TKDL-II live cable identification instrument is used to identify A particular cable in the power cable setting migration maintenance and fault treatment to identify A cable in the cable. It has the characteristics of accurate fast simple operation and wide application. It is an indispensable testing instrument in cable construction and maintenance. The electric/uncharged cable recognition device USES single-chip microcomputer technology to encode and power the transmitting signal at the transmitting end which drives the large calibre calipers to coupling the signal to the live cable. The single chip in the receiver decodes and phase the received phase encoding signal. The target cable is identified from a large bundle of other cables based on the uniqueness of the signal phase characteristics on the target cable. It is a light compact compact lithium battery powered portable instrument. Suitable for all kinds of high and low voltage power cables.
1. Charged identification and un-charged identification function combined not only for identification and judgment of cable outage but also for the identification and judgment of live cables the operation is extremely simple very easy to use.
2. The instrument lithium battery-powered you can work continuously for 3 to 5 hours suitable for field use of passive field.
Product Overview
TKKGG-H Series HV/LV Switch Cabinet Test Bench is mainly applied for ex-work energized testing for high voltage and low voltage cabinet manufacturers. The test bench could provide various AC/DC power source in order to detect switch cabinet.
Features
Reading directly: Digital meters to display current voltage power factor test value.
Measuring accurately: High precision test value is accurate.
Full protections: Each circuit is with air switch protection.
1.Description
Chase friction testing machine is used to evaluate the frictional characteristics of material in braking system in accordance with the SAE J661,GB 5763-2018 and GB/T 17469-2012.
Chase machine is suitable for small bench test of M1, M2, N1, O1 and O2 vehicles brake linings.
This machine is widely used for product formulation R&D, Quality control and Certification etc.
2.Principle
A constant pressure is applied to the sample,which will be pressed against the inner surface of the friction drum which rotates at a certain speed, so a friction force will be generated along the tangent direction of the contact surface. The friction
coefficient of the tested sample can be determined by measuring the pressure and friction force.
During the test, the Chase friction tester controls the temperature change at any time according to the requirements. The drum outer ring is used to assist the heating tube heating and the back suction cooling, so that the temperature change at the sample is stable and the temperature measurement accuracy is higher.
3.Features
(1)Loading by Pneumatic servo with high precision control.
(2)Temperature of friction drum is adjustable to adapt to different test requirements and different climatic condition.
(3)Rubbing speed can be set freely between 0 and 1000 RPM.
(4)The maximum load is up to 2000N.
(5)This machine is controlled by PC. Speed, loads, temperature and test time can be preset by software. Test results are saved in computer.
4.Standards
SAE J661, SAE J866, GB 5763-2018, GB/T 17469-2012,
5.Specifications
Speed 0 to 1000 RPM
Load 0 to 2000 N
Temperature 0-600 (1112)
Heating power 6KW
Friction drum Ф277mm
Power AC 380V
Weight Approximate 2100kg
With vast experience in the domain, we are actively involved in offering a world class collection of Electrical Switchgear. We are readily engrossed in rendering a comprehensive variety of industrial and domestic protection devices with superior quality and best price. We deal in MCB, MCCB, RCCB, RCBO, Isolator, Air Circuit Breaker & Accessories, Thermal Adjustable Breaker from major brands.
87826 Electrical Household Other Goods Components Suppliers
Short on time? Let Electrical Household Other Goods Components sellers contact you.
1. Size of concrete specimens for compression strength test
Concrete cubic specimen: 150X150X150mm, 100X100X100mm, 200X200X200mm
Cylindrical concrete specimen: diameter 150X300mm, diameter 100X200mm, diameter 200X400mm
2. Brief introduction of concrete compressive strength test procedure
1) Placing the concrete specimen---place the test specimen on the lower bearing block. Carefully align the axis of the specimen with the center of thrust of the spherically seated block.
2) Apply the load continuously and without shock until the specimen fails and record the maximum load carried by the concrete specimen during the test. Note the type of failure and the appearance of the concrete.
3.Relative test method
GB/T 50081 standard for test method of mechanical properties on ordinary concrete
ASTM C39 standard test method for compressive strength of cylindrical concrete
ASTM E74 practice of calibration of force-measuring instruments for verifying the force indication of testing machine
4. Specifications for concrete compressive strength testing machine
Max. capacity: 3000KN( lower or higher capacity can make to order)
Grade of testing machine: grade 1
Distance between upper and lower compression platen: 320mm
Stroke of piston:50mm
Size of upper and lower compression platen:375X375mm
Weight :about 900kg
1. Introduction and test principle of compression strength measuring
The compression testing machine is to measure compression strength of corrugated boxes in the situation of pressure and protect functions of packages for the objects filled in the packages.
Test principle:
(1) Corrugated boxes compression strength test, loading to the corrugated boxes using a compression testing machine at a certain constant rate untill corrugated boxes are broken or till certain load or displacement are reached.
