Product Description GGD AC low voltage distribution cabinet has the high ability of segmentation, good thermal stability, agile electric project, convenient combination, high protection class, the frame is built-up by the cold bend steel, the original, such as door, sub panel, louver, sideboard and so on, are all machined by the numerical control machine tool. It ensured the strength and precision of the body of the cabinet. The surface of the cabinet adopt the skill of electrostatic painting, so it has the characters of the high ability of corrosion, good appearance, and it accord with the request of the IEC439, GB7251. Major Technical Data: Rated voltage: 380V Rated frequency: 50HZ Rated current 400-3150A Altitude: More than í¦2000m Spec: GGD-1: 15kA GGD-2: 30kA GGD-3: 50kA.
Product Description XGN2-12 Trunk stationary metal sealed switchgear (hereinafter called switchgear) is used in the distribution system of 3. 6-12KV three phase 50Hz for electricity reception and distribution. It is especially suitable for the place where the operation is running frequently. Its bus bar system has the structure of single or double bus bar. We can also supply the type of insulation strengthened products according to the requirements of customers. This switchgear is in accordance with the standard of 'GB3906 3-35KV Metal Closed AC Switchgear' .
ASN3-12 air-insulated metal-clad enclosed switchgear is a new mv switchgear on the basis of introducing advanced techniques from foreign, abstracting our experiences in manufacturing the center located switchgear and assembling the world top class numeral controlled equipments. It is major used in 3.6~12kv 3-phase ac50/60hz power system to receive and distribute electrical power. Also it is used to control, protect and monitor the circuit. 1.The surfaces of conductors in the primary circuit are all disposed with vulcanization process. Thus the insulation lay have the characteristic of good attachment, high temperature endurance and even surface comparing with the static electricity process. 2.The frame is made of aluminum-clad zinc board together with rivet nut and high strength bolt. 3. Can be fitted with vn3 series center located high voltage ac vacuum circuit breaker. 4. With the function of manual urgent open switch, the operation is more convenient. 5. Equipped with new ek6 earthing switch, which make the operation convenient and the maintenance easily. 6.All switch operation is proceed with the door of high voltage compartment closed. Also the switchgear has the function of forcible closing the door and the safety is higher. The door can endure the inside fault current.
ASN2-24 air-insulated metal-clad enclosed switchgear is a necessary power distribution equipment in 24kV 3-phase AC50/60Hz power system. It is used in power generator, substation, factory and high building as a equipment of receiving and distributing electrical power. Also it is used to control, protect and monitor the circuit. The switchgear accords with the standard of GB3906, DL/T404 and so on. 1. Busbar is covered with shrinkable insulated material or disposed with epoxy, which make the electrode improved and the body of the switchgear compact. 2. The frame of switchgear is made of top quality aluminum-clad zinc plate through rivets and has characteristic of higher strength, rapider assembled efficiency and more artistic appearance. 3. According to functions the trolley can be divided into circuit breaker trolley, voltage transformer trolley, metering trolley, isolation trolley. The same kind trolleys can be exchanged freely. 4. Can be fitted with VN2 series center located high voltage AC vacuum circuit breaker. 5. There are clapboards between function compartments and individual pressure relief passage. 6. The instrument board is with applicable inclined angle so the operation and observation are more convenient. 7. The instrument compartment is a knock-down module, which not only improve the prettiness and safety of secondary wires but also make the maintenance and overhauling more convenient.
2402n-315 differential case 2402n-415 intermediate differential carrier 2402n-331 differential cross 2402n-335 semi-shaft gear 2402n-345 differential pinion
GZS1 Type of indoor metal-clad draw-out switchgear GZS1 indoor metal-clad draw-out switchgear, developed by Shanghai Dahua Electrical company, is suitable for use in AC. 3.6 ~ 12KV, 50Hz,single-busbar or sectioned single busbar switchgear, mainly used in Elec. generating plants, middle / small power stations, power distributing system of enterprises or industries or substations as Elec. power receiving or distributing equipment or big-power H. voltage motor starting equipment, and so on. The switchgear has functions of control, protection and monitoring
Gear reducer Our main products are rv series worm gear speed reducers, ud(l) planetary cone-disk stepless speed variators, the speed reducers specially designed for engineering polishing machines.The products are widely applied in the sections of foodstuff, packing, ceramics, chemicals, textile, pharmacy, carpentry, plastics and printing, etc. New technology & equipments characterise our products with high quality, smaller volume & elegant shape. Standard exporting packing
Switchgear 3000 nos of mps-01 & 2500 nos of mps-02 as per requirements
Switchgear
400v-40.5kv switchgear 1)6kv-40.5kv raing main unit 2)400v-40.5kv metal clad switchgear To the future development, with full passion, endless business chanced and development space, we are looking forward to your joining and cooperation to create splendid tomorrow! Export packing standard
J-tech lightsaber 2921 J-tech lightsaber 2921 Ultra lightness has been designed for military/police/engineer/emergency/outdoor activities user. Small size, light weight is easy to carry. Lanyard system can be bought and attached to it. Water repellency. It has defensive bezel in the front, for defense or attacking purposes. There is a compass in the bottom. Specifications: Material: aircraft grade 6061 aluminum. Power in lumens: 169 lumens (lab notarized) Lamp type: halogen Battery type: 3v cr123a lithium x 3 (batteries not included) Length: 7 1/2 inches N. Weight: 270 g
