Electrical switch gear.
JPF2 fixed type metal-enclosed switchgear assembled from modular elements of SF6 insulated switch-disconnector, SF6 switch-fuse combination or vacuum circuit-breaker, in compliance with IEC 298, IEC 420 standards. It is suitable for switching of load current, and controlling the network. It is widely used in medium voltage public distribution systems, high/low voltage prefabricated substation and ring main units. Ratings Rated voltage (kV) 24 Rated bus bars current (A)630 Rated feeder current (A)630 Rated peak withstand current (kA)50 Rated short-time withstand current 2s (kA)20 Cubicle dimension W375(500, 750)*D900*H1900
JPU1-12 Medium Voltage SF6 ring main unit (SF6 RMU, Abbreviation), with the character of excellence reliability and maintenance free, is suitable for AC 3.6 to 12kV power distribution system with configuration either ring or radiant. Its all live part including LBS, CB, ES and primary busbar are sealed in the tank made of stainless steel and the elbow-shape cable connectors are adopted for the incoming or out-going, that leads to the RMU has less influence from service condition therefore it is suitable for using in the bad ambient condition and relatively restricted space. Its service life is more than 20 years. JPU1-12 is compliance with IEC 694, IEC 60265-1/FDIS, IEC 62271-100, IEC 62271-102, IEC 298 & IEC 420. Ratings Rated voltage (kV): 12 Rated load current (A): 630 Rated fuse current (A): 100 Rated breaking current (kA): 50 Rated peak withstand current (kA) 125 Rated short-time withstand current (kA)25 PFWV (kV): 42/48 BIL (kV): 76/85 Cubicle size (mm): W (various)xH1570XD800 Veneer packing
Product Description GG-1A(F) Mistake-prevention high voltage switchgear is made out of the stationary high voltage switchgear by adding the mistake-prevention locking device. It can be applied to the 3. 6-12KV three phase and 50Hz single bus bar system for electricity reception and distribution. It is a stationary indoor type.
Product Description GGD AC low voltage distribution cabinet has the high ability of segmentation, good thermal stability, agile electric project, convenient combination, high protection class, the frame is built-up by the cold bend steel, the original, such as door, sub panel, louver, sideboard and so on, are all machined by the numerical control machine tool. It ensured the strength and precision of the body of the cabinet. The surface of the cabinet adopt the skill of electrostatic painting, so it has the characters of the high ability of corrosion, good appearance, and it accord with the request of the IEC439, GB7251. Major Technical Data: Rated voltage: 380V Rated frequency: 50HZ Rated current 400-3150A Altitude: More than í¦2000m Spec: GGD-1: 15kA GGD-2: 30kA GGD-3: 50kA.
Product Description XGN2-12 Trunk stationary metal sealed switchgear (hereinafter called switchgear) is used in the distribution system of 3. 6-12KV three phase 50Hz for electricity reception and distribution. It is especially suitable for the place where the operation is running frequently. Its bus bar system has the structure of single or double bus bar. We can also supply the type of insulation strengthened products according to the requirements of customers. This switchgear is in accordance with the standard of 'GB3906 3-35KV Metal Closed AC Switchgear' .
ASN3-12 air-insulated metal-clad enclosed switchgear is a new mv switchgear on the basis of introducing advanced techniques from foreign, abstracting our experiences in manufacturing the center located switchgear and assembling the world top class numeral controlled equipments. It is major used in 3.6~12kv 3-phase ac50/60hz power system to receive and distribute electrical power. Also it is used to control, protect and monitor the circuit. 1.The surfaces of conductors in the primary circuit are all disposed with vulcanization process. Thus the insulation lay have the characteristic of good attachment, high temperature endurance and even surface comparing with the static electricity process. 2.The frame is made of aluminum-clad zinc board together with rivet nut and high strength bolt. 3. Can be fitted with vn3 series center located high voltage ac vacuum circuit breaker. 4. With the function of manual urgent open switch, the operation is more convenient. 5. Equipped with new ek6 earthing switch, which make the operation convenient and the maintenance easily. 6.All switch operation is proceed with the door of high voltage compartment closed. Also the switchgear has the function of forcible closing the door and the safety is higher. The door can endure the inside fault current.