(2) Corrugated boxes stacking test, loading a certain force to the corrugated box using a compression testing machine untill corrugated box is broken or sustain a certain time period.
When measuring deformation of corrugated box during compression test, an original load should be set as a datum point. The datum point can refer to the following chart:
Average compression force(N)Original force(N)
101-200 10
201-1000 25
1001-2000 100
2001-10000 250
10001-20000 1000
200001-100000 2500
2. Functions of compression testing machine
This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.
3. Specification of compression testing machine
1 Max. Load 20KN
2 Resolution of test force 1/300000
3 Resolution of displacement 0.001mm
4 Precision of crossbeam displacement 0.5%
5 Precision of deformation 0.5%
6 Measuring range of test force 1%-100%FS
7 Relative error of test force 1%
8 Relative error at zero point 0.5%
9 Speed of crossbeam 0.01-500mm/min
10 Precision of crossbeam speed 1%
11 Speed range of load 0.005%-5%FS/s
12 Precision of load speed When speed is less than 0.05FS/s, precision is within 1% of set value, when speed is more than 0.05FS/S, precision is within 0.5% of set value
13 Speed of deformation 0.005%-5%FS/s
14 Precision of deformation speed When speed is less than 0.05FS/s, precision is within 1% of set value, when speed is more than 0.05FS/S, precision is within 0.5% of set value
15 Stroke of crossbeam 900mm
16 Effective tensile height 650mm
17 Effective test span 400mm
18 Effective compression height 800mm
19 Diameter of compression platen 100mm
20 Voltage and power 220V,50Hz, 700W
21 Dimension of main machine 650X450X1650mm
22 Weight of main machine about 300kg
High voltage distribution switchgear
1) general
A complete set of indoor equipment of a single bus bar or double bus bars segmented system rated at 3kvto 12 kv in voltage and 50 hz in frequency.
It has the functions of receiving & distribution power, and controlling, protecting and measuring circuit
2) advantage
1:anti-corrosion cabinet, can be used in complex working condition2:intelligence and easy control
3:multi protection function
4:easy operation and maintenance
5:removable and full closed
3. Applications of testing machine
This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.
4. Features of testing machine
1) Adopting aluminum alloy cover, with attractive streamline structure
2) Mainly used to test mechanical properties for metal, non-metal and composite materials
3) Adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications
4) After test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out.
5) With remote control box to realize speed adjustment of crossbeam, flexibly and freely switched
6) With functions of automatic return to original position, intelligently, efficiently, quickly
7) With limit position function of any working position and over voltage, over current protection functions, reliable and safe
8) With many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control
9) Switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison.
• conformity to international standards – iec, ul, csa, ce
• 9-150 amps, 3 and 4 pole versions, ac/dc coils
• high temperature limits
• different levels of power and control contacts
• inbuilt 1 no + 1 nc auxiliary contacts
• high electrical life
• fuse-less type 2 coordination charts available
• ever higher performance for your motors assured by:
- the factory settings, which provide a high quality drive from the very first time the power
Is turned on
- the integration of standard (u/f), performance (sensorless flux vector control, or svc)
And pump/fan (quadratic profile kn²) control profiles
- high dynamic performance on acceleration as well as on braking
- excellent speed regulation on machine load surges
• reduced noise and maintenance:
- no fan on models up to 0.75 kw at 240 v
- cassette type fan, operates automatically on detection of specific temperature setting
• designed for easy fitting and wiring of the drive:
- a single tool
- power terminals not tightened, ready for wiring
- easy access angles
- numerous, easy to identify markings
• fast detection and protection against the motor current peaks associated with certain
Applications (motor switching, catching on the fly, etc.)
• perfect integration of single-phase 240 v model into the electrical network thanks to
Its built-in emc filter
PT-100 WZPK-330 Nusa Penida power
Since its establishment, YOYIK has always adhered to the principle of technology first and quality first. It has a team of senior engineers and technical workers in the industry. They integrate their rich experience in power station construction into product design and manufacturing to ensure efficiency and accuracy in every link. The company provides a full chain of services from equipment selection to after-sales maintenance, guided by customer needs, continuously optimizes solutions, and promotes the development of the energy industry.
