include: spinal implants, bone plates, surgical instruments, artificial joint, knee replacement, blood collection needle, medical shell, medical sterilization accessories, etc.


THY Precision Introduction Video:
[ https://youtu.be/aLFL4EFKoy0 ]