ASN2-24 air-insulated metal-clad enclosed switchgear is a necessary power distribution equipment in 24kV 3-phase AC50/60Hz power system. It is used in power generator, substation, factory and high building as a equipment of receiving and distributing electrical power. Also it is used to control, protect and monitor the circuit. The switchgear accords with the standard of GB3906, DL/T404 and so on. 1. Busbar is covered with shrinkable insulated material or disposed with epoxy, which make the electrode improved and the body of the switchgear compact. 2. The frame of switchgear is made of top quality aluminum-clad zinc plate through rivets and has characteristic of higher strength, rapider assembled efficiency and more artistic appearance. 3. According to functions the trolley can be divided into circuit breaker trolley, voltage transformer trolley, metering trolley, isolation trolley. The same kind trolleys can be exchanged freely. 4. Can be fitted with VN2 series center located high voltage AC vacuum circuit breaker. 5. There are clapboards between function compartments and individual pressure relief passage. 6. The instrument board is with applicable inclined angle so the operation and observation are more convenient. 7. The instrument compartment is a knock-down module, which not only improve the prettiness and safety of secondary wires but also make the maintenance and overhauling more convenient.
2402n-315 differential case 2402n-415 intermediate differential carrier 2402n-331 differential cross 2402n-335 semi-shaft gear 2402n-345 differential pinion
GZS1 Type of indoor metal-clad draw-out switchgear GZS1 indoor metal-clad draw-out switchgear, developed by Shanghai Dahua Electrical company, is suitable for use in AC. 3.6 ~ 12KV, 50Hz,single-busbar or sectioned single busbar switchgear, mainly used in Elec. generating plants, middle / small power stations, power distributing system of enterprises or industries or substations as Elec. power receiving or distributing equipment or big-power H. voltage motor starting equipment, and so on. The switchgear has functions of control, protection and monitoring
Gear reducer Our main products are rv series worm gear speed reducers, ud(l) planetary cone-disk stepless speed variators, the speed reducers specially designed for engineering polishing machines.The products are widely applied in the sections of foodstuff, packing, ceramics, chemicals, textile, pharmacy, carpentry, plastics and printing, etc. New technology & equipments characterise our products with high quality, smaller volume & elegant shape. Standard exporting packing
Switchgear 3000 nos of mps-01 & 2500 nos of mps-02 as per requirements
Switchgear
400v-40.5kv switchgear 1)6kv-40.5kv raing main unit 2)400v-40.5kv metal clad switchgear To the future development, with full passion, endless business chanced and development space, we are looking forward to your joining and cooperation to create splendid tomorrow! Export packing standard
J-tech lightsaber 2921 J-tech lightsaber 2921 Ultra lightness has been designed for military/police/engineer/emergency/outdoor activities user. Small size, light weight is easy to carry. Lanyard system can be bought and attached to it. Water repellency. It has defensive bezel in the front, for defense or attacking purposes. There is a compass in the bottom. Specifications: Material: aircraft grade 6061 aluminum. Power in lumens: 169 lumens (lab notarized) Lamp type: halogen Battery type: 3v cr123a lithium x 3 (batteries not included) Length: 7 1/2 inches N. Weight: 270 g
Switchgear Matel clad & on load change over switchgear
Fiber array, PLC splitter, CWDM, circulator, coupler, isolator, optical switch, patch cord, V-groove, pigtail.Exporter
One important element of good power system design is the proper selection of the distribution equipment. The choice of using either switchgear or switchboards must be based on many different criteria and the design of the power system requires thought be given to each one. Tungwell's sister company CPEPEC is a vertically integrated manufacturer and fabricator of engineered material solutions for switchgear applications. We manufacture custom material solutions for the following types of equipment: Medium & High Voltage Circuit Breakers Pad Mounted (Live & Dead Front) Medium Voltage Switchgear Metal Clad Medium Voltage Switchgear Automatic Transfer Switches Motor Control Switchgear Metering Equipment Low Voltage Switchgear Panelboards Switchboards We supply a complete line of insulating components for a broad range of switchgear designs. These components and spare parts can be provided individually or in complete kits for a particular type of switchgear.
1xN mechanical optical switch is a kind of light path control equipment,Can realize multi-channel fiber optic light path switching,In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features Low Insertion Loss Wide Wavelength Range TTL level control, easy to control Imported components, better stability Drive circuit breakdown self check function Modular design, convenient for secondary development
Model: RS-EV-AMT-T1S300-01 Warranty: 12 months Place of Origin: Guangdong, China Brand Name: rawsuns Certification: - Car Model: M1 and N1 models and M2 and N2 models Size: - Name: Rawsuns NEW reducer 350Nm 12000rpm parallel shaft gear box ratio 3.043 Maximum input torque: 350Nm Maximum input speed: 12000r/min Reduction ratio: 3.043 Lubricating oil volume: 0.8L Weight: 22.5kg Recommended application models: M1 and N1 models, M2 and N2 models no more than 4.5 tons Recommended application system: pure electric system, extended-range hybrid power system PAYMENT: 100% T/T in advance