Yoyik can offer many spare parts for power plants as below:
#DF-PT-100 WZPK-330 Nusa Penida power-DF
Heater for low woltage switchgears DRJ100 100W
Rotor Position proximity Transducer ES-11
Power unit FDPC200-A
LIMIT SWITCH WL-CA2-2
resistive linear position sensor TDZ-1E-43 0-135
CBU Board CS05711OU
Sensor DF310806
Transmitter Vibrasi Fan Dual vibration monitor PDM1201-AXX-B1-C0-D1- E2-F0
Thermistor HSDS-40/Z
SPEED MONITOR XJZC-03A/Q
AMMETER 6C2-A
LVDT Sensor 4000TD-15-01
LVDT Converter ZDET-300B
SENSOR VIBRATION VELOCITY SZCB-01-A2-B1-C3
mag pickup speed sensor NE3971-31-90-08-02-00
RTD WRP2-221
high temperature lvdt TDZ-1E-03
CARD MODULE MODUL POWER 2SA5031-5EE13-4BA4-Z
ROTOR ECCENTRICITY PR6424/010-010
DF Communication cable RS232
Socket for relay 62.33.9.220.0300
Diode MDC-55A-1400V
automatic temperature WSSX-411 0-100â?? L=75MM M27*2
Temp sensor PT100 WZPM2-08-120-M18-S
Bolt electric heating rod ZJK3-12
Serial Communication Card PCA-485B
8mm Eddy Current Sensor TM301-A02-B00-C00-D00-E00-F00-G01
LVDT transmitter XCBSQ-01/600-01-01
speed sensor CS-3-M10-L220
Synchronous signal measuring card U12
thermal resistor sensor TR-301-306
Shear Pin CJX-09
DC bolt heater (hose) ZDK/�¦22*650*460
magnetic pickup distributor ZS-04 L=90
Temperature measuring element WZPMA8.7*16B-3*800
Sensor DF312580-90-02-02
PT-100 WZPK-330 Nusa Penida power
MY-DFYL-2025-3-6
Heater for low woltage switchgears DRJ100 100W
YOYIK has laid out the market with a global vision and established a wide network of power station spare parts sales and service in China to ensure that it can quickly respond to the needs of global customers. The company's products are exported to many countries and regions. By providing products and services with international standards, YOYIK has established a good brand image in the international market.
Yoyik can offer many spare parts for power plants as below:
#DF-Heater for low woltage switchgears DRJ100 100W-DF
proximity sensor rpm measurement CWY-DO-812506
LVDT sensor TDZ-FRD-301
Air Pressure Regulator 67CFR-225/SB
Pressure Switch 52RN-KK116-M1-C2A-XX618
Turbidimeter LPV417.99.00002
Middle Relay JZX-22F
positioner DVC2000
NEPM meter KV
type b thermocouple WREK2-331
Limit Switch ( SOLDO SX01200-10U77A3
Rotor Position proximity Probe ES-11-M14x15-B-00-05-10
Camera IST-M938SRZ 900TV
High energy igniter DKGP-20
Sensor for measuring H2 purity KQL1500
Electric actuator SND-Z30-24S
Bolt electric heating rod ZJ-20-T1(R)
Limit Switch D4A-4501N
cam bien ap luc truoc luoi chan rac 9NN-EE45-M4-C1A-X371
Digital Temperature Monitor LWK-Z3T8(TH)
lvdt position transmitter DET500B
Bolt electric heating rod ZJ-22-52
Signal modules â?? analog 6ES7232-4HD32-0XB0
dc pressure switch RC861CZ097HSSYMA59
Glass window components TC-SMW-16-5
FLAME IMAGE MONITOR CAMERA LHJTT-II-2EG
Controller for H2 purity analysers DC3500-CE-0Y00-200-10000-00-0
MDC module MDC 100A-1600V
Power free oil inlet automatic circuit breaker RN1UBQ01-HKXS
Differential Pressure Switch 2 4NN-K5-M4-CIA
LVDT transmitter XCBSQ-04/200-02-11
Eddy Current Sensor PR6426/000-001
Displacement Transducer TD-1 100S
speed sensor DF6202-005-050-04-01-01-000
circuit board ME8.530.004
Acoustic conduit DZXL-VI-J
Rotor Position proximity Sensor Extension Cable ESY-80
Heater for low woltage switchgears DRJ100 100W
MV AIS SWGR up to 24kV
IEC62271-200 ( LSC2B PM )
Switchgear for Primary Distribution
Energy Distribution Medium Voltage
Air-insulated, metal-enclosed, metal-clad medium voltage switchgear up to 24kV
Withdrawable ROL Vacuum CB
Full compiance with new IEC 62271-200class ( LSC2B Ã? PM )
Medium Voltage -Switchgear, up to 17.5 kV Type
Application: Power supply system
Power supply companies
Application: Industry
Power stations
Cement industry
Automobile industry
Iron and steel works
Rolling mills
Mining industry
Traction power supplies
Chemical industry
Petroleum industry
Pipeline installations
Offshore installations
Electrochemical plants
Impact specimen gap hydraulic broaching machine is the only instrument gap for processing the qualified sample except the optical curve grinding machine. Because of processing theory once, the identity of processing the gap is very nice. This broaching machine adopts w18cr4v manufacturing, high hardness, wear resistance, and every tool can process the sample as many as 20, 000.
87826 Electrical Household Other Goods Components Suppliers
Short on time? Let Electrical Household Other Goods Components sellers contact you.