Switchgear Matel clad & on load change over switchgear
1xN mechanical optical switch is a kind of light path control equipment,Can realize multi-channel fiber optic light path switching,In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features Low Insertion Loss Wide Wavelength Range TTL level control, easy to control Imported components, better stability Drive circuit breakdown self check function Modular design, convenient for secondary development
Model: RS-EV-AMT-T1S300-01 Warranty: 12 months Place of Origin: Guangdong, China Brand Name: rawsuns Certification: - Car Model: M1 and N1 models and M2 and N2 models Size: - Name: Rawsuns NEW reducer 350Nm 12000rpm parallel shaft gear box ratio 3.043 Maximum input torque: 350Nm Maximum input speed: 12000r/min Reduction ratio: 3.043 Lubricating oil volume: 0.8L Weight: 22.5kg Recommended application models: M1 and N1 models, M2 and N2 models no more than 4.5 tons Recommended application system: pure electric system, extended-range hybrid power system PAYMENT: 100% T/T in advance
Model: RS-EV-AMT-T1SF300-01 Warranty: 12 months Place of Origin: Guangdong, China Brand Name: rawsuns Certification: - Car Model: M1 and N1 models Size: - Name: Rawsuns GOOD ratio 9.04 12000rpm ev gearbox reducer for car Maximum input torque: 350Nm Maximum input speed: 12000r/min Reduction ratio: 9.04 Lubricating oil volume: 1L Weight: 33kg Recommended application models: M1 and N1 models Recommended application system: pure electric system, extended-range hybrid power system PAYMENT: 100% T/T in advance
Warranty: 12 months Place of Origin: Guangdong,China Brand Name: rawsuns Model Number: R1SF400 Type: Synchronous Motor Frequency: 50/60Hz Phase: Single-phase Certification: ce Protect Feature: Waterproof AC Voltage: 115/120 V Efficiency: IE 1 Maximum input torque(Nm): 320 Max input speed(r/min): 10000 Reduction ratio: 12.48 Lubricating oil quantity(L): 1.2 Weight(kg): 38 Product Name: ev conversion kit ev motor electric motor Application: 3-5t Hiace model
Product Overview TKKGG-H Series HV/LV Switch Cabinet Test Bench is mainly applied for ex-work energized testing for high voltage and low voltage cabinet manufacturers. The test bench could provide various AC/DC power source in order to detect switch cabinet. Features Reading directly: Digital meters to display current voltage power factor test value. Measuring accurately: High precision test value is accurate. Full protections: Each circuit is with air switch protection. Portable: Small size light weight easy to move.
aproximitely description dediceted for RS-S Switchgear design: Material - aluminum sheet. Connection method - welding or twisting. Varnishing - covered with polyester powder varnish in the basic color RAL 7035 or other colors on request. Roof Ventilation - gravity labyrinth. Bottom - cable channel, flat plate or bottom Installation of equipment - angles enabling the adjustment of the depth of equipment installation. Doors - double-sided, separate on each part, opened at an angle of 180 �° with a blockade. Lock - master key locked with a padlock or system insert. Hinges - internal stainless. Mounting - galvanized post clam.
KYN28 drawout type indoor metal-enclosed switchgear assemblies Rated voltage:12KV,24KV,35KV Rated current:200A ,630A,1250A,2000A,3150A Breaking capacity:25KA,31.5KA KYN28 indoor metal-clad switchgear is a complete power distribution device for 3.6~24kV,3-phase AC50/60Hz,single-bus and single-bus sectionalized system. It is mainly used for power transmission of middle/small generators in power plants; power receiving, transmission for substations in power distribution and power system of factories, mines and enterprises, and starting of large high-voltage motor, etc.,so as to control, protect and monitor the system. The switchgear meets IEC298,GB3906-91.In addition to be used with domestic VS1 vacuum circuit breaker, it can also be used with VD4 from ABB, 3AH5 from Siemens domestic ZN65A, and VB2 from GE, etc.,it is truly a power distribution device with good performance. In order to meet the requirement for wall mounting and front-end maintenance, the switchgear is equipped with a special current transformer, so that the operator can maintain and inspect it in front of the cubicle.
The SF6 insulated switchgear is suitable for middle voltage power distribution system with a rated voltage of 12kV. It could be used as RMUs in a power supply network, fault isolating switches and sectionalizing switches. If equipped with distribution automation devices (FTU/DTU) and communication devices, the SF6 insulated switchgear could communicate with the control center, measure the cable voltage, current, etc, and monitor the working status of switches. BKRM6- 40.5 series of ring main unit is SF6 gas- insulated metal common tank enclosed switchgear, consisting of load break switch unit, load break switch fuse combination electrical unit, vacuum circuit breaker unit, and the incoming line unit of bus. It adopts a range of advanced technologies and materials, with excellent electrical and mechanical properties, less affected by environment and climate, in small size, easy to install easy to operate, with no need of maintenance, and can be flexibly combined. Its clear and intuitive design ensures simple and direct operation, the feeder's connection capacity is large, suitable for a variety of wiring systems. Besides,we can replace the SF6 gas with nitrogen(N2 gas) that it will become a environment protection green gas insulated switchgear. The green gas insulated switchgear safer and environmentally friendly more than SF6 GIS and it will replacing SF6 GIS in the future.
