Radial bearing and double-direction thrust bearing are installed in the sealing bearing cavity of the motor rotator with the impeller. The dynamic seals of the rotary bearing cavity adopt floating seals or mechanical seals to prevent water from entering into the bearing cavity.
Nominal outlet diameter: 350-3200mm
Head: 0-10m
Flow rate: 0.4-25 m3/s
Power:22-1500kw
Voltage: 380v, 660v 3kv, 6kv, 10kv
Water conditions:
Water temperature=50 deg.C
Ph value: 4-10
Water quality is mild sewage water. The equivalent diameter of allowed articles =1/10 of nominal outlet dia., and there is no plenty of fiber sundries.
To transfer the extract from storage tank to evaporator balance tank in Herbal and Solvent Extraction Plants. To transfer the liquid and process the liquid from one to other vessel in Pharmaceutical Plants and Chemical Plants.
Product features:
1. Safety: water and electric separately.
2. Hot water ( 55° c ) an be provided constantly even ambient temperature down to -25° c.
3. Evi special compressor of copelnd, sanyo or hitachi will be used, relibale quality with high performance.
4. Auxiliary eletric heater, insulation materials used for compressor protection.
5. Convenient: intelligent microprocessor with touch screen display. Trouble shoot shows on display board automatically.
6.World famous brand compressor, 4-way valve, motor, pcb, heat exchanger, emerson alco expansion valve used.
7. Multiple protection function: high pressure, low pressur, overheating, overload anti-freezing, phase sequence,
Discharge temperature, suction temperature and so on.
8. All weather operation: stable operation without being influenced by weather.
9. Anti-corrosion: plastic case, coated steel or sus304# stainless steel case are available.
10. Refrigerant of r22, r407c, r134a are for optional.
11. automatically defrosting function included.
Technical parameter:
Unitsdbt-24wl
Heating capacitykw24.00
Heating power inputkw5.70
Operating currenta8.70
Copw/w4.2
Power supply v/ph/hz380/3/50-60
Rated output water temp.°c55
Maximum output water temp.°c60
Compressortypescroll(evi compressor)
Refrigerant typer407/410a
Lengthmm715
Widthmm715
Heightmm1050
Unit noise level de(a)56
Net /gross weight kg135-160
Certificationcb, ce, emc, rohs, saso, ccc
Features
Size range (discharge)
2¡à to 14¡à
50 mm to 350 mm
Capacities
To 14, 000 gpm
To 3, 150 m3/hr
Heads
To 120 ft
To 37 m
Heavy duty froth pump for tough flotation froth duties
Designed to handle heavy froth, the yaobang horizontal froth pump has a unique inlet and impeller design that is very successful at pumping froth.
Benefits
Bearing assembly ¡§c a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Liners ¡§c easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints.
Casing ¡§c casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
Impeller ¡§c unique impeller inducer blade handles heavy froth and higher viscosity dense slurries with ease
Throatbush ¡§c wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
1200*1000*900mm 3inch 1950kg
2177 Electric Pumps Suppliers
Short on time? Let Electric Pumps sellers contact you.
To 37 m
Heavy duty froth pump for tough flotation froth duties
Designed to handle heavy froth, the yaobang® horizontal froth pump has a unique inlet and impeller design that is very successful at pumping froth.
Details:
Yn series dredge pumps are horizontal cantilevered single stage , single suction pump. Generally. Large dredging depth, high density of dredging mud, good npsh and strong suction lift ability. It is used in submarine. Can meet all the requirements from the dredge.
Specification:
Capacity/flow: 1800-25000m3/h
Head / lift: 20-78m
Speed: 180-550 rpm
Medium density:
Ph of medium: 5-12
Caliber: 300mm -1000mm
Arcing is eliminated. Connect the red battery clamp to the positive battery terminal. Connect the black
Clamp to the negative or ground to a rigid metallic surface on the engine. The connection should be 12 to 19 inches from the battery.
4.Hose:
Since the pump has a lower discharge pressure it is ., recommended that anoncolapsiable hose be used for maximum pumping capacity.
5.Hoisting & lowering:
Use the attached nylon line. Do not use the power cord ., for handling the unit.
6.Operation of unit:
Lower the unit into the liquid to be pumped(note: this unit is not to used to pump
Flamable liquids).Then turn on the switch.
Pump can be run for a few minutes(less than 5) without liquid. Do not run completely dry for any extended period(less than 5 min.).This will prevent.
7.Running time peroids:
The unit draws 20-25 amperes and can be operated for approximately 1 hr. On a fully charged 60 amp-hour battery and still be able to start the vehicle under normal conditions. Caution should be used when running times exceeds 25 !v 30 minutes without the engine running to recharge the battery. Also be mindful of cold temperatures which lowers battery
1.1/2" solids handling
2.Heavy duty lip & mechanical seals in tandem
3.115 & 230 volts available
4.60hz
5.Durable cast iron motor housing
6.115 & 230 volt piggyback power plug and switch
Plug w/20' cord as standard
Dshhgp1-2021-60hz
2 hp grinder pump
1.Ideal for long discharge runs or high static heads
2.2 piece motor housing
3.Separate cord cap assembly
4.Internal capacitors - no control box req'd ductile iron impeller, recessed, clog-free dual silicon carbide seal - grit resistant stainless steel grinder assembly effectively macerates domestic sewage into a fine slurry
5.30 year proven design
The mud pump to the crank connecting rod structure , triplex single acting piston horizontal pump, piston for lip sealing, made of rubber or ptfe and nylon mat pressing and into
The pump adopts the automobile gearbox, variable five flow, equipped with seismic pressure gauge and necessary spare parts, disassembling tools
Rated flow 250 145 90 52260 167 106 60 35
Piston reciprocating frequency 200 116 72 42187 121 76 43 25
Suction pipe size ¦õ76¦õ89
Drain pipe size ¦õ51¦õ50
Electric motor Model Ybk2-160l-4Ybk2-225m-4
Power 1545
Fully mechanized working face double-drum shearer with high-pressure water spray out the dust
Reduce air in working face of coal dust, improve working conditions in the working face
The pump station is composed of two spray pump and a water tank, one of the pump work, the other a standby pump
2177 Electric Pumps Suppliers
Short on time? Let Electric Pumps sellers contact you.
